When a server is installed, it can be added to an existing topology, which will clone the server's. Topology settings are designed to operate without additional configuration. If required, some settings can be adjusted to fit the needs of the environment.
Server configuration settings
Configuration settings for the topology are configured in the Global Configuration and in the Config File Handler Backend. Though they are topology settings, they are unique to each server and are not mirrored. Settings must be kept the same on all servers.
The Global Configuration object contains a single topology setting,
force-as-master-for-mirrored-data. This should be set to
true on only one of the servers in the topology, and is used
only if a situation occurs where the topology cannot determine a master because a
majority of servers is not available. A server with this setting enabled will be
assigned the role of master, if no suitable master can be determined. See Topology master requirements and selection for details about
how a master is selected for a topology.
The Config File Handler Backend defines three topology
mirrored-subtree-peer-polling-interval– Specifies the frequency at which the server polls its topology peers to determine if there are any changes that may warrant a new master selection. A lower value will ensure a faster failover, but it will also cause more traffic among the peers. The default value is five seconds. If no suitable master is found, the polling frequency is adjusted to 100 milliseconds until a new master is selected.
mirrored-subtree-entry-update-timeout– Specifies the maximum length of time to wait for an update operation (add, delete, modify or modify-dn) on an entry to be applied by the master on all of the servers in the topology. The default is 10 seconds. In reality, updates can take up to twice as much time as this timeout value if master selection is in progress at the time the update operation was received.
mirrored-subtree-search-timeout– Specifies the maximum length of time in milliseconds to wait for search operations to complete. The default is 10 seconds.
Topology meta-data is stored under the
cn=topology,cn=config subtree and cluster data is stored under
cn=cluster,cn=config subtree. The only setting that can be
changed is the cluster name.