PingGateway 2024.6

PingOne Protect integration

Use PingOne Protect risk evaluations with web applications protected by PingGateway. PingGateway routes requests based on the level of risk PingOne Protect associates with them.

This capability is available in Technology preview. It isn’t yet supported, may be functionally incomplete, and is subject to change without notice.

Risk management

PingOne Protect monitors end-user requests and generates a risk score of low, medium, or high based on the user’s activity and device context. You configure and fine-tune risk policies and train risk models prior to using PingGateway with PingOne Protect. For details, refer to Threat Protection using PingOne Protect.

You configure PingGateway routes to react to risk scores from PingOne Protect dynamically. For example, if the risk score is medium, PingGateway can direct the user to complete additional verification. If the risk score is high, PingGateway can deny access to the resource instead.

The following sequence diagram shows the PingGateway configuration objects involved in a risk management flow:

risk
  1. The initial request enters a Chain configured for risk evaluation with PingOne Protect.

  2. The PingOneProtectEvaluationFilter includes data about the request in an API call to PingOne Protect.

  3. PingOne Protect provides a risk evaluation response.

  4. The PingOneProtectEvaluationFilter populates the PingOneProtectEvaluationContext with the risk level based on the evaluation response and passes control to the PingOneProtectThreatLevelRoutingHandler.

  5. -10. The PingOneProtectThreatLevelRoutingHandler dispatches the request based on the risk level. The downstream handler returns a response to the initial request that is appropriate for the risk level. The downstream handlers can prompt additional actions to verify the user’s identity.

Although not shown in the sequence diagram, when a MEDIUM risk level leads to additional authentication steps, a PingOneProtectFeedbackFilter included in the process records the outcome.

PingGateway runs at the outer edge of your systems, the place where all inbound traffic first arrives and all outbound traffic leaves, just inside the network infrastructure.

PingGateway is well-placed to capture signals about the traffic and its risk profile.

Example: protect against session degradation

Session degradation arises when a valid user session gets used in unexpected ways, increasing the risk the session has been hijacked or otherwise compromised. Session degradation is why we can’t let users stay signed in forever unless we can authenticate them again.

Together, PingGateway and PingOne Protect help you automate fine-grained risk evaluation, avoiding the distraction of additional authentication steps unless they’re required for a risky request. Users stay signed in with their current session, which they experience as a keep me signed in feature. You nevertheless protect their assets from hijacking without needing constantly to verify their identity.

This example demonstrates risk management where the principal already has a valid session. The example does not demonstrate how to configure PingOne Protect.

When PingOne Protect returns a risk evaluation, PingGateway responds based on the risk level. This example demonstrates the following responses:

High risk

Deny access to the requested resource.

Although not shown in this brief example, you could route the request to a honeypot.

Medium risk

Prompt the user to re-authenticate to verify their identity.

The user can perform step up or transactional authentication at this point.

Low risk

Let the request pass through unchanged.

Before you start

Configure PingGateway

What follows extends the CDSSO route to protect against session degradation:

  1. Sign on to the PingOne environment with PingOne Protect as an administrator and add an application for PingGateway.

    Use the following hints regarding non-default configuration settings:

    Setting Value

    Application Name

    PingGateway

    Application Type

    Worker

    Application profile > Roles

    Environment Admin
    Identity Data Admin

  2. In the PingOne environment, find and record the values of the following settings:

    Property Description

    Environment UUID

    This is <env-uuid> in other property examples.

    Evaluation endpoint

    For risk evaluation requests.

    Example: https://api.pingone.eu/v1/environments/<env-uuid>/riskEvaluations

    PingGateway client ID

    PingGateway credentials to access PingOne as the application you registered.

    PingGateway client secret

    Policy set UUID

    The PingOne Protect policy for risk evaluation requests.

    Token endpoint

    For PingGateway to get an access token.

    Example: https://auth.pingone.eu/<env-uuid>/as/token

  3. Set an environment variable for the PingGateway client secret.

    PingGateway uses a SystemAndEnvSecretStore to retrieve the client secret, so you must base64-encode the value you found in the PingOne application profile:

    $ export CLIENT_SECRET_ID='<base-64-encoded-client-secret>'
  4. Restart PingGateway to load the environment variable.

  5. Update the CDSSO route to add risk management:

    {
      "name": "risk",
      "baseURI": "http://app.example.com:8081",
      "condition": "${find(request.uri.path, '^/home/cdsso')}",
      "properties": {
        "amInstanceUrl": "https://myTenant.forgeblocks.com/am",
        "clientId": "my-application-client-id",
        "evaluationEndpoint": "https://api.pingone.eu/v1/environments/my-environment-id/riskEvaluations",
        "policySetId": "my-policy-set-id",
        "tokenEndpoint": "https://auth.pingone.eu/my-environment-id/as/token"
      },
      "heap": [
        {
          "name": "SystemAndEnvSecretStore-1",
          "type": "SystemAndEnvSecretStore"
        },
        {
          "name": "AmService-1",
          "type": "AmService",
          "config": {
            "url": "&{amInstanceUrl}",
            "realm": "/alpha",
            "agent": {
              "username": "ig_agent",
              "passwordSecretId": "agent.secret.id"
            },
            "secretsProvider": "SystemAndEnvSecretStore-1",
            "sessionCache": {
              "enabled": false
            }
          }
        },
        {
          "name": "ClientCredentialsOAuth2ClientFilter-1",
          "type": "ClientCredentialsOAuth2ClientFilter",
          "config": {
            "tokenEndpoint": "&{tokenEndpoint}",
            "scopes": [
              "openid",
              "profile"
            ],
            "endpointHandler": {
              "name": "AccessTokenHandler",
              "type": "Chain",
              "config": {
                "filters": [
                  {
                    "type": "ClientSecretBasicAuthenticationFilter",
                    "config": {
                      "clientId": "&{clientId}",
                      "clientSecretId": "client.secret.id",
                      "secretsProvider": "SystemAndEnvSecretStore-1"
                    }
                  }
                ],
                "handler": "ForgeRockClientHandler"
              }
            }
          }
        },
        {
          "name": "EvaluationEndpointHandler",
          "type": "Chain",
          "config": {
            "filters": [
              "ClientCredentialsOAuth2ClientFilter-1"
            ],
            "handler": "ForgeRockClientHandler"
          }
        },
        {
          "name": "FailureHandler",
          "type": "StaticResponseHandler",
          "config": {
            "status": 403,
            "headers": {
              "Content-Type": [
                "text/plain; charset=UTF-8"
              ]
            },
            "entity": "HTTP 403 Forbidden"
          }
        },
        {
          "name": "StepUpHandler",
          "type": "Chain",
          "config": {
            "filters": [
              {
                "name": "PolicyEnforcementFilter-1",
                "type": "PolicyEnforcementFilter",
                "config": {
                  "application": "PEP-CDSSO",
                  "ssoTokenSubject": "${contexts.cdsso.token}",
                  "amService": "AmService-1"
                }
              }
            ],
            "handler": "ReverseProxyHandler"
          }
        }
      ],
      "handler": {
        "type": "Chain",
        "config": {
          "filters": [
            {
              "name": "CrossDomainSingleSignOnFilter-1",
              "type": "CrossDomainSingleSignOnFilter",
              "config": {
                "redirectEndpoint": "/home/cdsso/redirect",
                "authCookie": {
                  "path": "/home",
                  "name": "ig-token-cookie"
                },
                "amService": "AmService-1"
              }
            },
            {
              "name": "PingOneProtectEvaluationFilter-1",
              "type": "PingOneProtectEvaluationFilter",
              "config": {
                "evaluationEndpoint": "&{evaluationEndpoint}",
                "endpointHandler": "EvaluationEndpointHandler",
                "policySet": "&{policySetId}",
                "userId": "${contexts.cdsso.claimsSet.getClaim('subname')}",
                "nonEvaluatedUrls" : "${find(request.uri.path, '/home/cdsso/redirect')}"
              }
            }
          ],
          "handler": {
            "name": "PingOneProtectThreatLevelRoutingHandler-1",
            "type": "PingOneProtectThreatLevelRoutingHandler",
            "config": {
              "levels": [
                {
                  "level": "LOW",
                  "handler": "ReverseProxyHandler"
                },
                {
                  "level": "MEDIUM",
                  "handler": "StepUpHandler"
                },
                {
                  "level": "HIGH",
                  "handler": "FailureHandler"
                }
              ],
              "fallbackHandler": "FailureHandler"
            }
          }
        }
      }
    }

    Notice the following features of the updated route:

    • The route properties use the settings you collected from the PingOne environment.

      Replace the placeholders in the route properties with the settings you collected.

    • The heap has an evaluation endpoint handler to get an access token for risk evaluation requests.

    • The PingOneProtectEvaluationFilter uses the evaluation endpoint handler to make the risk evaluation request and populate the PingOneProtectEvaluationContext (implicit in the configuration).

    • The PingOneProtectThreatLevelRoutingHandler uses the context to route the request based on the risk level:

      • Low-risk requests pass through unchanged.

      • Medium-risk requests use step up authorization for the request.

      • High-risk requests and requests where the PingOneProtectEvaluationFilter failed to update the context get denied.

Verify the route

  1. In your browser’s privacy or incognito mode, go to https://ig.ext.com:8443/home/cdsso.

    PingOne Advanced Identity Cloud displays the login page.

  2. Log in to PingOne Advanced Identity Cloud as user demo, password Ch4ng3!t.

    After authentication, PingGateway gets an access token and uses it to make a risk evaluation request. The PingOneProtectThreatLevelRoutingHandler routes the result:

    • Low-risk requests go directly to the sample app.

    • Medium-risk requests prompt the user for the authorization passcode 7890.

    • PingGateway denies access to other requests.

You’ve successfully demonstrated risk management to prevent session degradation. Adapt the route to the specifics of your use case.