java.lang.Object
- org.forgerock.opendj.ldap.ResultCode

```
public final class ResultCode
extends Object
```
An operation result code as defined in RFC 4511 section 4.1.9 is used to indicate the final status of an operation. If a server detects multiple errors for an operation, only one result code is returned. The server should return the result code that best indicates the nature of the error encountered. Servers may return substituted result codes to prevent unauthorized disclosures.

See Also:

RFC 4511 - Lightweight Directory Access Protocol (LDAP): The Protocol

Nested Class Summary

Nested Classes
Modifier and Type Class Description

static class ResultCode.Enum
Contains equivalent values for the ResultCode values.

Field Summary

Fields
Modifier and Type	Field	Description
`static ResultCode`	`ADMIN_LIMIT_EXCEEDED`	The result code that indicates that processing on the requested operation could not continue because an administrative limit was exceeded.
`static ResultCode`	`AFFECTS_MULTIPLE_DSAS`	The result code that indicates that the operation could not be processed because it would impact multiple DSAs or other repositories.
`static ResultCode`	`ALIAS_DEREFERENCING_PROBLEM`	The result code that indicates that a problem was encountered while attempting to dereference an alias for a search operation.
`static ResultCode`	`ALIAS_PROBLEM`	The result code that indicates that the requested operation failed because it attempted to perform an illegal operation on an alias.
`static ResultCode`	`ASSERTION_FAILED`	The result code that indicates that the filter contained in an assertion control failed to match the target entry.
`static ResultCode`	`ATTRIBUTE_OR_VALUE_EXISTS`	The result code that indicates that the requested operation failed because it would have resulted in a conflict with an existing attribute or attribute value in the target entry.
`static ResultCode`	`AUTH_METHOD_NOT_SUPPORTED`	The result code that indicates that the requested authentication attempt failed because it referenced an invalid SASL mechanism.
`static ResultCode`	`AUTHORIZATION_DENIED`	The result code that should be used if the server will not allow the client to use the requested authorization.
`static ResultCode`	`BUSY`	The result code that indicates that the server is too busy to process the requested operation.
`static ResultCode`	`CANCELLED`	The result code that indicates that a request has been cancelled by a cancel request.
`static ResultCode`	`CANNOT_CANCEL`	The result code that indicates that a cancel request was unsuccessful because the targeted operation was one that could not be canceled.
`static ResultCode`	`CLIENT_SIDE_AUTH_UNKNOWN`	The client-side result code that indicates that the user requested an unknown or unsupported authentication mechanism.
`static ResultCode`	`CLIENT_SIDE_CLIENT_LOOP`	The client-side result code that indicates that the client detected a referral loop caused by servers referencing each other in a circular manner.
`static ResultCode`	`CLIENT_SIDE_CONNECT_ERROR`	The client-side result code that indicates that the client was not able to establish a connection to the server.
`static ResultCode`	`CLIENT_SIDE_CONTROL_NOT_FOUND`	The client-side result code that indicates that the client expected a control to be present in the response from the server but it was not included.
`static ResultCode`	`CLIENT_SIDE_DECODING_ERROR`	The client-side result code that indicates that an error occurred while decoding a response from the server.
`static ResultCode`	`CLIENT_SIDE_ENCODING_ERROR`	The client-side result code that indicates that an error occurred while encoding a request to send to the server.
`static ResultCode`	`CLIENT_SIDE_FILTER_ERROR`	The client-side result code that indicates that the filter provided by the user was malformed and could not be parsed.
`static ResultCode`	`CLIENT_SIDE_LOCAL_ERROR`	The client-side result code that indicates that a local error occurred that had nothing to do with interaction with the server.
`static ResultCode`	`CLIENT_SIDE_NO_MEMORY`	The client-side result code that indicates that the client application was not able to allocate enough memory for the requested operation.
`static ResultCode`	`CLIENT_SIDE_NO_RESULTS_RETURNED`	The client-side result code that indicates that the requested single entry search operation or read operation failed because the Directory Server did not return any matching entries.
`static ResultCode`	`CLIENT_SIDE_NOT_SUPPORTED`	The client-side result code that indicates that the user requested an operation that is not supported.
`static ResultCode`	`CLIENT_SIDE_PARAM_ERROR`	The client-side result code that indicates that there was a problem with one or more of the parameters provided by the user.
`static ResultCode`	`CLIENT_SIDE_REFERRAL_LIMIT_EXCEEDED`	The client-side result code that indicates that the client reached the maximum number of hops allowed when attempting to follow a referral (i.e., following one referral resulted in another referral which resulted in another referral and so on).
`static ResultCode`	`CLIENT_SIDE_SERVER_DOWN`	The client-side result code that indicates that the server is down.
`static ResultCode`	`CLIENT_SIDE_TIMEOUT`	The client-side result code that indicates that the client did not receive an expected response in a timely manner.
`static ResultCode`	`CLIENT_SIDE_UNEXPECTED_RESULTS_RETURNED`	The client-side result code that the requested single entry search operation or read operation failed because the Directory Server returned multiple matching entries (or search references) when only a single matching entry was expected.
`static ResultCode`	`CLIENT_SIDE_USER_CANCELLED`	The client-side result code that indicates that the user cancelled an operation.
`static ResultCode`	`COMPARE_FALSE`	The result code that indicates that the attribute value assertion included in a compare request did not match the targeted entry.
`static ResultCode`	`COMPARE_TRUE`	The result code that indicates that the attribute value assertion included in a compare request did match the targeted entry.
`static ResultCode`	`CONFIDENTIALITY_REQUIRED`	The result code that indicates that the requested operation could not be processed because it requires confidentiality for the communication between the client and the server.
`static ResultCode`	`CONSTRAINT_VIOLATION`	The result code that indicates that the requested operation failed because it would have violated some constraint defined in the server.
`static ResultCode`	`ENTRY_ALREADY_EXISTS`	The result code that indicates that the requested operation failed because it would have resulted in an entry that conflicts with an entry that already exists.
`static ResultCode`	`INAPPROPRIATE_AUTHENTICATION`	The result code that indicates that an authentication attempt failed because the requested type of authentication was not appropriate for the targeted entry.
`static ResultCode`	`INAPPROPRIATE_MATCHING`	The result code that indicates that the requested operation failed because it attempted to perform an inappropriate type of matching against an attribute.
`static ResultCode`	`INSUFFICIENT_ACCESS_RIGHTS`	The result code that indicates that the client does not have sufficient permission to perform the requested operation.
`static ResultCode`	`INVALID_ATTRIBUTE_SYNTAX`	The result code that indicates that the requested operation failed because it violated the syntax for a specified attribute.
`static ResultCode`	`INVALID_CREDENTIALS`	The result code that indicates that an authentication attempt failed because the user did not provide a valid set of credentials.
`static ResultCode`	`INVALID_DN_SYNTAX`	The result code that indicates that the requested operation failed because it would have resulted in an entry with an invalid or malformed DN.
`static ResultCode`	`LOOP_DETECT`	The result code that indicates that a referral or chaining loop was detected while processing the request.
`static ResultCode`	`NAMING_VIOLATION`	The result code that indicates that the requested operation failed because it would have violated the server's naming configuration.
`static ResultCode`	`NO_OPERATION`	The result code that should be used if the server did not actually complete processing on the associated operation because the request included the LDAP No-Op control.
`static ResultCode`	`NO_SUCH_ATTRIBUTE`	The result code that indicates that the requested operation failed because it targeted an attribute or attribute value that did not exist in the specified entry.
`static ResultCode`	`NO_SUCH_OBJECT`	The result code that indicates that the requested operation failed because it referenced an entry that does not exist.
`static ResultCode`	`NO_SUCH_OPERATION`	The result code that indicates that a cancel request was unsuccessful because the targeted operation did not exist or had already completed.
`static ResultCode`	`NOT_ALLOWED_ON_NONLEAF`	The result code that indicates that the requested operation is not allowed for non-leaf entries.
`static ResultCode`	`NOT_ALLOWED_ON_RDN`	The result code that indicates that the requested operation is not allowed on an RDN attribute.
`static ResultCode`	`OBJECTCLASS_MODS_PROHIBITED`	The result code that indicates that the operation could not be processed because it would have modified the objectclasses associated with an entry in an illegal manner.
`static ResultCode`	`OBJECTCLASS_VIOLATION`	The result code that indicates that the requested operation failed because it would have resulted in an entry that violated the server schema.
`static ResultCode`	`OFFSET_RANGE_ERROR`	The result code that indicates that a search request included a VLV request control with an invalid offset.
`static ResultCode`	`OPERATIONS_ERROR`	The result code that indicates that the operation is not properly sequenced with relation to other operations (of same or different type).
`static ResultCode`	`OTHER`	The result code that should be used if no other result code is appropriate.
`static ResultCode`	`PROTOCOL_ERROR`	The result code that indicates that the client sent a malformed or illegal request to the server.
`static ResultCode`	`REFERRAL`	The result code that indicates that a referral was encountered.
`static ResultCode`	`SASL_BIND_IN_PROGRESS`	The result code that should be used for intermediate responses in multi-stage SASL bind operations.
`static ResultCode`	`SIZE_LIMIT_EXCEEDED`	The result code that indicates that a size limit was exceeded while attempting to process the request.
`static ResultCode`	`SORT_CONTROL_MISSING`	The result code that indicates that a search request included a VLV request control without a server-side sort control.
`static ResultCode`	`STRONG_AUTH_REQUIRED`	The result code that indicates that the requested operation could not be processed because it requires that the client has completed a strong form of authentication.
`static ResultCode`	`SUCCESS`	The result code that indicates that the operation completed successfully.
`static ResultCode`	`TIME_LIMIT_EXCEEDED`	The result code that indicates that a time limit was exceeded while attempting to process the request.
`static ResultCode`	`TOO_LATE`	The result code that indicates that a cancel request was unsuccessful because processing on the targeted operation had already reached a point at which it could not be canceled.
`static ResultCode`	`UNAVAILABLE`	The result code that indicates that either the entire server or one or more required resources were not available for use in processing the request.
`static ResultCode`	`UNAVAILABLE_CRITICAL_EXTENSION`	The result code that indicates that the requested operation failed because it included a critical extension that is unsupported or inappropriate for that request.
`static ResultCode`	`UNDEFINED`	The result code that should only be used if the actual result code has not yet been determined.
`static ResultCode`	`UNDEFINED_ATTRIBUTE_TYPE`	The result code that indicates that the requested operation failed because it referenced an attribute that is not defined in the server schema.
`static ResultCode`	`UNWILLING_TO_PERFORM`	The result code that indicates that the server is unwilling to perform the requested operation.
`static ResultCode`	`VIRTUAL_LIST_VIEW_ERROR`	The result code that indicates that the operation could not be processed because there was an error while processing the virtual list view control.

Method Summary

All Methods Static Methods Instance Methods Concrete Methods
Modifier and Type	Method	Description
`ResultCode.Enum`	`asEnum()`	Returns the enum equivalent for this result code.
`boolean`	`equals(Object obj)`
`LocalizableMessage`	`getName()`	Returns the short human-readable name of this result code.
`int`	`hashCode()`
`static ResultCode`	`internalServerErrorResultCode()`	Returns the result code that should be used when the Directory Server encounters an internal server error.
`int`	`intValue()`	Returns the integer value of this result code.
`boolean`	`isClientError()`	Returns `true` if this `ResultCode` corresponds to a client-side result code.
`boolean`	`isEqualTo(int resultCode)`	Returns `true` if the provided integer corresponds to this `ResultCode`.
`boolean`	`isExceptional()`	Indicates whether this result code represents an error result.
`boolean`	`isTransientError()`	Returns whether an exceptional result code represents a transient error.
`String`	`toString()`	Returns the string representation of this result code.
`static ResultCode`	`valueOf(int intValue)`	Returns the result code having the specified integer value as defined in RFC 4511 section 4.1.9.
`static List<ResultCode>`	`values()`	Returns an unmodifiable list containing the set of available result codes indexed on their integer value as defined in RFC 4511 section 4.1.9.

Methods inherited from class java.lang.Object
clone, finalize, getClass, notify, notifyAll, wait, wait, wait

- Field Detail
  - UNDEFINED
```
public static final ResultCode UNDEFINED
```
    The result code that should only be used if the actual result code has not yet been determined.
    Despite not being a standard result code, it is an implementation of the null object design pattern for this type.
  - SUCCESS
```
public static final ResultCode SUCCESS
```
    The result code that indicates that the operation completed successfully.
    This result code corresponds to the LDAP result code value of 0.
  - OPERATIONS_ERROR
```
public static final ResultCode OPERATIONS_ERROR
```
    The result code that indicates that the operation is not properly sequenced with relation to other operations (of same or different type).
    For example, this code is returned if the client attempts to StartTLS [RFC4346] while there are other uncompleted operations or if a TLS layer was already installed.
    This result code corresponds to the LDAP result code value of 1.
  - PROTOCOL_ERROR
```
public static final ResultCode PROTOCOL_ERROR
```
    The result code that indicates that the client sent a malformed or illegal request to the server.
    This result code corresponds to the LDAP result code value of 2.
  - TIME_LIMIT_EXCEEDED
```
public static final ResultCode TIME_LIMIT_EXCEEDED
```
    The result code that indicates that a time limit was exceeded while attempting to process the request.
    This result code corresponds to the LDAP result code value of 3.
  - SIZE_LIMIT_EXCEEDED
```
public static final ResultCode SIZE_LIMIT_EXCEEDED
```
    The result code that indicates that a size limit was exceeded while attempting to process the request.
    This result code corresponds to the LDAP result code value of 4.
  - COMPARE_FALSE
```
public static final ResultCode COMPARE_FALSE
```
    The result code that indicates that the attribute value assertion included in a compare request did not match the targeted entry.
    This result code corresponds to the LDAP result code value of 5.
  - COMPARE_TRUE
```
public static final ResultCode COMPARE_TRUE
```
    The result code that indicates that the attribute value assertion included in a compare request did match the targeted entry.
    This result code corresponds to the LDAP result code value of 6.
  - AUTH_METHOD_NOT_SUPPORTED
```
public static final ResultCode AUTH_METHOD_NOT_SUPPORTED
```
    The result code that indicates that the requested authentication attempt failed because it referenced an invalid SASL mechanism.
    This result code corresponds to the LDAP result code value of 7.
  - STRONG_AUTH_REQUIRED
```
public static final ResultCode STRONG_AUTH_REQUIRED
```
    The result code that indicates that the requested operation could not be processed because it requires that the client has completed a strong form of authentication.
    This result code corresponds to the LDAP result code value of 8.
  - REFERRAL
```
public static final ResultCode REFERRAL
```
    The result code that indicates that a referral was encountered.
    Strictly speaking this result code should not be exceptional since it is considered as a "success" response. However, referrals should occur rarely in practice and, when they do occur, should not be ignored since the application may believe that a request has succeeded when, in fact, nothing was done.
    This result code corresponds to the LDAP result code value of 10.
  - ADMIN_LIMIT_EXCEEDED
```
public static final ResultCode ADMIN_LIMIT_EXCEEDED
```
    The result code that indicates that processing on the requested operation could not continue because an administrative limit was exceeded.
    This result code corresponds to the LDAP result code value of 11.
  - UNAVAILABLE_CRITICAL_EXTENSION
```
public static final ResultCode UNAVAILABLE_CRITICAL_EXTENSION
```
    The result code that indicates that the requested operation failed because it included a critical extension that is unsupported or inappropriate for that request.
    This result code corresponds to the LDAP result code value of 12.
  - CONFIDENTIALITY_REQUIRED
```
public static final ResultCode CONFIDENTIALITY_REQUIRED
```
    The result code that indicates that the requested operation could not be processed because it requires confidentiality for the communication between the client and the server.
    This result code corresponds to the LDAP result code value of 13.
  - SASL_BIND_IN_PROGRESS
```
public static final ResultCode SASL_BIND_IN_PROGRESS
```
    The result code that should be used for intermediate responses in multi-stage SASL bind operations.
    This result code corresponds to the LDAP result code value of 14.
  - NO_SUCH_ATTRIBUTE
```
public static final ResultCode NO_SUCH_ATTRIBUTE
```
    The result code that indicates that the requested operation failed because it targeted an attribute or attribute value that did not exist in the specified entry.
    This result code corresponds to the LDAP result code value of 16.
  - UNDEFINED_ATTRIBUTE_TYPE
```
public static final ResultCode UNDEFINED_ATTRIBUTE_TYPE
```
    The result code that indicates that the requested operation failed because it referenced an attribute that is not defined in the server schema.
    This result code corresponds to the LDAP result code value of 17.
  - INAPPROPRIATE_MATCHING
```
public static final ResultCode INAPPROPRIATE_MATCHING
```
    The result code that indicates that the requested operation failed because it attempted to perform an inappropriate type of matching against an attribute.
    This result code corresponds to the LDAP result code value of 18.
  - CONSTRAINT_VIOLATION
```
public static final ResultCode CONSTRAINT_VIOLATION
```
    The result code that indicates that the requested operation failed because it would have violated some constraint defined in the server.
    This result code corresponds to the LDAP result code value of 19.
  - ATTRIBUTE_OR_VALUE_EXISTS
```
public static final ResultCode ATTRIBUTE_OR_VALUE_EXISTS
```
    The result code that indicates that the requested operation failed because it would have resulted in a conflict with an existing attribute or attribute value in the target entry.
    This result code corresponds to the LDAP result code value of 20.
  - INVALID_ATTRIBUTE_SYNTAX
```
public static final ResultCode INVALID_ATTRIBUTE_SYNTAX
```
    The result code that indicates that the requested operation failed because it violated the syntax for a specified attribute.
    This result code corresponds to the LDAP result code value of 21.
  - NO_SUCH_OBJECT
```
public static final ResultCode NO_SUCH_OBJECT
```
    The result code that indicates that the requested operation failed because it referenced an entry that does not exist.
    This result code corresponds to the LDAP result code value of 32.
  - ALIAS_PROBLEM
```
public static final ResultCode ALIAS_PROBLEM
```
    The result code that indicates that the requested operation failed because it attempted to perform an illegal operation on an alias.
    This result code corresponds to the LDAP result code value of 33.
  - INVALID_DN_SYNTAX
```
public static final ResultCode INVALID_DN_SYNTAX
```
    The result code that indicates that the requested operation failed because it would have resulted in an entry with an invalid or malformed DN.
    This result code corresponds to the LDAP result code value of 34.
  - ALIAS_DEREFERENCING_PROBLEM
```
public static final ResultCode ALIAS_DEREFERENCING_PROBLEM
```
    The result code that indicates that a problem was encountered while attempting to dereference an alias for a search operation.
    This result code corresponds to the LDAP result code value of 36.
  - INAPPROPRIATE_AUTHENTICATION
```
public static final ResultCode INAPPROPRIATE_AUTHENTICATION
```
    The result code that indicates that an authentication attempt failed because the requested type of authentication was not appropriate for the targeted entry.
    This result code corresponds to the LDAP result code value of 48.
  - INVALID_CREDENTIALS
```
public static final ResultCode INVALID_CREDENTIALS
```
    The result code that indicates that an authentication attempt failed because the user did not provide a valid set of credentials.
    This result code corresponds to the LDAP result code value of 49.
  - INSUFFICIENT_ACCESS_RIGHTS
```
public static final ResultCode INSUFFICIENT_ACCESS_RIGHTS
```
    The result code that indicates that the client does not have sufficient permission to perform the requested operation.
    This result code corresponds to the LDAP result code value of 50.
  - BUSY
```
public static final ResultCode BUSY
```
    The result code that indicates that the server is too busy to process the requested operation.
    This result code corresponds to the LDAP result code value of 51.
    This is a transient error which means the operation can safely be retried.
  - UNAVAILABLE
```
public static final ResultCode UNAVAILABLE
```
    The result code that indicates that either the entire server or one or more required resources were not available for use in processing the request.
    This result code corresponds to the LDAP result code value of 52.
    This is a transient error which means the operation can safely be retried.
  - UNWILLING_TO_PERFORM
```
public static final ResultCode UNWILLING_TO_PERFORM
```
    The result code that indicates that the server is unwilling to perform the requested operation.
    This result code corresponds to the LDAP result code value of 53.
  - LOOP_DETECT
```
public static final ResultCode LOOP_DETECT
```
    The result code that indicates that a referral or chaining loop was detected while processing the request.
    This result code corresponds to the LDAP result code value of 54.
  - SORT_CONTROL_MISSING
```
public static final ResultCode SORT_CONTROL_MISSING
```
    The result code that indicates that a search request included a VLV request control without a server-side sort control.
    This result code corresponds to the LDAP result code value of 60.
  - OFFSET_RANGE_ERROR
```
public static final ResultCode OFFSET_RANGE_ERROR
```
    The result code that indicates that a search request included a VLV request control with an invalid offset.
    This result code corresponds to the LDAP result code value of 61.
  - NAMING_VIOLATION
```
public static final ResultCode NAMING_VIOLATION
```
    The result code that indicates that the requested operation failed because it would have violated the server's naming configuration.
    This result code corresponds to the LDAP result code value of 64.
  - OBJECTCLASS_VIOLATION
```
public static final ResultCode OBJECTCLASS_VIOLATION
```
    The result code that indicates that the requested operation failed because it would have resulted in an entry that violated the server schema.
    This result code corresponds to the LDAP result code value of 65.
  - NOT_ALLOWED_ON_NONLEAF
```
public static final ResultCode NOT_ALLOWED_ON_NONLEAF
```
    The result code that indicates that the requested operation is not allowed for non-leaf entries.
    This result code corresponds to the LDAP result code value of 66.
  - NOT_ALLOWED_ON_RDN
```
public static final ResultCode NOT_ALLOWED_ON_RDN
```
    The result code that indicates that the requested operation is not allowed on an RDN attribute.
    This result code corresponds to the LDAP result code value of 67.
  - ENTRY_ALREADY_EXISTS
```
public static final ResultCode ENTRY_ALREADY_EXISTS
```
    The result code that indicates that the requested operation failed because it would have resulted in an entry that conflicts with an entry that already exists.
    This result code corresponds to the LDAP result code value of 68.
  - OBJECTCLASS_MODS_PROHIBITED
```
public static final ResultCode OBJECTCLASS_MODS_PROHIBITED
```
    The result code that indicates that the operation could not be processed because it would have modified the objectclasses associated with an entry in an illegal manner.
    This result code corresponds to the LDAP result code value of 69.
  - AFFECTS_MULTIPLE_DSAS
```
public static final ResultCode AFFECTS_MULTIPLE_DSAS
```
    The result code that indicates that the operation could not be processed because it would impact multiple DSAs or other repositories.
    This result code corresponds to the LDAP result code value of 71.
  - VIRTUAL_LIST_VIEW_ERROR
```
public static final ResultCode VIRTUAL_LIST_VIEW_ERROR
```
    The result code that indicates that the operation could not be processed because there was an error while processing the virtual list view control.
    This result code corresponds to the LDAP result code value of 76.
  - OTHER
```
public static final ResultCode OTHER
```
    The result code that should be used if no other result code is appropriate.
    This result code corresponds to the LDAP result code value of 80.
  - CLIENT_SIDE_SERVER_DOWN
```
public static final ResultCode CLIENT_SIDE_SERVER_DOWN
```
    The client-side result code that indicates that the server is down. This is for client-side use only and should never be transferred over protocol.
    This result code corresponds to the LDAP result code value of 81.
    This is a transient error which means the operation can be retried.
  - CLIENT_SIDE_LOCAL_ERROR
```
public static final ResultCode CLIENT_SIDE_LOCAL_ERROR
```
    The client-side result code that indicates that a local error occurred that had nothing to do with interaction with the server. This is for client-side use only and should never be transferred over protocol.
    This result code corresponds to the LDAP result code value of 82.
  - CLIENT_SIDE_ENCODING_ERROR
```
public static final ResultCode CLIENT_SIDE_ENCODING_ERROR
```
    The client-side result code that indicates that an error occurred while encoding a request to send to the server. This is for client-side use only and should never be transferred over protocol.
    This result code corresponds to the LDAP result code value of 83.
  - CLIENT_SIDE_DECODING_ERROR
```
public static final ResultCode CLIENT_SIDE_DECODING_ERROR
```
    The client-side result code that indicates that an error occurred while decoding a response from the server. This is for client-side use only and should never be transferred over protocol.
    This result code corresponds to the LDAP result code value of 84.
  - CLIENT_SIDE_TIMEOUT
```
public static final ResultCode CLIENT_SIDE_TIMEOUT
```
    The client-side result code that indicates that the client did not receive an expected response in a timely manner. This is for client-side use only and should never be transferred over protocol.
    This result code corresponds to the LDAP result code value of 85.
    This is a transient error which means the operation can be retried.
  - CLIENT_SIDE_AUTH_UNKNOWN
```
public static final ResultCode CLIENT_SIDE_AUTH_UNKNOWN
```
    The client-side result code that indicates that the user requested an unknown or unsupported authentication mechanism. This is for client-side use only and should never be transferred over protocol.
    This result code corresponds to the LDAP result code value of 86.
  - CLIENT_SIDE_FILTER_ERROR
```
public static final ResultCode CLIENT_SIDE_FILTER_ERROR
```
    The client-side result code that indicates that the filter provided by the user was malformed and could not be parsed. This is for client-side use only and should never be transferred over protocol.
    This result code corresponds to the LDAP result code value of 87.
  - CLIENT_SIDE_USER_CANCELLED
```
public static final ResultCode CLIENT_SIDE_USER_CANCELLED
```
    The client-side result code that indicates that the user cancelled an operation. This is for client-side use only and should never be transferred over protocol.
    This result code corresponds to the LDAP result code value of 88.
  - CLIENT_SIDE_PARAM_ERROR
```
public static final ResultCode CLIENT_SIDE_PARAM_ERROR
```
    The client-side result code that indicates that there was a problem with one or more of the parameters provided by the user. This is for client-side use only and should never be transferred over protocol.
    This result code corresponds to the LDAP result code value of 89.
  - CLIENT_SIDE_NO_MEMORY
```
public static final ResultCode CLIENT_SIDE_NO_MEMORY
```
    The client-side result code that indicates that the client application was not able to allocate enough memory for the requested operation. This is for client-side use only and should never be transferred over protocol.
    This result code corresponds to the LDAP result code value of 90.
  - CLIENT_SIDE_CONNECT_ERROR
```
public static final ResultCode CLIENT_SIDE_CONNECT_ERROR
```
    The client-side result code that indicates that the client was not able to establish a connection to the server. This is for client-side use only and should never be transferred over protocol.
    This result code corresponds to the LDAP result code value of 91.
    This is a transient error which means the operation can be retried.
  - CLIENT_SIDE_NOT_SUPPORTED
```
public static final ResultCode CLIENT_SIDE_NOT_SUPPORTED
```
    The client-side result code that indicates that the user requested an operation that is not supported. This is for client-side use only and should never be transferred over protocol.
    This result code corresponds to the LDAP result code value of 92.
  - CLIENT_SIDE_CONTROL_NOT_FOUND
```
public static final ResultCode CLIENT_SIDE_CONTROL_NOT_FOUND
```
    The client-side result code that indicates that the client expected a control to be present in the response from the server but it was not included. This is for client-side use only and should never be transferred over protocol.
    This result code corresponds to the LDAP result code value of 93.
  - CLIENT_SIDE_NO_RESULTS_RETURNED
```
public static final ResultCode CLIENT_SIDE_NO_RESULTS_RETURNED
```
    The client-side result code that indicates that the requested single entry search operation or read operation failed because the Directory Server did not return any matching entries. This is for client-side use only and should never be transferred over protocol.
    This result code corresponds to the LDAP result code value of 94.
  - CLIENT_SIDE_UNEXPECTED_RESULTS_RETURNED
```
public static final ResultCode CLIENT_SIDE_UNEXPECTED_RESULTS_RETURNED
```
    The client-side result code that the requested single entry search operation or read operation failed because the Directory Server returned multiple matching entries (or search references) when only a single matching entry was expected. This is for client-side use only and should never be transferred over protocol.
    This result code corresponds to the LDAP result code value of 95.
  - CLIENT_SIDE_CLIENT_LOOP
```
public static final ResultCode CLIENT_SIDE_CLIENT_LOOP
```
    The client-side result code that indicates that the client detected a referral loop caused by servers referencing each other in a circular manner. This is for client-side use only and should never be transferred over protocol.
    This result code corresponds to the LDAP result code value of 96.
  - CLIENT_SIDE_REFERRAL_LIMIT_EXCEEDED
```
public static final ResultCode CLIENT_SIDE_REFERRAL_LIMIT_EXCEEDED
```
    The client-side result code that indicates that the client reached the maximum number of hops allowed when attempting to follow a referral (i.e., following one referral resulted in another referral which resulted in another referral and so on). This is for client-side use only and should never be transferred over protocol.
    This result code corresponds to the LDAP result code value of 97.
  - CANCELLED
```
public static final ResultCode CANCELLED
```
    The result code that indicates that a request has been cancelled by a cancel request.
    This result code corresponds to the LDAP result code value of 118.
  - NO_SUCH_OPERATION
```
public static final ResultCode NO_SUCH_OPERATION
```
    The result code that indicates that a cancel request was unsuccessful because the targeted operation did not exist or had already completed.
    This result code corresponds to the LDAP result code value of 119.
  - TOO_LATE
```
public static final ResultCode TOO_LATE
```
    The result code that indicates that a cancel request was unsuccessful because processing on the targeted operation had already reached a point at which it could not be canceled.
    This result code corresponds to the LDAP result code value of 120.
  - CANNOT_CANCEL
```
public static final ResultCode CANNOT_CANCEL
```
    The result code that indicates that a cancel request was unsuccessful because the targeted operation was one that could not be canceled.
    This result code corresponds to the LDAP result code value of 121.
  - ASSERTION_FAILED
```
public static final ResultCode ASSERTION_FAILED
```
    The result code that indicates that the filter contained in an assertion control failed to match the target entry.
    This result code corresponds to the LDAP result code value of 122.
  - AUTHORIZATION_DENIED
```
public static final ResultCode AUTHORIZATION_DENIED
```
    The result code that should be used if the server will not allow the client to use the requested authorization.
    This result code corresponds to the LDAP result code value of 123.
  - NO_OPERATION
```
public static final ResultCode NO_OPERATION
```
    The result code that should be used if the server did not actually complete processing on the associated operation because the request included the LDAP No-Op control.
    This result code corresponds to the LDAP result code value of 16654.
- Method Detail
  - valueOf
```
public static ResultCode valueOf(int intValue)
```
    Returns the result code having the specified integer value as defined in RFC 4511 section 4.1.9. If there is no result code associated with the specified integer value then a temporary result code is automatically created in order to handle cases where unexpected result codes are returned from the server.
    
    Parameters:
    
    intValue - The integer value of the result code.
    
    Returns:
    
    The result code.
  - values
```
public static List<ResultCode> values()
```
    Returns an unmodifiable list containing the set of available result codes indexed on their integer value as defined in RFC 4511 section 4.1.9.
    
    Returns:
    
    An unmodifiable list containing the set of available result codes.
  - equals
```
public boolean equals(Object obj)
```
    Overrides:
    
    equals in class Object
  - getName
```
public LocalizableMessage getName()
```
    Returns the short human-readable name of this result code.
    
    Returns:
    
    The short human-readable name of this result code.
  - hashCode
```
public int hashCode()
```
    Overrides:
    
    hashCode in class Object
  - intValue
```
public int intValue()
```
    Returns the integer value of this result code.
    
    Returns:
    
    The integer value of this result code.
  - asEnum
```
public ResultCode.Enum asEnum()
```
    Returns the enum equivalent for this result code.
    
    Returns:
    
    The enum equivalent for this result code when a known mapping exists, or ResultCode.Enum.UNKNOWN if this is an unknown result code.
  - isExceptional
```
public boolean isExceptional()
```
    Indicates whether this result code represents an error result.
    The following result codes are NOT interpreted as error results:
    
    SUCCESS
    COMPARE_FALSE
    COMPARE_TRUE
    SASL_BIND_IN_PROGRESS
    NO_OPERATION
    In order to make it easier for application to detect referrals, the REFERRAL result code is interpreted as an error result (the LDAP RFCs treat referrals as a success response).
    Returns:
    
    true if this result code represents an error result, otherwise false.
  - isTransientError
```
public boolean isTransientError()
```
    Returns whether an exceptional result code represents a transient error. Returns false for successful result codes.
    
    Returns:
    
    true if exceptional result code represents a transient error, false in all other cases
  - isClientError
```
public boolean isClientError()
```
    Returns true if this ResultCode corresponds to a client-side result code. See draft-ietf-ldapext-ldap-c-api-05.txt
    
    Returns:
    
    true if result code represents a client side error, false in all other cases
  - internalServerErrorResultCode
```
public static ResultCode internalServerErrorResultCode()
```
    Returns the result code that should be used when the Directory Server encounters an internal server error.
    
    Returns:
    
    The result code that should be used when the Directory Server encounters an internal server error.
  - toString
```
public String toString()
```
    Returns the string representation of this result code.
    
    Overrides:
    
    toString in class Object
    
    Returns:
    
    The string representation of this result code.
  - isEqualTo
```
public boolean isEqualTo(int resultCode)
```
    Returns true if the provided integer corresponds to this ResultCode.
    
    Parameters:
    
    resultCode - The integer to compare
    
    Returns:
    
    true if the provided integer corresponds to this ResultCode.

Class ResultCode

Nested Class Summary

Field Summary

Method Summary

Methods inherited from class java.lang.Object

Field Detail

UNDEFINED

SUCCESS

OPERATIONS_ERROR

PROTOCOL_ERROR

TIME_LIMIT_EXCEEDED

SIZE_LIMIT_EXCEEDED

COMPARE_FALSE

COMPARE_TRUE

AUTH_METHOD_NOT_SUPPORTED

STRONG_AUTH_REQUIRED

REFERRAL

ADMIN_LIMIT_EXCEEDED

UNAVAILABLE_CRITICAL_EXTENSION

CONFIDENTIALITY_REQUIRED

SASL_BIND_IN_PROGRESS

NO_SUCH_ATTRIBUTE

UNDEFINED_ATTRIBUTE_TYPE

INAPPROPRIATE_MATCHING

CONSTRAINT_VIOLATION

ATTRIBUTE_OR_VALUE_EXISTS

INVALID_ATTRIBUTE_SYNTAX

NO_SUCH_OBJECT

ALIAS_PROBLEM

INVALID_DN_SYNTAX

ALIAS_DEREFERENCING_PROBLEM

INAPPROPRIATE_AUTHENTICATION

INVALID_CREDENTIALS

INSUFFICIENT_ACCESS_RIGHTS

BUSY

UNAVAILABLE

UNWILLING_TO_PERFORM

LOOP_DETECT

SORT_CONTROL_MISSING

OFFSET_RANGE_ERROR

NAMING_VIOLATION

OBJECTCLASS_VIOLATION

NOT_ALLOWED_ON_NONLEAF

NOT_ALLOWED_ON_RDN

ENTRY_ALREADY_EXISTS

OBJECTCLASS_MODS_PROHIBITED

AFFECTS_MULTIPLE_DSAS

VIRTUAL_LIST_VIEW_ERROR

OTHER

CLIENT_SIDE_SERVER_DOWN

CLIENT_SIDE_LOCAL_ERROR

CLIENT_SIDE_ENCODING_ERROR

CLIENT_SIDE_DECODING_ERROR

CLIENT_SIDE_TIMEOUT

CLIENT_SIDE_AUTH_UNKNOWN

CLIENT_SIDE_FILTER_ERROR

CLIENT_SIDE_USER_CANCELLED

CLIENT_SIDE_PARAM_ERROR

CLIENT_SIDE_NO_MEMORY

CLIENT_SIDE_CONNECT_ERROR

CLIENT_SIDE_NOT_SUPPORTED

CLIENT_SIDE_CONTROL_NOT_FOUND

CLIENT_SIDE_NO_RESULTS_RETURNED

CLIENT_SIDE_UNEXPECTED_RESULTS_RETURNED

CLIENT_SIDE_CLIENT_LOOP

CLIENT_SIDE_REFERRAL_LIMIT_EXCEEDED

CANCELLED

NO_SUCH_OPERATION

TOO_LATE

CANNOT_CANCEL

ASSERTION_FAILED

AUTHORIZATION_DENIED

NO_OPERATION

Method Detail

valueOf

values

equals

getName

hashCode

intValue