Required configuration

AdminHttpApplication (`admin.json`)

The AdminHttpApplication serves requests on the administrative route, such as the creation of routes and the collection of monitoring information. The administrative route and its subroutes are reserved for administration endpoints.

The configuration is loaded from a JSON-encoded file, expected at $HOME/.openig/config/admin.json. Objects configured in admin.json cannot be used by config.json or any PingGateway routes.

Default objects

PingGateway provides default objects in admin.json. To override a default object, configure an object with the same name in admin.json.

Configure default objects in admin.json and config.json separately. An object configured in admin.json with the same name as an object configured in config.json isn’t the same object.

AuditService

Records no audit events. The default AuditService is NoOpAuditService. Learn more from NoOpAuditService.

CaptureDecorator

Captures requests and response messages. The default CaptureDecorator is named capture, and uses the default settings given in CaptureDecorator.

When a capture point for the default CaptureDecorator is defined in a route, for example, when "capture: "all" is set as a top-level attribute of the JSON, log messages for requests and responses passing through the route are written to a log file in $HOME/.openig/logs.

When no capture point is defined in a route, only exceptions thrown during request or response processing are logged.

By default, request and response contexts and entities are not captured. Do one of the following to capture information:

Override the default capture decorator declaration, and set captureEntity to true.
Declare another CaptureDecorator object with an appropriate configuration and use it at your capture points.

The capture decorator logs information about the HTTP request and response messages, along with their respective headers.

ClientHandler

Communicates with third-party services. Learn more from ClientHandler.

ForgeRockClientHandler

Sends Common Audit transaction IDs when communicating with protected applications. The default ForgeRockClientHandler is a Chain, composed of a TransactionIdOutboundFilter and a ClientHandler.

IssuerRepository

A repository of Issuers declared in the heap. To overwrite the default issuer, configure a local IssuerRepository with the name IssuerRepository. To create a new IssuerRepository containing a subset of Issuers, configure a local IssuerRepository with a different name.

ProxyOptions

A proxy to which a ClientHandler or ReverseProxyHandler can submit requests, and an AmService can submit Websocket notifications. For more information, refer to ProxyOptions.

ReverseProxyHandler

Communicates with third-party services. For more information, refer to ReverseProxyHandler.

ScheduledExecutorService

Specifies the number of threads in a pool.

SecretsService (deprecated)

Manages a store of secrets from files, system properties, and environment variables, by using Commons Secrets API. The default SecretsService is a SystemAndEnvSecretStore with the default configuration. For more information, refer to Secrets.

TemporaryStorage

Manages temporary buffers. For more information, refer to TemporaryStorage.

TimerDecorator

Records time spent within filters and handlers. The default TimerDecorator is named timer. For more information, refer to TimerDecorator.

TransactionIdOutboundFilter

Inserts the ID of a transaction into the header of a request.

Provided objects

PingGateway creates the following objects when a filter with the name of the object is declared in admin.json:

"ApiProtectionFilter": A filter to protect administrative APIs on reserved routes. By default, only the loopback address can access reserved routes.

For an example that uses an ApiProtectionFilter, refer to Set up the UMA example. For information about reserved routes, refer to Reserved routes.
"MetricsProtectionFilter": A filter to protect the monitoring endpoints.

By default, the Prometheus Scrape Endpoint and Common REST Monitoring Endpoint (deprecated) are open and accessible; no special credentials or privileges are required to access the monitoring endpoints.

For an example that uses a MetricsProtectionFilter, refer to Protect monitoring endpoints.
"StudioProtectionFilter": A filter to protect the Studio endpoint when PingGateway is running in development mode.

When PingGateway is running in development mode, by default the Studio endpoint is open and accessible.

For an example that uses a StudioProtectionFilter, refer to Restrict access to Studio.

Usage

{
  "heap": [ object, ... ],
  "connectors": [ object, ... ],
  "vertx": object,
  "gatewayUnits": configuration expression<number>,
  "mode": configuration expression<enumeration>,
  "prefix": configuration expression<string>,
  "properties": object,
  "temporaryDirectory": configuration expression<string>,
  "temporaryStorage": TemporaryStorage reference,
  "pidFileMode": configuration expression<enumeration>,
  "preserveOriginalQueryString": configuration expression<boolean>,
  "session": object,
  "streamingEnabled": configuration expression<boolean>,
  "serveDeprecatedPrometheusEndpoint": configuration expression<boolean>
}

Properties

"heap": array of objects, optional

The heap object configuration, described in Heap objects.

"connectors": array of objects, required

Server port configuration, when PingGateway is acting server-side.

When an application sends requests to PingGateway or requests services from PingGateway, PingGateway is server-side. PingGateway is acting as a server of the application, and the application is acting as a client.

{
  "connectors" : [
    {
      "port": [ configuration expression<number>, ... ],
      "tls": ServerTlsOptions reference,
      "vertx": object,
      "maxTotalHeadersSize": configuration expression<integer>
    },
    {
      ...
    }
  ]
}

port: array of configuration expression<numbers>, required

One or more ports on which PingGateway is connected. When more than one port is defined, PingGateway is connected to each port.

tls: ServerTlsOptions reference, optional

Configure options for connections to TLS-protected endpoints, based on ServerTlsOptions. Define the object inline or in the heap.

Default: Connections to TLS-protected endpoints are not configured.

vertx: object, optional

Vert.x-specific configuration for this connector when PingGateway is acting server-side. When PingGateway is acting client-side, configure the vertx property of ClientHandler or ReverseProxyHandler.

Vert.x options are described in HttpServerOptions.

For properties where PingGateway provides its own first-class configuration, Vert.x configuration options are disallowed, and the PingGateway configuration option takes precedence over Vert.x options configured in vertx. Vert.x values are evaluated as configuration expressions.

The following Vert.x configuration options are disallowed server-side:

port
useAlpn
ssl
enabledCipherSuites
enabledSecureTransportProtocols
jdkSslEngineOptions
keyStoreOptions
openSslEngineOptions
pemKeyCertOptions
pemTrustOptions
pfxKeyCertOptions
pfxTrustOptions
trustStoreOptions
clientAuth

The following Vert.x configuration options are deprecated server-side:

maxHeaderSize
initialSettings:maxHeaderListSize

Use connectors:maxTotalHeadersSize instead of vertx.maxHeaderSize or vertx.initialSettings.maxHeaderListSize.

The following example configures connectors on ports 8080 and 8443 when PingGateway is acting server-side. When PingGateway is acting client-side, configure the vertx property of ClientHandler or ReverseProxyHandler:

{
  "connectors": [{
    "port": 8080,
    "vertx": {
      "maxWebSocketFrameSize": 128000,
      "maxWebSocketMessageSize": 256000,
      "compressionLevel": 4
    }
  },
  {
    "port": 8443,
    "tls": "ServerTlsOptions-1"
  }]
}

maxTotalHeadersSize: integer, optional

The maximum size in bytes of the sum of all request headers. When the request headers exceed this limit, PingGateway returns an HTTP 431 error.

Default: 8 192 bytes

The following example configures HTTP/2 connections on port 7070 when PingGateway is acting server-side. The configuration allows PingGateway to accept HTTP/2 requests with large headers. When PingGateway is acting client-side, configure the vertx property of ClientHandler or ReverseProxyHandler:

{
  "connectors": [
    {
      "port": 7070,
      "maxTotalHeadersSize": 16384
    }
  ]
}

vertx: object, optional

Vert.x-specific configuration used to more finely-tune Vert.x instances. Vert.x values are evaluated as configuration expressions.

Use the Vert.x options described in VertxOptions, with the following exceptions:

metricsOptions: Not used
metricsEnabled: Enable Vertx metrics. Default: true.

For an example, refer to Monitoring Services.

PingGateway proxies all WebSocket subprotocols by default. To proxy specific WebSocket subprotocols only, list them as follows:

"vertx": {
  "webSocketSubProtocols": ["v1.notifications.forgerock.org", ... ]
}

"gatewayUnits": configuration expression<number>, optional

The number of parallel instances of PingGateway to bind to an event loop. All instances listen on the same ports.

Default: The number of cores available to the JVM.

mode: configuration expression<enumeration>, optional

Set the PingGateway mode to development or production. The value is not case-sensitive.

If mode is not set, the provided configuration token ig.run.mode can be resolved at startup to define the run mode.

For more information, refer to Operating modes.

Default: production

"prefix": configuration expression<string>, optional

The base of the route for administration requests. This route and its subroutes are reserved for administration endpoints.

Default: openig

"properties": object, optional

Configuration parameters declared as property variables for use in the configuration. See also Route properties.

Default: Null

"temporaryDirectory": configuration expression<string>, optional

Directory containing temporary storage files.

Set this property to store temporary files in a different directory, for example:

{
   "temporaryDirectory": "/path/to/my-temporary-directory"
}

Default: $HOME/.openig/tmp (on Windows, %appdata%\OpenIG\OpenIG\tmp)

"temporaryStorage": TemporaryStorage reference, optional

The TemporaryStorage object to buffer content during processing.

Provide the name of a TemporaryStorage object defined in the heap or an inline TemporaryStorage configuration object.

Incoming requests use the temporary storage buffer as follows:

Used only when streamingEnabled is false.
The request is loaded into the PingGateway storage defined in temporaryStorage, before it enters the chain.
If the content length of the request is more than the buffer limit, PingGateway returns an HTTP 413 Payload Too Large.

Default: Use the heap object named TemporaryStorage. Otherwise, use an internally-created TemporaryStorage object named TemporaryStorage that uses default settings for a TemporaryStorage object.

"pidFileMode": configuration expression<enumeration>, optional

Mode to allow or disallow startup if there is an existing PID file. Use one of the following values:

fail: Startup fails if there is an existing PID file.
override: Startup is allowed if there is an existing PID file. PingGateway removes the existing PID file and creates a new one during startup.

Default: fail

"preserveOriginalQueryString": configuration expression<boolean>, optional

Process query strings in URLs, by applying or not applying a decode/encode process to the whole query string.

The following characters are disallowed in query string URL components: ", {, }, <, >, (space), and |. For more information about which query strings characters require encoding, refer to Uniform Resource Identifier (URI): Generic Syntax.

true: Preserve query strings as they are presented.

Select this option if the query string must not change during processing, for example, in signature verification.

If a query string contains a disallowed character, the request produces a 400 Bad Request.
false: Tolerate disallowed characters in query string URL components, by applying a decode/encode process to the whole query string.

Select this option when a user agent or client produces query searches with disallowed characters. PingGateway transparently encodes the disallowed characters before forwarding requests to the protected application.

Characters in query strings are transformed as follows:
- Allowed characters are not changed. For example, sep=a is not changed.
- Percent-encoded values are re-encoded when the decoded value is an allowed character. For example, sep=%27 is changed to sep=', because ' is an allowed character.
- Percent-encoded values are not changed when the decoded value is a disallowed character. For example, sep=%22 is not changed, because " is a disallowed character.
- Disallowed characters are encoded. For example, sep=", is changed to sep=%22, because " is a disallowed character.

Default: false

"session": object, optional

Configures stateful sessions for PingGateway. For information about PingGateway sessions, refer to Sessions.

{
  "session": {
    "cookie": {
      "name": configuration expression<string>,
      "httpOnly": configuration expression<boolean>,
      "path": configuration expression<string>,
      "sameSite": configuration expression<enumeration>,
      "secure": configuration expression<boolean>,
    },
    "timeout": configuration expression<duration>
  }
}

"cookie": object, optional

The configuration of the cookie used to store the stateful session.

Default: The session cookie is treated as a host-based cookie.

"name": configuration expression<string>, optional

The session cookie name.

Default: IG_SESSIONID

"httpOnly": configuration expression<boolean>, optional

Flag to mitigate the risk of client-side scripts accessing protected session cookies.

Default: true

"path": configuration expression<string>, optional

The path protected by the session.

Set a path only if the user agent is able to re-emit session cookies on the path. For example, to re-emit a session cookie on the path /home/cdsso, the user agent must be able to access that path on its next hop.

Default: /.

"sameSite": configuration expression<enumeration>, optional

Options to manage the circumstance in which the session cookie is sent to the server. The following values are listed in order of strictness, with most strict first:

STRICT: Send the session cookie only if the request was initiated from the session cookie domain. Not case-sensitive. Use this value to reduce the risk of cross-site request forgery (CSRF) attacks.
LAX: Send the session cookie only with GET requests in a first-party context, where the URL in the address bar matches the session cookie domain. Not case-sensitive. Use this value to reduce the risk of cross-site request forgery (CSRF) attacks.
NONE: Send the session cookie whenever a request is made to the session cookie domain. With this setting, consider setting secure to true to prevent browsers from rejecting the session cookie. For more information, refer to SameSite cookies

Default: LAX

For CDSSO, set "sameSite":"none" and "secure":"true". For security reasons, many browsers require the connection used by the browser to be secure (HTTPS) for "sameSite":"none". Therefore, if the connection used by the browser is not secure (HTTP), the browser might not supply cookies with "sameSite":"none". For more information, refer to Authenticate with CDSSO.

"secure": configuration expression<boolean>, optional

Flag to limit the scope of the session cookie to secure channels.

Set this flag only if the user agent is able to re-emit session cookies over HTTPS on its next hop. For example, to re-emit a session cookie with the secure flag, the user agent must be connected to its next hop by HTTPS.

Default: false

"timeout": configuration expression<duration>, optional

The duration after which idle sessions are automatically timed out.

The value must be above zero, and no greater than 3650 days (approximately 10 years). PingGateway truncates the duration of longer values to 3650 days.

Default: 30 minutes

"streamingEnabled": configuration expression<boolean>, optional

A flag to manage content:

true: PingGateway streams the content of HTTP requests and responses. The content is available for processing bit-by-bit, as soon as it is received.
false: PingGateway buffers the content of HTTP requests and responses into the storage defined in temporaryStorage. The content is available for processing only after it has all been received.

When this property is true, consider the following requirements to prevent PingGateway from blocking an executing thread to wait for streamed content:

Write runtime expressions that consume streamed content with # instead of $. For more information, refer to runtime expression.
In scripts and Java extensions, never use a Promise blocking method, such as get(), getOrThrow(), or getOrThrowUninterruptibly() to obtain the response. For more information, refer to Scripts.

When streamingEnabled=true and a CaptureDecorator with captureEntity=true decorates a component, the decorator interrupts streaming for the captured request or response until the whole entity is captured.

Default: false

"serveDeprecatedPrometheusEndpoint": configuration expression<boolean>, optional

A flag to enable or disable the deprecated Prometheus metrics endpoint:

false: Disable the deprecated Prometheus Scrape Endpoint
true: Enable the deprecated Prometheus Scrape Endpoint

Default: true

Example configuration files

Default configuration

When your configuration does not include an admin.json file, the following admin.json is provided by default:

{
  "prefix": "openig",
  "connectors": [
    { "port" : 8080 }
  ]
}

Overriding the default ApiProtectionFilter

The following example shows an admin.json file configured to override the default ApiProtectionFilter that protects the reserved administrative route. This example is used in Set up the UMA example.

{
  "prefix": "openig",
  "connectors": [
    { "port" : 8080 }
  ],
  "heap": [
    {
      "name": "ClientHandler",
      "type": "ClientHandler"
    },
    {
      "name": "ApiProtectionFilter",
      "type": "CorsFilter",
      "config": {
        "policies": [
          {
            "acceptedOrigins": [ "http://app.example.com:8081" ],
            "acceptedMethods": [ "GET", "POST", "DELETE" ],
            "acceptedHeaders": [ "Content-Type" ]
          }
        ]
      }
    }
  ]
}

More information

org.forgerock.openig.http.AdminHttpApplication

GatewayHttpApplication (`config.json` )

The GatewayHttpApplication is the entry point for all incoming gateway requests. It is responsible for initializing a heap of objects, described in Heap objects, and providing the main Handler that receives all the incoming requests.

The configuration is loaded from a JSON-encoded file, expected by default at $HOME/.openig/config/config.json. Objects configured in config.json can be used by config.json and any PingGateway route. They cannot be used by admin.json.

If you provide a config.json, the PingGateway configuration is loaded from that file. If there is no file, the default configuration is loaded. For the default configuration, and the example config.json used in many of the examples in the documentation, refer to the Examples section of this page.

Routes endpoint

The endpoint is defined by the presence and content of config.json, as follows:

When config.json is not provided, the routes endpoint includes the name of the main router in the default configuration, _router.
When config.json is provided with an unnamed main router, the routes endpoint includes the main router name router-handler.
When config.json is provided with a named main router, the routes endpoint includes the provided name or the transformed, URL-friendly name.

Studio deploys and undeploys routes through a main router named _router, which is the name of the main router in the default configuration. If you use a custom config.json, make sure it contains a main router named _router.

Default objects

PingGateway creates objects by default in config.json. To override a default object, configure an object with the same name in config.json.

Configure default objects in config.json and admin.json separately. An object configured in config.json with the same name as an object configured in admin.json is not the same object.

BaseUriDecorator: A decorator to override the scheme, host, and port of the existing request URI. The default BaseUriDecorator is named baseURI. For more information, refer to BaseUriDecorator.

AuditService

Records no audit events. The default AuditService is NoOpAuditService. Learn more from NoOpAuditService.

CaptureDecorator

Captures requests and response messages. The default CaptureDecorator is named capture, and uses the default settings given in CaptureDecorator.

When no capture point is defined in a route, only exceptions thrown during request or response processing are logged.

By default, request and response contexts and entities are not captured. Do one of the following to capture information:

Override the default capture decorator declaration, and set captureEntity to true.
Declare another CaptureDecorator object with an appropriate configuration and use it at your capture points.

The capture decorator logs information about the HTTP request and response messages, along with their respective headers.

ClientHandler

Communicates with third-party services. Learn more from ClientHandler.

ForgeRockClientHandler

Sends Common Audit transaction IDs when communicating with protected applications. The default ForgeRockClientHandler is a Chain, composed of a TransactionIdOutboundFilter and a ClientHandler.

IssuerRepository

ProxyOptions

A proxy to which a ClientHandler or ReverseProxyHandler can submit requests, and an AmService can submit Websocket notifications. For more information, refer to ProxyOptions.

ReverseProxyHandler

Communicates with third-party services. For more information, refer to ReverseProxyHandler.

ScheduledExecutorService

Specifies the number of threads in a pool.

SecretsService (deprecated)

TemporaryStorage

Manages temporary buffers. For more information, refer to TemporaryStorage.

TimerDecorator

Records time spent within filters and handlers. The default TimerDecorator is named timer. For more information, refer to TimerDecorator.

TransactionIdOutboundFilter

Inserts the ID of a transaction into the header of a request.

Sessions

When the heap is configured with a JwtSession object named Session, the object is used as the default session producer. Stateless sessions are created for all requests.

When a JwtSession is not configured for a request, session information is stored in the PingGateway cookie, called by default IG_SESSIONID.

For more information, refer to Sessions and JwtSession.

Usage

{
  "handler": Handler reference,
  "heap": [ object, ... ],
  "properties": object,
  "temporaryStorage": TemporaryStorage reference
}

Properties

"handler": Handler reference, required: The Handler to which PingGateway dispaches requests.

Provide the name of a Handler object defined in the heap or an inline Handler configuration object.

"heap": array of objects, optional

The heap object configuration, described in Heap objects.

"properties": object, optional

Configuration parameters declared as property variables for use in the configuration. See also Route properties.

Default: Null

"temporaryStorage": TemporaryStorage reference, optional

The TemporaryStorage object to buffer content during processing.

Provide the name of a TemporaryStorage object defined in the heap or an inline TemporaryStorage configuration object.

Incoming requests use the temporary storage buffer as follows:

Used only when streamingEnabled is false.
The request is loaded into the PingGateway storage defined in temporaryStorage, before it enters the chain.
If the content length of the request is more than the buffer limit, PingGateway returns an HTTP 413 Payload Too Large.

Default: Use the heap object named TemporaryStorage. Otherwise, use an internally-created TemporaryStorage object named TemporaryStorage that uses default settings for a TemporaryStorage object.

Example configuration files

Default configuration

When your configuration does not include a config.json file, the following configuration is provided by default.

{
    "heap": [
        {
            "name": "_router",
            "type": "Router",
            "config": {
                "scanInterval": "&{ig.router.scan.interval|10 seconds}",
                "defaultHandler": {
                    "type": "DispatchHandler",
                    "config": {
                        "bindings": [
                            {
                                "condition": "${request.method == 'GET' and request.uri.path == '/'}",
                                "handler": {
                                    "type": "WelcomeHandler"
                                }
                            },
                            {
                                "condition": "${request.uri.path == '/'}",
                                "handler": {
                                    "type": "StaticResponseHandler",
                                    "config": {
                                        "status": 405,
                                        "reason": "Method Not Allowed"
                                    }
                                }
                            },
                            {
                                "handler": {
                                    "type": "StaticResponseHandler",
                                    "config": {
                                        "status": 404,
                                        "reason": "Not Found"
                                    }
                                }
                            }
                        ]
                    }
                }
            }
        }
    ],
    "handler": "_router"
}

Notice the following features of the default configuration:

The handler contains a main router named _router. When PingGateway receives an incoming request, _router routes the request to the first route in the configuration whose condition is satisfied.
If the request doesn’t satisfy the condition of any route, it is routed to the defaultHandler. If the request is to access the PingGateway welcome page, PingGateway dispatches the request. Otherwise, PingGateway returns an HTTP status 404 (Resource not found), because the requested resource does not exist.

Example config.json used in the documentation

The following example of config.json is used in many of the examples in the documentation:

{
  "handler": {
    "type": "Router",
    "name": "_router",
    "baseURI": "http://app.example.com:8081",
    "capture": "all"
  },
  "heap": [
    {
      "name": "JwtSession",
      "type": "JwtSession"
    },
    {
      "name": "capture",
      "type": "CaptureDecorator",
      "config": {
        "captureEntity": true,
        "_captureContext": true
      }
    }
  ]
}

Notice the following features of the file:

The handler contains a main router named _router. When PingGateway receives an incoming request, _router routes the request to the first route in the configuration whose condition is satisfied.
The baseURI changes the request URI to point the request to the sample application.
The capture captures the body of the HTTP request and response.
The JwtSession object in the heap can be used in routes to store the session information as JSON Web Tokens (JWT) in a cookie. For more information, refer to JwtSession.

More information

org.forgerock.openig.http.GatewayHttpApplication

Heap objects

An array of objects created and initialized by heaplet objects. Learn more about the configuration in Inline and heap objects.

Usage

{
  "heap": [
    {
      "name": string,
      "type": string,
      "config": {
        type-specific configuration
      }
    }
  ]
}

Properties

"name": string, required: A unique name for an object in the heap.

Routes and other configurations must refer to heap objects by their name property.

"type": string, required: The class name of the heap object.
"config": object, required unless all the fields are optional and the configuration uses only default settings: The configuration of the heap object. The object configuration must conform to the object class.

More information

org.forgerock.openig.heap.Heap

Configuration settings

Filters, handlers, and other objects whose configuration settings are defined by strings, integers, or booleans, can alternatively be defined by expressions that match the expected type.

For information about expressions, refer to Expressions.

System properties

The following properties are supported in PingGateway. Their names have a special meaning in PingGateway, and they should be used only for their stated purpose:

ig.instance.dir, IG_INSTANCE_DIR

The full path to the directory containing configuration and data for the PingGateway instance.

Default: Linux, $HOME/.openig; Windows, %appdata%\OpenIG

For information about how to use a different location, refer to Configuration location.

org.forgerock.json.jose.jwe.compression.max.decompressed.size.bytes

The maximum size in bytes to which a compressed JWT can be decompressed.

Default: 32 KBytes

org.forgerock.secrets.preferDeterministicEcdsa

When this property is true, and the following conditions are met, JWTs are signed with a deterministic Elliptic Curve Digital Signature Algorithm (ECDSA):

ECDSA is used for signing
Bouncy Castle is installed

Default: true

org.forgerock.http.TrustTransactionHeader

When this property is true, all incoming X-ForgeRock-TransactionId headers are trusted. Monitoring or reporting systems that consume the logs can allow requests to be correlated as they traverse multiple servers.

Default: false

org.forgerock.http.util.ignoreFormParamDecodingError

When this property is true, form encoding errors caused by invalid characters are ignored, and encoded values are used instead.

Default: false

org.forgerock.json.jose.jwe.compression.max.decompressed.size.bytes

The maximum size in bytes to which a compressed JWT can be decompressed.

Default: 32 KBytes

PingGateway 2024.6

Required configuration

AdminHttpApplication (admin.json)

Default objects

Provided objects

Usage

Properties

Example configuration files

Default configuration

Overriding the default ApiProtectionFilter

More information

GatewayHttpApplication (config.json )

Routes endpoint

Default objects

Sessions

Usage

Properties

Example configuration files

Default configuration

Example config.json used in the documentation

More information

Heap objects

Usage

Properties

More information

Configuration settings

System properties

AdminHttpApplication (`admin.json`)

GatewayHttpApplication (`config.json` )