ACI targets specify the set of data to which an ACI applies.
Each ACI target should be surrounded by parentheses and should have the form
An access control instruction can have multiple targets by simply placing them one right
after another such as
All of the ACI targets must appear at the beginning of the ACI, before.
targetattr ACI target is used to grant or deny access
to a specified set of attributes. If multiple attributes are specified, then they
should be separated by two consecutive vertical bars. For example,
(targetattr="givenName||sn||cn") indicates that the ACI applies
to the givenName, sn, and cn attributes.
* can be used as a shorthand notation to
indicate all user attributes, but it does not include operational attributes. The
+ can be used as a shorthand notation to indicate all
operational attributes, but does not include user attributes. If you want an ACI to
apply to all user attributes and all operational attributes, then you can use
It is possible to use the
!= operator to target all user attributes
except a named set. For example,
indicates that the ACI targets all userAttributes except
userPassword. However, this is potentially dangerous because it
is easy for two different ACIs using this construct to cancel each other out. For
example, if one ACI includes
(targetattr!="userPassword") and a
second ACI includes
(targetattr!="socialSecurityNumber"), then the
net effect might be equivalent to
(targetattr="*") because the
first target implicitly includes the
that you’re trying to exclude with the second, while the second implicitly includes
userPassword attribute that you’re trying to exclude with the
first. When access to a specific attribute should not be allowed, it might be better
to create an ACI that denies access to that attribute rather than one that grants
all access to all attributes except that attribute.
target ACI target is used to indicate that the ACI applies to
entries in specified portions of the DIT. The value should be provided as an LDAP
URL, but only the DN portion of that URL is used. For example,
(target="ldap:///dc=example,dc=com") indicates that the ACI
applies to entries at or below “
Each ACI cam have at most one target. If an ACI defined in the user data does not
contain a target element, then the effective target for that ACI the DN of the
entry in which that ACI is defined. If a global ACI does not contain a target
element, then it applies to all entries in the server, including in backends
containing non-user data, like the root DSE, configuration, changelog, schema, and
monitor backends. The
target element can only use the
=” operator. It cannot use the
!= operator to
apply to all portions of the DIT outside of the specified distinguished name
If an ACI defined in user data includes a target element, then
the DN contained in that element must be at or below the DN of the entry that
contains that ACI. For example, the
entry cannot have an ACI that targets entries below
targetfilterelements can be used to narrow down the set of applicable entries.
targetscope ACI target is used to specify how much of the target
subtree is covered by the ACI. These scopes exhibit the same behavior in ACIs as
they do for search operations. Allowed scope values include:
- Indicates that the ACI only applies to the entry specified by the target DN, and not to any of its subordinates.
- Indicates that the ACI only applies to entries that are immediate subordinates of the entry specified by the target DN. Neither the target entry, nor any entries that are more than one level below the target entry, are included.
- Indicates that the ACI applies to the entry specified by the target DN, as well as all entries below it (to any depth).
- Indicates that the ACI applies to all entries below the entry specified by the target DN (to any depth), but does not include the target entry itself.
targetscope element can only use the “
operator. It cannot use the
!= operator. If an ACI does not include
targetscope element, a default value of
targetfilter ACI target is used to identify the set of entries
in the target subtree to which the ACI applies based on their content. The value of
this element is the string representation of an LDAP search filter, such as
targetfilterelement can only use the “
=” operator; it cannot use the “
!=” operator although you can use the “
!” operator in the filter itself to negate its meaning. If an ACI does not include a
targetfilterelement, then all entries within the target subtree and scope are considered applicable.
targattrfilters ACI target is used to identify
individual attribute values to which the ACI applies. This target is used for write
operations, and it can restrict which attributes can be added to or removed from an
The value of this element can have either one or two
components. It can specify a set of attribute values that can be added to the entry
(which must start with
add=), a set of attribute values that can be
removed from the entry (which must start with “
del=”), or both. If
both clauses are present, then they should be separated by a comma.
content of each clause should be in the form of an attribute name followed by a
colon and a search filter that identifies which values will be allowed for that
attribute You can target multiple attributes in the same add or delete clause by
separating them with a double ampersand
del=description:(description=allowedDeleteDescription)") indicates that
the ACI applies to any attempt to add a value of
allowedAddDescription to the description attribute, an attempt
to add a value of
allowedAddDisplayName to the
displayName attribute, or an attempt to remove a value of
allowedDeleteDescription from the description attribute.
The filters can use a variety of logic for identifying which values are allowed. For example, you can use substring filters that include wildcards to match values that start with, end with, or contain a given substring. You can use a presence filter to indicate that any value is allowed. You can use a greater-or-equal or less-or-equal to indicate a range of allowed values. You can use AND and OR filters to combine multiple filters. You can use a NOT clause to negate a filter.
When processing an add operation, the server requires that the requester have permission to add all of the attribute values. When processing a delete operation, the server requires that the requester have permission to delete all of the attribute values. When processing a modify or modify DN operation, the server requires that the requester have permission to add all values introduced in the update and to delete all values removed in the update.The
targattrfilterselement can only use the
=operator; it cannot use the
targetcontrol ACI target is used to indicate which request
controls a requester is allowed to use. The value for this element is the OID for
the desired request control, and multiple request control OIDs can be separated by a
double vertical bar
||. For example,
is used to target requests that use either or both the server-side sort request
control whose OID is “
1.2.840.113518.104.22.1683” and the virtual list
view request control whose OID is
Regardless of the type of control and what action the server can take for
requests that contain it, the read right is used when determining whether to allow
an operation containing the request control. Although it is technically allowed to
include other rights in an ACI that uses the
only the read right is used in making the determination.
targetcontrolelement can only use the
=operator; it cannot use the
extop ACI target is very similar to the
targetcontrol target, except that it is used to indicate which
extended requests a requester is allowed to use. The value can be either a single
OID or a list of multiple OIDs separated by double vertical bars.
targetcontrolelement, only the read right is considered when determining whether to allow a client to request a given extended operation.
The server might impose additional access control rights based on the function
that the extended operation is to perform. For example, for a client to use the
password modify extended operation, the server requires an ACI with an
extop target containing the OID
22.214.171.124.4.1.4126.96.36.199, but it also requires that the
requester have permission to update the
or whatever password attribute has been configured in the user’s password policy
in the target user’s entry.