PingDS 7.5.1

Log message reference

This document covers server messages, such as those in logs/errors.

IDs: 1-500

ID: 1

Severity: WARNING
Message: The provided string "%s" could not be parsed as a valid Access Control Instruction (ACI) because it failed general ACI syntax evaluation.

ID: 2

Severity: WARNING
Message: The provided Access Control Instruction (ACI) version value "%s" is invalid, only the version 3.0 is supported.

ID: 3

Severity: WARNING
Message: The provided Access Control Instruction access type value "%s" is invalid. A valid access type value is either allow or deny.

ID: 4

Severity: WARNING
Message: The provided Access Control Instruction (ACI) rights values "%s" are invalid. The rights must be a list of 1 to 6 comma-separated keywords enclosed in parentheses.

ID: 5

Severity: WARNING
Message: The provided Access Control Instruction (ACI) rights keyword values "%s" are invalid. The valid rights keyword values are one or more of the following: read, write, add, delete, search, compare or the single value all.

ID: 6

Severity: WARNING
Message: The provided Access Control Instruction (ACI) bind rule value "%s" is invalid because it is missing a close parenthesis that corresponded to the initial open parenthesis.

ID: 7

Severity: WARNING
Message: The provided Access Control Instruction (ACI) bind rule value "%s" is invalid. A valid bind rule value must be in the following form: keyword operator "expression".

ID: 8

Severity: WARNING
Message: The provided Access Control Instruction (ACI) bind rule keyword value "%s" is invalid. A valid keyword value is one of the following: userdn, groupdn, roledn, userattr,ip, dns, dayofweek, timeofday or authmethod.

ID: 9

Severity: WARNING
Message: The provided Access Control Instruction (ACI) bind rule operator value "%s" is invalid. A valid bind rule operator value is either '=' or "!=".

ID: 10

Severity: WARNING
Message: The provided Access Control Instruction (ACI) bind rule expression value corresponding to the keyword value "%s" is missing an expression. A valid bind rule value must be in the following form: keyword operator "expression".

ID: 11

Severity: WARNING
Message: The provided Access Control Instruction (ACI) bind rule boolean operator value "%s" is invalid. A valid bind rule boolean operator value is either "OR" or "AND".

ID: 12

Severity: WARNING
Message: The provided Access Control Instruction (ACI) bind rule keyword string "%s" is invalid for the bind rule operator string "%s".

ID: 13

Severity: WARNING
Message: The provided Access Control Instruction (ACI) bind rule userdn expression failed to URL decode for the following reason: %s.

ID: 14

Severity: WARNING
Message: The provided Access Control Instruction (ACI) bind rule groupdn expression value "%s" is invalid. A valid groupdn keyword expression value requires one or more LDAP URLs in the following format: ldap:///groupdn [|| ldap:///groupdn] …​ [|| ldap:///groupdn].

ID: 15

Severity: WARNING
Message: The provided Access Control Instruction (ACI) bind rule groupdn expression value failed to URL decode for the following reason: %s.

ID: 16

Severity: WARNING
Message: The provided Access Control Instruction (ACI) bind rule ip expression value "%s" is invalid. A valid ip keyword expression requires one or more comma-separated elements of a valid IP address list expression.

ID: 17

Severity: WARNING
Message: The provided Access Control Instruction (ACI) bind rule dns expression value "%s" is invalid. A valid dns keyword expression value requires a valid fully qualified DNS domain name.

ID: 18

Severity: WARNING
Message: The provided Access Control Instruction (ACI) bind rule dns expression value "%s" is invalid, because a wild-card pattern was found in the wrong position. A valid dns keyword wild-card expression value requires the '*' character only be in the leftmost position of the domain name.

ID: 19

Severity: WARNING
Message: The provided Access Control Instruction (ACI) bind rule dayofweek expression value "%s" is invalid, because of an invalid day of week value. A valid dayofweek value is one of the following English three-letter abbreviations for the days of the week: sun, mon, tue, wed, thu, fri, or sat.

ID: 20

Severity: WARNING
Message: The provided Access Control Instruction (ACI) bind rule timeofday expression value "%s" is invalid. A valid timeofday value is expressed as four digits representing hours and minutes in the 24-hour clock (0 to 2359).

ID: 21

Severity: WARNING
Message: The provided Access Control Instruction (ACI) bind rule timeofday expression value "%s" is not in the valid range. A valid timeofday value is expressed as four digits representing hours and minutes in the 24-hour clock (0 to 2359).

ID: 22

Severity: WARNING
Message: The provided Access Control Instruction (ACI) bind rule authmethod expression value "%s" is invalid. A valid authmethod value is one of the following: none, simple,SSL, or "sasl mechanism", where mechanism is one of the supported SASL mechanisms including CRAM-MD5, DIGEST-MD5, and GSSAPI.

ID: 23

Severity: WARNING
Message: The provided Access Control Instruction (ACI) bind rule userattr expression value "%s" is invalid.

ID: 24

Severity: WARNING
Message: The provided Access Control Instruction (ACI) bind rule userattr expression inheritance pattern value "%s" is invalid. A valid inheritance pattern value must have the following format: parent[inheritance_level].attribute#bindType.

ID: 25

Severity: WARNING
Message: The provided Access Control Instruction (ACI) bind rule userattr expression inheritance pattern value "%s" is invalid. The inheritance level value cannot exceed the max level limit of %s.

ID: 26

Severity: WARNING
Message: The provided Access Control Instruction (ACI) bind rule userattr expression inheritance pattern value "%s" is invalid because it is non-numeric.

ID: 27

Severity: WARNING
Message: The provided Access Control Instruction (ACI) target rule value "%s" is invalid. A valid target rule value must be in the following form: keyword operator "expression".

ID: 28

Severity: WARNING
Message: The provided Access Control Instruction (ACI) target keyword value "%s" is invalid. A valid target keyword value is one of the following: target, targetscope, targetfilter, targetattr or targattrfilters.

ID: 29

Severity: WARNING
Message: The provided Access Control Instruction (ACI) target operator value "%s" is invalid. The only valid target operator value for the "%s" keyword is '='.

ID: 30

Severity: WARNING
Message: The provided Access Control Instruction (ACI) target keyword value "%s" was seen multiple times in the ACI "%s".

ID: 31

Severity: WARNING
Message: The provided Access Control Instruction (ACI) target keyword operator value "%s" is invalid. A valid target keyword operator value is either '=' or "!=".

ID: 32

Severity: WARNING
Message: The provided Access Control Instruction (ACI) targetscope expression operator value "%s" is invalid. A valid targetscope expression value is one of the following: one, onelevel, subtree or subordinate.

ID: 33

Severity: WARNING
Message: The provided Access Control Instruction (ACI) target expression value "%s" is invalid. A valid target keyword expression value requires a LDAP URL in the following format: ldap:///distinguished_name_pattern.

ID: 34

Severity: WARNING
Message: The provided Access Control Instruction (ACI) target expression DN value "%s" is invalid. The target expression DN value must be a descendant of the ACI entry DN "%s", if no wild-card is specified in the target expression DN.

ID: 35

Severity: WARNING
Message: The provided Access Control Instruction (ACI) targetattr expression value "%s" is invalid. A valid targetattr keyword expression value requires one or more valid attribute type names in the following format: attribute1 [|| attribute2] …​ [|| attributeN]. Attribute options are not supported.

ID: 36

Severity: WARNING
Message: The provided Access Control Instruction (ACI) targetfilter expression value "%s" is invalid because it is not a valid LDAP filter.

ID: 37

Severity: INFO
Message: An attempt to add the entry "%s" containing an aci attribute type failed, because the authorization DN "%s" lacked modify-acl privileges.

ID: 38

Severity: INFO
Message: An attempt to modify an aci attribute type in the entry "%s" failed, because the authorization DN "%s" lacked modify-acl privileges.

ID: 39

Severity: WARNING
Message: An attempt to add the entry "%s" containing an aci attribute type failed because of the following reason: %s.

ID: 40

Severity: WARNING
Message: An attempt to modify an aci attribute type in the entry "%s" failed because of the following reason: %s.

ID: 41

Severity: WARNING
Message: "%s", located in the entry "%s", because of the following reason: %s.

ID: 42

Severity: INFO
Message: Added %s Access Control Instruction (ACI) attribute types found in context "%s" to the access control evaluation engine.

ID: 43

Severity: WARNING
Message: The provided Access Control Instruction (ACI) targattrfilter expression value %s is invalid because it is not in the correct format. A valid targattrsfilters expression value must be in the following format: "add=attr1: F1 && attr2: F2 …​ && attrN: FN,del= attr1: F1 && attr2: F2 …​ && attrN: FN".

ID: 44

Severity: WARNING
Message: The provided Access Control Instruction (ACI) targattrfilter expression value %s is invalid because the both operation tokens match in the two filter lists.

ID: 45

Severity: WARNING
Message: The provided Access Control Instruction (ACI) targattrfilters expression value %s is invalid because there are more than two filter list statements.

ID: 46

Severity: WARNING
Message: The provided Access Control Instruction (ACI) targattrfilters expression value %s is invalid because the provided filter list string is in the wrong format. A valid targattrfilters filter list must be in the following format: add=attr1: F1 && attr2: F2 …​ && attrN: FN.

ID: 47

Severity: WARNING
Message: The provided Access Control Instruction (ACI) targattrfilters expression value %s is invalid because one or more of the specified filters are invalid for the following reason: %s.

ID: 48

Severity: WARNING
Message: The provided Access Control Instruction (ACI) targattrfilters expression value %s is invalid because one or more of the specified filters are invalid because of non-matching attribute type names in the filter.

ID: 49

Severity: WARNING
Message: The provided Access Control Instruction (ACI) attribute name value %s is invalid. A valid attribute type name must begin with an ASCII letter and must contain only ASCII letters,digits or the "-" character.

ID: 50

Severity: NOTICE
Message: The SASL mechanism "%s" provided in the Access Control Instruction (ACI) bind rule authmethod expression is not one of the currently registered mechanisms in the server.

ID: 51

Severity: WARNING
Message: The provided Access Control Instruction (ACI) bind rule dns expression value "%s" references hostname %s, but the canonical representation for that hostname is configured to be %s. The server will attempt to automatically interpret the correct localhost value.

ID: 52

Severity: WARNING
Message: The provided Access Control Instruction (ACI) bind rule dns expression value "%s" references hostname %s, which resolves to IP address %s, but the canonical hostname for that IP address is %s. This likely means that the provided hostname will never match any clients.

ID: 53

Severity: WARNING
Message: An error occurred while attempting to determine whether hostname %s referenced in dns expression bind rule "%s" used the correct canonical representation: %s. This likely means that the provided hostname will never match any clients.

ID: 54

Severity: INFO
Message: Added %s Global Access Control Instruction (ACI) attribute types to the access control evaluation engine.

ID: 55

Severity: INFO
Message: An unexpected error occurred while processing the ds-cfg-global-aci attribute in configuration entry %s: %s.

ID: 56

Severity: INFO
Message: An unexpected error occurred while processing the aci attributes in the configuration system: %s.

ID: 57

Severity: WARNING
Message: The pattern DN %s is not valid because it contains two consecutive wildcards in an attribute value.

ID: 58

Severity: WARNING
Message: The pattern DN %s is not valid because it uses wildcards for substring matching on an attribute type. A single wildcard is allowed in place of an attribute type.

ID: 59

Severity: WARNING
Message: The pattern DN %s is not valid because it contains a wildcard in an attribute type in a multi-valued RDN.

ID: 60

Severity: WARNING
Message: Selfwrite check skipped because an attribute "%s" with a distinguished name syntax was not a valid DN.

ID: 61

Severity: WARNING
Message: The provided Access Control Instruction (ACI) targetattr expression value "%s" is invalid because the expression contains invalid or duplicate tokens.

ID: 62

Severity: WARNING
Message: The provided Access Control Instruction (ACI) expression value "%s" is invalid because it contains the roledn keyword, which is not supported, replace it with the groupdn keyword.

ID: 63

Severity: WARNING
Message: Failed to decode the Access Control Instruction (ACI)%s.

ID: 64

Severity: WARNING
Message: The server is being put into lockdown mode because invalid ACIs rules were detected either when the server was started or during a backend initialization.

ID: 65

Severity: WARNING
Message: The provided Access Control Instruction (ACI) bind rule userattr expression value failed to URL decode for the following reason: %s.

ID: 66

Severity: WARNING
Message: The provided Access Control Instruction (ACI) bind rule userattr expression value failed to parse because the ldap URL "%s" contains an empty base DN.

ID: 67

Severity: WARNING
Message: The provided Access Control Instruction (ACI) bind rule userattr expression value failed to parse because the attribute field of the ldap URL "%s" either contains more than one description or the field is empty.

ID: 68

Severity: WARNING
Message: The provided Access Control Instruction (ACI) bind rule IP address expression failed to parse because the prefix part of the expression "%s" has an invalid format.

ID: 69

Severity: WARNING
Message: The provided Access Control Instruction (ACI) bind rule IP address expression failed to parse because the prefix value of the expression "%s" was an invalid value. All values must greater than or equal to 0 and either less than or equal 32 for IPV4 addresses or less than or equal to 128 for IPV6 addresses.

ID: 70

Severity: WARNING
Message: The provided Access Control Instruction (ACI) bind rule IP address expression failed to parse because the prefix part of the expression "%s" has an non-numeric value.

ID: 71

Severity: WARNING
Message: The provided Access Control Instruction (ACI) bind rule IP address expression failed to parse because the IPv4 address expression "%s" format was invalid.

ID: 72

Severity: WARNING
Message: The provided Access Control Instruction (ACI) bind rule IP address expression failed to parse because the IPv4 address expression "%s" contains an invalid value. All values of the address must be between 0 and 255.

ID: 73

Severity: WARNING
Message: The provided Access Control Instruction (ACI) bind rule IP address expression failed to parse because the IPv4 address expression "%s" contains a non-numeric value.

ID: 74

Severity: WARNING
Message: The provided Access Control Instruction (ACI) bind rule IP address expression failed to parse because the IPv6 address expression "%s" contains an illegal wildcard character. Wildcards are not supported when using IPv6 addresses in a IP bind rule expression.

ID: 75

Severity: WARNING
Message: The provided Access Control Instruction (ACI) bind rule IP address expression "%s" failed to parse for the following reason: "%s".

ID: 76

Severity: WARNING
Message: The provided Access Control Instruction (ACI) bind rule IP address expression failed to parse because the netmask part of the expression "%s" has an invalid format.

ID: 77

Severity: WARNING
Message: The provided Access Control Instruction (ACI) bind rule IP address expression failed to parse because the netmask part of the expression "%s" has an invalid value.

ID: 78

Severity: WARNING
Message: The provided Access Control Instruction (ACI) targetcontrol expression value "%s" is invalid. A valid targetcontrol keyword expression value requires one or more valid control OID strings in the following format: oid [|| oid1] …​ [|| oidN].

ID: 79

Severity: WARNING
Message: The provided Access Control Instruction (ACI) targetcontrol OID value "%s" could not be parsed because the value contained an illegal character %c at position %d.

ID: 80

Severity: WARNING
Message: The provided Access Control Instruction (ACI) targetcontrol OID value "%s" could not be parsed because the numeric OID contained two consecutive periods at position %d.

ID: 81

Severity: WARNING
Message: The provided Access Control Instruction (ACI) extop expression value "%s" is invalid. A valid extop keyword expression value requires one or more valid extended operation request OID strings in the following format: oid [|| oid1] …​ [|| oidN].

ID: 82

Severity: WARNING
Message: Backend %s does not have a presence index defined for attribute type %s. Access control initialization may take a very long time to complete in this backend.

ID: 83

Severity: WARNING
Message: The provided Access Control Instruction (ACI) bind rule SSF expression "%s" failed to parse for the following reason: "%s".

ID: 84

Severity: WARNING
Message: The provided Access Control Instruction (ACI) bind rule ssf expression value "%s" is not in the valid range. A valid ssf value is in the range of 1 to 1024.

ID: 85

Severity: WARNING
Message: The provided Access Control Instruction (ACI) bind rule timeofday expression "%s" failed to parse for the following reason: "%s".

ID: 86

Severity: NOTICE
Message: The global access control policy '%s' has been added.

ID: 87

Severity: NOTICE
Message: The global access control policy '%s' has been removed.

ID: 88

Severity: NOTICE
Message: The global access control policy '%s' has been modified.

ID: 89

Severity: NOTICE
Message: The global access control engine has been initialized with %d policies.

ID: 90

Severity: ERROR
Message: The global access control policy defined in "%s" could not be parsed because it contains an invalid target DN pattern "%s".

ID: 91

Severity: ERROR
Message: The global access control policy defined in "%s" could not be parsed because it contains an invalid user DN pattern "%s".

ID: 92

Severity: ERROR
Message: The global access control policy defined in "%s" could not be parsed because it contains an unrecognized control alias "%s".

ID: 93

Severity: ERROR
Message: The global access control policy defined in "%s" could not be parsed because it contains an unrecognized extended operation alias "%s".

ID: 94

Severity: INFO
Message: This utility can be used to display basic server information.

ID: 95

Severity: INFO
Message: Adds the local server (with version 7.0 or more) to a topology with older server versions (prior to 7.0).

ID: 96

Severity: INFO
Message: Establishing connections.

ID: 97

Severity: INFO
Message: Checking registration information.

ID: 98

Severity: INFO
Message: %s entries processed (%s %% complete).

ID: 99

Severity: INFO
Message: %s entries processed.

ID: 100

Severity: INFO
Message: %s remaining to be processed.

ID: 101

Severity: ERROR
Message: A target server must be specified either by using LDAP connection options or the --%s option.

ID: 102

Severity: ERROR
Message: An error occurred while reading the server configuration: %s.

ID: 103

Severity: ERROR
Message: An error occurred while printing server status script friendly output: %s.

ID: 104

Severity: INFO
Message: Run status.

ID: 105

Severity: INFO
Message: Started.

ID: 106

Severity: INFO
Message: Stopped.

ID: 107

Severity: INFO
Message: Open connections.

ID: 108

Severity: INFO
Message: General details.

ID: 109

Severity: INFO
Message: Host name.

ID: 110

Severity: INFO
Message: Server ID.

ID: 111

Severity: INFO
Message: Administration port (LDAPS).

ID: 112

Severity: INFO
Message: Version.

ID: 113

Severity: INFO
Message: Installation path.

ID: 114

Severity: INFO
Message: Instance path.

ID: 115

Severity: INFO
Message: Installation and instance path.

ID: 116

Severity: INFO
Message: Running server Java details.

ID: 117

Severity: INFO
Message: Java version.

ID: 118

Severity: INFO
Message: Java vendor.

ID: 119

Severity: INFO
Message: JVM available CPUs.

ID: 120

Severity: INFO
Message: JVM max heap size.

ID: 121

Severity: INFO
Message: Connection handlers.

ID: 122

Severity: INFO
Message: Name.

ID: 123

Severity: INFO
Message: Port.

ID: 124

Severity: INFO
Message: Protocol.

ID: 125

Severity: INFO
Message: Load m1 rate.

ID: 126

Severity: INFO
Message: Load m5 rate.

ID: 127

Severity: INFO
Message: Local backends.

ID: 128

Severity: INFO
Message: Proxy backends.

ID: 129

Severity: INFO
Message: Backend.

ID: 130

Severity: INFO
Message: Type.

ID: 131

Severity: INFO
Message: Active cache.

ID: 132

Severity: INFO
Message: Base DN.

ID: 133

Severity: INFO
Message: Entries.

ID: 134

Severity: INFO
Message: Replication.

ID: 135

Severity: INFO
Message: Receive delay.

ID: 136

Severity: INFO
Message: Replay delay.

ID: 137

Severity: INFO
Message: Disk space.

ID: 138

Severity: INFO
Message: State.

ID: 139

Severity: INFO
Message: Free space.

ID: 140

Severity: INFO
Message: There are no connection handlers setup in the server.

ID: 141

Severity: INFO
Message: There are no local backends setup in the server.

ID: 142

Severity: INFO
Message: There are no proxy backends setup in the server.

ID: 143

Severity: INFO
Message: No disks are monitored by the server.

ID: 144

Severity: INFO
Message: Connect to the server to obtain JVM information.

ID: 145

Severity: INFO
Message: Connect to the server to obtain disk space information.

ID: 146

Severity: ERROR
Message: Unable to perform the search on the monitor backend. To display information, the status tool requires the remote server monitor backend to be enabled.

ID: 147

Severity: INFO
Message: The folder into which the files will be placed into.

ID: 148

Severity: INFO
Message: {directory}.

ID: 149

Severity: INFO
Message: The instance is running.

ID: 150

Severity: INFO
Message: The instance is not running.

ID: 151

Severity: INFO
Message: Password to use to bind to the server.

ID: 152

Severity: INFO
Message: {password}.

ID: 153

Severity: INFO
Message: Path to the JDK utility binaries directory such as jstack.

ID: 154

Severity: INFO
Message: {directory}.

ID: 155

Severity: INFO
Message: Specifies whether audit files are excluded.

ID: 156

Severity: INFO
Message: Specifies whether keystore files are excluded.

ID: 157

Severity: INFO
Message: Specifies that the tool should not interact with the server, that is no LDAP operation, and no jstack sampling.

ID: 158

Severity: INFO
Message: Specifies whether a Java Heap Dump (using jmap) should be produced. The binary file is generated at the same location as the ZIP archive before being added to it; please make sure that the target directory’s volume has sufficient capacity.

ID: 159

Severity: INFO
Message: Maximum number of log files to collect. Ignored if --logsAfterDate is provided.

ID: 160

Severity: INFO
Message: {number}.

ID: 161

Severity: INFO
Message: Collect log files after this date. Format "YYYYMMDDhhmmss" like "20161123143612" = 23 November 2016, 14:36 12s. Overrides --maxLogFiles.

ID: 162

Severity: INFO
Message: {date}.

ID: 163

Severity: INFO
Message: When the server is embedded in OpenAM, there is no PID file. Therefore this option indicates the server PID of the OpenAM application server.

ID: 164

Severity: INFO
Message: {pid}.

ID: 165

Severity: INFO
Message: This tool collects support data from the OpenDJ instance it is bound to.

ID: 166

Severity: NOTICE
Message: <xinclude:include href="description-supportextract.xml" />.

ID: 167

Severity: NOTICE
Message: extract support data.

ID: 168

Severity: ERROR
Message: Error: %s.

ID: 169

Severity: ERROR
Message: The output directory "%s" could not be found.

ID: 170

Severity: ERROR
Message: The number argument for "maxLogFiles" is invalid.

ID: 171

Severity: ERROR
Message: The date argument for "logsAfterDate" is invalid.

ID: 172

Severity: ERROR
Message: The serverPID argument is not a valid number.

ID: 173

Severity: ERROR
Message: The --bindDN and/or --bindPassword arguments are missing.

ID: 174

Severity: ERROR
Message: Could not collect monitoring data from the directory server: %s.

ID: 175

Severity: ERROR
Message: Could not collect all the files.

ID: 176

Severity: ERROR
Message: An error occurred while parsing the command-line arguments: The argument --outputDirectory is required to have a value but none was provided in the argument list and no default value is available.

ID: 177

Severity: INFO
Message: Continuing data gathering though there was an error: %s.

ID: 178

Severity: INFO
Message: The following archive has been created : %s.

ID: 179

Severity: NOTICE
Message: Could not find "java.properties".

ID: 180

Severity: NOTICE
Message: Error while loading "java.properties": %s.

ID: 181

Severity: INFO
Message: No monitoring data can be collected when the server is not running or no server interaction is allowed.

ID: 182

Severity: INFO
Message: No JVM stack dump can be produced when the server is not running or no server interaction is allowed.

ID: 183

Severity: ERROR
Message: Could not find the "%s" command in "%s".

ID: 184

Severity: ERROR
Message: Skipping log "%s" (unsupported config).

ID: 185

Severity: INFO
Message: Collecting the configuration files.

ID: 186

Severity: INFO
Message: Collecting process statistics.

ID: 187

Severity: INFO
Message: Making copy of the %s file before collecting process statistics.

ID: 188

Severity: INFO
Message: Removing file copy %s.

ID: 189

Severity: INFO
Message: Skipping backup of %s log (file not found).

ID: 190

Severity: INFO
Message: Collecting JVM heap dump : using %s.

ID: 191

Severity: INFO
Message: Collecting the log files.

ID: 192

Severity: INFO
Message: Collecting backend statistics.

ID: 193

Severity: INFO
Message: Collecting the GC log files.

ID: 194

Severity: INFO
Message: Skipping GC logs collection because GC logging is not enabled.

ID: 195

Severity: INFO
Message: Collecting ChangelogDb information.

ID: 196

Severity: INFO
Message: No changelogDb data found (is a DS or is not replicated).

ID: 197

Severity: INFO
Message: Collecting the monitoring info from cn=monitor.

ID: 198

Severity: INFO
Message: Collecting process thread information, sample number : %d.

ID: 199

Severity: INFO
Message: Generating stack dump, sample number : %d using %s for pid %d.

ID: 200

Severity: INFO
Message: Processor information.

ID: 201

Severity: INFO
Message: OS information.

ID: 202

Severity: INFO
Message: Extract environment variables.

ID: 203

Severity: INFO
Message: DS /proc files.

ID: 204

Severity: INFO
Message: VM environment information.

ID: 205

Severity: INFO
Message: Disk information.

ID: 206

Severity: INFO
Message: Network information.

ID: 207

Severity: INFO
Message: Linux release.

ID: 208

Severity: INFO
Message: Linux /proc info files.

ID: 209

Severity: INFO
Message: Collecting system node information.

ID: 210

Severity: INFO
Message: Listing the security stores.

ID: 211

Severity: INFO
Message: Adding %s.

ID: 212

Severity: INFO
Message: Skipping %s.

ID: 213

Severity: INFO
Message: Skipping java security stores.

ID: 214

Severity: INFO
Message: Skipping audit files.

ID: 215

Severity: ERROR
Message: There was at least one error during the tasks execution: %s.

ID: 216

Severity: INFO
Message: No value was provided for %s, JDK tool directory is set to %s.

ID: 217

Severity: INFO
Message: Cannot extract process statistics (by running "top" command) on OS '%s'. Only %s dump samples will be collected.

ID: 218

Severity: INFO
Message: This tool manages data synchronization between servers. For replication to work you must initialize the contents of one of the servers with the contents of the others using the '%s' subcommand.

ID: 219

Severity: NOTICE
Message: Manages data synchronization between servers.

ID: 220

Severity: ERROR
Message: An unexpected error has been raised during execution of the tool: '%s'.

ID: 221

Severity: INFO
Message: Initialize replication data for the server.

ID: 222

Severity: INFO
Message: Starting initialization from '%s' to '%s' for base DNs: %s.

ID: 223

Severity: INFO
Message: Starting initialization from '%s' to all replicas for base DNs: %s.

ID: 224

Severity: INFO
Message: Starting initialization for base DN: '%s'.

ID: 225

Severity: NOTICE
Message: An error occurred when launching initialization: %s.

ID: 226

Severity: INFO
Message: Base DN(s) to use. Multiple base DNs can be provided by using this option multiple times.

ID: 227

Severity: INFO
Message: Server ID of the server containing the source data.

ID: 228

Severity: INFO
Message: {serverSource}.

ID: 229

Severity: INFO
Message: Server ID of the server to be initialized.

ID: 230

Severity: INFO
Message: {serverToInitialize}.

ID: 231

Severity: INFO
Message: Initialize all the other servers in the topology.

ID: 232

Severity: NOTICE
Message: A mandatory argument is missing. Choose one and only one argument from '--toServer', '--fromServer' and '--toAllServers'.

ID: 233

Severity: NOTICE
Message: Invalid combination of arguments. Choose one and only one argument from '--toServer', '--fromServer' and '--toAllServers'.

ID: 234

Severity: NOTICE
Message: An error occurred during initialization. Last log details: %s. Task state: %s.

ID: 235

Severity: NOTICE
Message: An error occurred during initialization. Task state: %s.

ID: 236

Severity: NOTICE
Message: Error during the processing of the reset generationID task. Last log details: %s. Task state: %s.

ID: 237

Severity: NOTICE
Message: Error during the processing of the reset generationID task. Task state: %s.

ID: 238

Severity: INFO
Message: Cannot extract the master key pair certificate with alias '%s' because the crypto-manager’s key manager provider of the local server does not contain such key or does not support extracting certificates.

ID: 239

Severity: INFO
Message: Cannot find a CA certificate in the replication trust managers of the local server. Please verify the %s trust-manager-provider configuration value.

ID: 240

Severity: INFO
Message: Base DN(s) to replicate.

ID: 241

Severity: ERROR
Message: Inappropriate server ID '%s' for the local server: it does not represent a numeric value as required to communicate with pre 7.0 servers. Use an integer server ID without leading zeros.

ID: 242

Severity: ERROR
Message: Inappropriate group ID '%s' for the local server: it cannot be converted to an integer, but this is required to communicate with pre 7.0 servers. Use a group ID that can be converted into an integer, or use 'default' if you do not want to set a group ID.

ID: 243

Severity: ERROR
Message: Cannot use server ID '%s' for the local server because it is already used by server '%s' (configuration object %s).

ID: 244

Severity: ERROR
Message: Cannot read the configuration of the local server. The error was: %s.

ID: 245

Severity: ERROR
Message: Cannot read 'cn=admin data' in server '%s'. The error was: %s.

ID: 246

Severity: ERROR
Message: Error when reading the server IDs from all the servers in the old topology. The error was: %s.

ID: 247

Severity: ERROR
Message: Cannot discover the configuration of the local server. The error was: %s.

ID: 248

Severity: ERROR
Message: Cannot add an entry describing the new server to 'cn=admin data' in the remote server '%s' in the existing topology. The error was: %s.

ID: 249

Severity: ERROR
Message: Cannot add '%s' to the bootstrap replication server list on server '%s'. The error was: %s.

ID: 250

Severity: ERROR
Message: Cannot add '%s' to the configuration of replication server on server '%s'. The error was: %s.

ID: 251

Severity: ERROR
Message: Cannot add '%s' to the configuration of replication domain '%s' on server '%s'. The error was: %s.

ID: 252

Severity: ERROR
Message: Cannot retrieve the replication port from server '%s'. The error was: %s.

ID: 253

Severity: ERROR
Message: Cannot configure the local server so it can replicate with the servers in the existing topology. The error was: %s.

ID: 254

Severity: ERROR
Message: Cannot read server ID from server '%s' on DNs '%s' and '%s'. The errors were: %s.

ID: 255

Severity: ERROR
Message: Cannot determine server ID for server '%s' on DNs '%s' and '%s'.

ID: 256

Severity: ERROR
Message: Cannot obtain a connection to server '%s' from the existing topology. The error was: %s.

ID: 257

Severity: ERROR
Message: Cannot obtain a connection for one of the servers in the existing topology. The error was: %s.

ID: 258

Severity: ERROR
Message: Cannot configure all the servers in the existing topology to replicate with the new server. The error was: %s.

ID: 259

Severity: ERROR
Message: An error occurred opening (or closing) a connection to change the configuration of the local server. The error was: %s.

ID: 260

Severity: ERROR
Message: An error occurred opening connections to the server in the existing topology or the new server. The error was: %s.

ID: 261

Severity: ERROR
Message: Once done, restart the server for the changes to take effect.

ID: 262

Severity: ERROR
Message: Cannot read the server ID or the group ID for the local server. The error(s) are: %s.

ID: 263

Severity: ERROR
Message: Cannot add the entry '%s' to the server '%s'. The error was: %s.

ID: 264

Severity: ERROR
Message: Cannot read the entry '%s' on server '%s'. The error was: %s.

ID: 265

Severity: ERROR
Message: Cannot modify the entry '%s' on server '%s' to reconcile it with what is expected by the tool. The error was: %s.

ID: 266

Severity: INFO
Message: Adding server instances keys from the existing topology into 'cn=admin data' in the new server.

ID: 267

Severity: ERROR
Message: Cannot add server instance keys to the new server. The error was: %s.

ID: 268

Severity: INFO
Message: Enabling 'cn=admin data' backend.

ID: 269

Severity: INFO
Message: Creating the trust manager '%s' to be used by replication connections in the local server.

ID: 270

Severity: INFO
Message: Updating replication configuration on local server.

ID: 271

Severity: INFO
Message: Updating replication configuration for baseDN '%s' on local server.

ID: 272

Severity: INFO
Message: Configuring the servers in the topology to talk to the local server.

ID: 273

Severity: INFO
Message: Replication has been successfully configured on the local server. Note that for replication to work you must initialize the contents of the base DNs that are being replicated. Run the following command(s) to do so:.

ID: 274

Severity: INFO
Message: Start disaster recovery for all servers. Read the documentation on disaster recovery carefully before using this command.

ID: 275

Severity: INFO
Message: End disaster recovery for all servers. Read the documentation on disaster recovery carefully before using this command.

ID: 276

Severity: NOTICE
Message: An error occurred while attempting to monitor the task progress. The error was: %s.

ID: 289

Severity: INFO
Message: Check the server error logs for additional details.

ID: 290

Severity: INFO
Message: Purges old replication meta-data from application data.

ID: 291

Severity: INFO
Message: Maximum duration of the command in seconds.

ID: 292

Severity: INFO
Message: {maximum duration in seconds}.

ID: 293

Severity: INFO
Message: Purging old replication meta-data for server '%s' for base DNs: %s.

ID: 294

Severity: NOTICE
Message: An error occurred while purging old replication meta-data: %s.

ID: 295

Severity: NOTICE
Message: An error occurred while purging old replication meta-data. Last log details: %s. Task state: %s.

ID: 296

Severity: NOTICE
Message: An error occurred while purging old replication meta-data. Task state: %s.

ID: 297

Severity: INFO
Message: Re-synchronizes the change-log change number of the target server with the change-log change number of the source server.

ID: 298

Severity: INFO
Message: The change number to use as the basis for re-synchronization.

ID: 299

Severity: INFO
Message: {change number}.

ID: 300

Severity: INFO
Message: Start to re-synchronize the change-log change number of server '%s' from the source server '%s'.

ID: 301

Severity: INFO
Message: Re-synchronizing with change number '%s'.

ID: 302

Severity: INFO
Message: Change number corresponds to start CSN '%s' and base DN '%s'.

ID: 303

Severity: NOTICE
Message: Error when searching change number '%s' in the source server: %s.

ID: 304

Severity: NOTICE
Message: Unable to retrieve change number '%s' in the source server.

ID: 305

Severity: NOTICE
Message: No CSN found for the change number '%s' in the source server.

ID: 306

Severity: NOTICE
Message: No base DN found for the change number '%s' in the source server.

ID: 307

Severity: NOTICE
Message: Unable to retrieve the newest change number in the source server.

ID: 308

Severity: NOTICE
Message: An error occurred when re-synchronizing the change number: %s.

ID: 309

Severity: NOTICE
Message: An error occurred during the re-synchronization of the change number. Last log details: %s. Task state: %s.

ID: 310

Severity: NOTICE
Message: An error occurred during the re-synchronization of the change number. Task state: %s.

ID: 311

Severity: NOTICE
Message: The source and target server have distinct replication domains. As a consequence the change number from the target server can’t be reset from a change number of the source server.

ID: 312

Severity: NOTICE
Message: Unable to find a replicated domain in the target server.

ID: 313

Severity: NOTICE
Message: Unable to find a replicated domain matching the DN '%s' corresponding to the change number.

ID: 314

Severity: NOTICE
Message: An error occurred when searching replicated domains in server. Result code was: '%s'.

ID: 315

Severity: NOTICE
Message: An error occurred when searching replicated domains in server: %s.

ID: 316

Severity: INFO
Message: Displays the status of the replication service and various diagnostics about it. The information is derived from reading cn=monitor on all the servers in the replication topology. The status of a server is one of the following.

  • BAD - DATA MISMATCH: either the fractional replication configuration does not match the backend data, or the initial state of the replicated data does not match other servers and this server must be re-initialized;

  • BAD - TOO LATE: the server has fallen further behind than the replication purge delay and must be re-initialized;

  • GOOD: normal operation, nothing to do;

  • SLOW: the server’s replay delay is greater than five seconds;

  • UNHEALTHY: read the server health errors in the server monitoring data for details.

ID: 317

Severity: INFO
Message: Base DN.

ID: 318

Severity: INFO
Message: Base DN / DS.

ID: 319

Severity: INFO
Message: Base DN / RS.

ID: 320

Severity: INFO
Message: Base DN / RS / DS.

ID: 321

Severity: INFO
Message: Status.

ID: 322

Severity: INFO
Message: Group.

ID: 323

Severity: INFO
Message: Receive delay (ms).

ID: 324

Severity: INFO
Message: Replay delay (ms).

ID: 325

Severity: INFO
Message: Entry count.

ID: 326

Severity: INFO
Message: Server / host port.

ID: 327

Severity: INFO
Message: Error or diagnostic.

ID: 328

Severity: INFO
Message: Displays individual replicas in the output.

ID: 329

Severity: INFO
Message: Displays individual changelog servers in the output.

ID: 330

Severity: INFO
Message: Display replication group information in the output.

ID: 331

Severity: ERROR
Message: An error occurred while reading cn=monitor on server %s: %s.

ID: 332

Severity: ERROR
Message: Error while reading cn=monitor: %s.

ID: 333

Severity: ERROR
Message: Cannot contact server: no admin port could be discovered in its entry %s.

ID: 334

Severity: ERROR
Message: Server is not healthy: %s.

ID: 335

Severity: ERROR
Message: General error: %s.

ID: 336

Severity: INFO
Message: Base DN(s) to display. Multiple base DNs can be provided by using this option multiple times. If no base DNs are provided, then all the base DNs will be displayed.

ID: 337

Severity: INFO
Message: Clears all replication server changelog data for the offline local server; the other replication servers in the topology will transfer any needed data when the server restarts.

ID: 338

Severity: ERROR
Message: A problem occurred while clearing the changelog data: %s.

ID: 339

Severity: INFO
Message: Clearing all replication server changelog data for the local server.

ID: 340

Severity: INFO
Message: Nothing to do: this server does not keep any replication server changelog data.

ID: 341

Severity: ERROR
Message: Cannot obtain a connection for one of the servers in the topology. The error was: %s.

ID: 342

Severity: ERROR
Message: Cannot obtain a connection to server '%s' from the topology. The error was: %s.

ID: 343

Severity: ERROR
Message: An error occurred opening (or closing) a connection to read or change the configuration of the local server. The error was: %s.

ID: 344

Severity: INFO
Message: This server has already been cleaned, there is nothing left to do.

ID: 345

Severity: INFO
Message: The remaining cleanup on this server cannot be performed because the administrator user '%s' in the admin backend was used to bind to the server. You should run again this command using a bind DN, such as "uid=admin", which lies outside the "cn=admin data" backend to be able to complete the cleanup on this server.

ID: 346

Severity: ERROR
Message: Cannot disable admin backend on the local server. The error was: %s.

ID: 347

Severity: ERROR
Message: Cannot update configuration for server '%s'. The error was: %s.

ID: 348

Severity: ERROR
Message: Cannot read monitor entries under '%s' on the local server. The error was: %s.

ID: 349

Severity: ERROR
Message: Cannot delete entries under '%s' in admin backend. The error was: %s.

ID: 350

Severity: INFO
Message: All servers have been cleaned.

ID: 351

Severity: INFO
Message: All servers have been cleaned. The admin backend will remain enabled because it contains secret keys that may be used by reversible password storage schemes.

ID: 352

Severity: INFO
Message: The server %s has now been cleaned.

ID: 353

Severity: INFO
Message: Servers have been cleaned, however the administrator user '%s' in the admin backend was not removed because it was used to bind to the server. To remove it, you should run the following commands on all servers using a bind DN, such as "uid=admin", which lies outside the "cn=admin data" backend:.

ID: 354

Severity: INFO
Message: Removing servers from admin backend.

ID: 355

Severity: INFO
Message: Removing instance keys from admin backend.

ID: 356

Severity: INFO
Message: Removing administrators from admin backend.

ID: 357

Severity: INFO
Message: Cleaning and updating configuration of server %s.

ID: 358

Severity: INFO
Message: Set bootstrap servers configuration for server %s.

ID: 359

Severity: INFO
Message: Disable admin backend for server %s.

ID: 360

Severity: WARNING
Message: Some reversible password storage schemes are enabled in the configuration, note that it won’t be possible to use them in password policies since the admin data backend has been disabled.

ID: 361

Severity: INFO
Message: Clean all the servers (with version 7.0 or more) that have been migrated from a topology of older servers (version prior to 7.0).

ID: 362

Severity: ERROR
Message: An attempt was made to configure the root DSE backend without providing a configuration entry. This is not allowed.

ID: 363

Severity: WARNING
Message: Base DN "%s" is configured as one of the subordinate base DNs to use for searches below the root DSE. However, this base DN is not handled by any suffix registered with the Directory Server and will therefore not be used.

ID: 364

Severity: ERROR
Message: Unwilling to update entry "%s" because modify operations are not supported in the root DSE backend. If you wish to alter the contents of the root DSE itself, then it may be possible to do so by modifying the "%s" entry in the configuration.

ID: 365

Severity: ERROR
Message: Unwilling to perform a search (connection ID %d, operation ID %d) with a base DN of "%s" in the root DSE backend. The base DN for searches in this backend must be the DN of the root DSE itself.

ID: 366

Severity: ERROR
Message: Unable to process the search with connection ID %d and operation ID %d because it had an invalid scope of %s.

ID: 367

Severity: ERROR
Message: An unexpected error occurred while trying to open the LDIF writer for the root DSE backend: %s.

ID: 368

Severity: ERROR
Message: An unexpected error occurred while trying to export the root DSE entry to the specified LDIF target: %s.

ID: 369

Severity: INFO
Message: The root DSE configuration has been updated so that it will now use a new set of user-defined attributes.

ID: 370

Severity: ERROR
Message: An attempt was made to configure the monitor backend without providing a configuration entry. This is not allowed, and no monitor information will be available over protocol.

ID: 371

Severity: ERROR
Message: Unwilling to add entry "%s" because add operations are not supported in the "%s" backend.

ID: 372

Severity: ERROR
Message: Unwilling to remove entry "%s" because delete operations are not supported in the "%s" backend.

ID: 373

Severity: ERROR
Message: Unwilling to update entry "%s" because modify operations are not supported in the monitor backend. If you wish to alter the contents of the base monitor entry itself, then it may be possible to do so by modifying the "%s" entry in the configuration.

ID: 374

Severity: ERROR
Message: Unwilling to rename entry "%s" because modify DN operations are not supported in the "%s" backend.

ID: 375

Severity: ERROR
Message: An error occurred while attempting to export the base monitor entry: %s.

ID: 376

Severity: ERROR
Message: An error occurred while attempting to export the monitor entry for monitor provider %s: %s.

ID: 377

Severity: ERROR
Message: The "%s" backend does not support LDIF import operations.

ID: 378

Severity: INFO
Message: The monitor configuration has been updated so that it will now use a new set of user-defined attributes.

ID: 379

Severity: ERROR
Message: Unable to retrieve the requested entry from the "%s" backend because the provided DN was null.

ID: 380

Severity: ERROR
Message: Unable to retrieve the requested entry %s from the monitor backend because the DN is not below the monitor base of %s.

ID: 381

Severity: ERROR
Message: An attempt was made to configure the schema backend without providing a configuration entry. This is not allowed, and no schema information will be available over protocol.

ID: 382

Severity: ERROR
Message: An error occurred while attempting to export the base schema entry: %s.

ID: 383

Severity: ERROR
Message: Unable to retrieve the requested entry %s from the schema backend because the DN is equal to one of the schema entry DNs.

ID: 384

Severity: ERROR
Message: An unexpected error occurred while trying to open the LDIF writer for the schema backend: %s.

ID: 386

Severity: ERROR
Message: The Directory Server was unable to obtain a lock on entry %s after multiple attempts. This could mean that the entry is already locked by a long-running operation or that the entry has previously been locked but was not properly unlocked.

ID: 387

Severity: ERROR
Message: The task defined in entry %s is invalid because it has an invalid state %s.

ID: 388

Severity: ERROR
Message: An error occurred while trying to parse the scheduled start time value %s from task entry %s.

ID: 389

Severity: ERROR
Message: An error occurred while trying to parse the actual start time value %s from task entry %s.

ID: 390

Severity: ERROR
Message: An error occurred while trying to parse the completion time value %s from task entry %s.

ID: 391

Severity: ERROR
Message: Task entry %s is missing required attribute %s.

ID: 392

Severity: ERROR
Message: There are multiple instances of attribute %s in task entry %s.

ID: 393

Severity: ERROR
Message: There are multiple values for attribute %s in task entry %s.

ID: 394

Severity: ERROR
Message: An error occurred while executing the task defined in entry %s: %s.

ID: 395

Severity: ERROR
Message: The provided recurring task entry does not contain attribute %s which is needed to hold the recurring task ID.

ID: 396

Severity: ERROR
Message: The provided recurring task entry contains multiple attributes with type %s, which is used to hold the recurring task ID, but only a single instance is allowed.

ID: 397

Severity: ERROR
Message: The provided recurring task entry does not contain any values for the %s attribute, which is used to specify the recurring task ID.

ID: 398

Severity: ERROR
Message: The provided recurring task entry contains multiple values for the %s attribute, which is used to specify the recurring task ID, but only a single value is allowed.

ID: 399

Severity: ERROR
Message: The provided recurring task entry does not contain attribute %s which is needed to specify recurring task schedule.

ID: 400

Severity: ERROR
Message: The provided recurring task entry contains multiple attributes with type %s, which is used to hold recurring task schedule, but only a single instance is allowed.

ID: 401

Severity: ERROR
Message: The provided recurring task entry does not contain any values for the %s attribute, which is used to specify recurring task schedule.

ID: 402

Severity: ERROR
Message: The provided recurring task entry contains multiple values for the %s attribute, which is used to specify recurring task schedule, but only a single value is allowed.

ID: 403

Severity: ERROR
Message: An error occurred while attempting to load class %s specified in attribute %s of the provided recurring task entry: %s. Does this class exist in the Directory Server classpath?.

ID: 404

Severity: ERROR
Message: An error occurred while trying to create an instance of class %s as a Directory Server task. Is this class a subclass of %s?.

ID: 405

Severity: ERROR
Message: An error occurred while attempting to perform internal initialization on an instance of class %s with the information contained in the provided entry: %s.

ID: 406

Severity: ERROR
Message: The specified task data backing file %s already exists and the Directory Server will not attempt to overwrite it. Please delete or rename the existing file before attempting to use that path for the new backing file, or choose a new path.

ID: 407

Severity: ERROR
Message: The specified path %s for the new task data backing file appears to be an invalid path. Please choose a new path for the task data backing file.

ID: 408

Severity: ERROR
Message: The parent directory %s for the new task data backing file %s does not exist. Please create this directory before attempting to use this path for the new backing file or choose a new path.

ID: 409

Severity: ERROR
Message: The parent directory %s for the new task data backing file %s exists but is not a directory. Please choose a new path for the task data backing file.

ID: 410

Severity: ERROR
Message: An error occurred while attempting to determine the new path to the task data backing file: %s.

ID: 411

Severity: INFO
Message: The completed task retention time has been updated to %d seconds. This will take effect immediately.

ID: 412

Severity: INFO
Message: The path to the task data backing file has been changed to %s. A snapshot of the current task configuration has been written to that file and it will continue to be used for future updates.

ID: 413

Severity: ERROR
Message: New entries in the task backend may only be added immediately below %s for scheduled tasks or immediately below %s for recurring tasks.

ID: 414

Severity: INFO
Message: This file contains the data used by the Directory Server task scheduler backend. Do not edit this file directly, as there is a risk that those changes will be lost. Scheduled and recurring task definitions should only be edited using the administration utilities provided with the Directory Server.

ID: 415

Severity: ERROR
Message: Unable to add recurring task %s to the task scheduler because another recurring task already exists with the same ID.

ID: 416

Severity: ERROR
Message: Unable to schedule task %s because another task already exists with the same ID.

ID: 417

Severity: WARNING
Message: Unable to add completed task %s to the task scheduler because another task already exists with the same ID.

ID: 418

Severity: ERROR
Message: An error occurred while attempting to schedule the next iteration of recurring task %s: %s.

ID: 419

Severity: ERROR
Message: An error occurred while attempting to read an entry from the tasks backing file %s on or near line %d: %s. This is not a fatal error, so the task scheduler will attempt to continue parsing the file and schedule any additional tasks that it contains.

ID: 420

Severity: ERROR
Message: An error occurred while attempting to read an entry from the tasks backing file %s on or near line %d: %s. This is an unrecoverable error, and parsing cannot continue.

ID: 421

Severity: ERROR
Message: Entry %s read from the tasks backing file is invalid because it has no parent and does not match the task root DN of %s.

ID: 422

Severity: ERROR
Message: An error occurred while attempting to parse entry %s as a recurring task and add it to the scheduler: %s.

ID: 423

Severity: ERROR
Message: An error occurred while attempting to parse entry %s as a task and add it to the scheduler: %s.

ID: 424

Severity: ERROR
Message: Entry %s read from the tasks backing file %s has a DN which is not valid for a task or recurring task definition and will be ignored.

ID: 425

Severity: ERROR
Message: An error occurred while attempting to read from the tasks data backing file %s: %s.

ID: 426

Severity: ERROR
Message: An error occurred while attempting to create a new tasks backing file %s for use with the task scheduler: %s.

ID: 427

Severity: ERROR
Message: The provided task entry does not contain attribute %s which is needed to specify the fully-qualified name of the class providing the task logic.

ID: 428

Severity: ERROR
Message: The provided task entry contains multiple attributes with type %s, which is used to hold the task class name, but only a single instance is allowed.

ID: 429

Severity: ERROR
Message: The provided task entry does not contain any values for the %s attribute, which is used to specify the fully-qualified name of the class providing the task logic.

ID: 430

Severity: ERROR
Message: The provided task entry contains multiple values for the %s attribute, which is used to specify the task class name, but only a single value is allowed.

ID: 431

Severity: ERROR
Message: An error occurred while attempting to load class %s specified in attribute %s of the provided task entry: %s. Does this class exist in the Directory Server classpath?.

ID: 432

Severity: ERROR
Message: An error occurred while trying to create an instance of class %s as a Directory Server task. Is this class a subclass of %s?.

ID: 433

Severity: ERROR
Message: An error occurred while attempting to perform internal initialization on an instance of class %s with the information contained in the provided entry: %s.

ID: 434

Severity: WARNING
Message: An error occurred while attempting to rename the current tasks backing file from %s to %s: %s. The previous task configuration (which does not reflect the latest update) may be lost.

ID: 435

Severity: ERROR
Message: An error occurred while attempting to rename the new tasks backing file from %s to %s: %s. If the Directory Server is restarted, then the task scheduler may not work as expected.

ID: 436

Severity: ERROR
Message: An error occurred while attempting to write the new tasks data backing file %s: %s. Configuration information reflecting the latest update may be lost.

ID: 437

Severity: INFO
Message: The tasks backend is being shut down.

ID: 438

Severity: INFO
Message: The root DSE configuration has been updated so that configuration attribute %s will now use a value of %s.

ID: 439

Severity: ERROR
Message: Unable to remove pending task %s because no such task exists.

ID: 440

Severity: ERROR
Message: Unable to remove pending task %s because the task is no longer pending.

ID: 441

Severity: ERROR
Message: Unable to remove completed task %s because no such task exists in the list of completed tasks.

ID: 442

Severity: ERROR
Message: Unable to remove entry %s from the task backend because its DN is either not appropriate for that backend or it is not below the scheduled or recurring tasks base entry.

ID: 443

Severity: ERROR
Message: Unable to remove entry %s from the task backend because there is no scheduled task associated with that entry DN.

ID: 444

Severity: ERROR
Message: Unable to delete entry %s from the task backend because the associated task is currently running.

ID: 445

Severity: ERROR
Message: Unable to remove entry %s from the task backend because there is no recurring task associated with that entry DN.

ID: 446

Severity: ERROR
Message: Unable to process the search operation in the task backend because the provided base DN %s is not valid for entries in the task backend.

ID: 447

Severity: ERROR
Message: Unable to process the search operation in the task backend because there is no scheduled task associated with the provided search base entry %s.

ID: 448

Severity: ERROR
Message: Unable to process the search operation in the task backend because there is no recurring task associated with the provided search base entry %s.

ID: 449

Severity: ERROR
Message: Unwilling to update entry "%s" because modify operations are not supported in the "%s" backend.

ID: 450

Severity: ERROR
Message: Exactly one base DN must be provided for use with the memory-based backend.

ID: 451

Severity: ERROR
Message: Entry %s already exists in the memory-based backend.

ID: 452

Severity: ERROR
Message: Entry %s does not belong in the memory-based backend.

ID: 453

Severity: ERROR
Message: Unable to add entry %s because its parent entry %s does not exist in the memory-based backend.

ID: 454

Severity: ERROR
Message: Entry %s does not exist in the "%s" backend.

ID: 455

Severity: ERROR
Message: Cannot delete entry %s because it has one or more subordinate entries.

ID: 456

Severity: ERROR
Message: Unable to create an LDIF writer: %s.

ID: 457

Severity: ERROR
Message: Cannot write entry %s to LDIF: %s.

ID: 458

Severity: ERROR
Message: Unable to create an LDIF reader: %s.

ID: 459

Severity: ERROR
Message: An unrecoverable error occurred while reading from LDIF: %s.

ID: 460

Severity: ERROR
Message: An unexpected error occurred while processing the import: %s.

ID: 461

Severity: ERROR
Message: Cannot rename entry %s because it has one or more subordinate entries.

ID: 462

Severity: ERROR
Message: Cannot rename entry %s because the target entry is in a different backend.

ID: 463

Severity: ERROR
Message: Cannot rename entry %s because the new parent entry %s doesn’t exist.

ID: 464

Severity: ERROR
Message: An error occurred while attempting to register the base DNs %s in the Directory Server: %s.

ID: 465

Severity: ERROR
Message: The schema backend does not support the %s modification type.

ID: 466

Severity: ERROR
Message: The schema backend does not support the modification of the %s attribute type. Only attribute types, object classes, ldap syntaxes, name forms, DIT content rules, DIT structure rules, and matching rule uses may be modified.

ID: 467

Severity: ERROR
Message: An error occurred while attempting to write the updated schema: %s.

ID: 468

Severity: ERROR
Message: The server will not allow removing all values for the %s attribute type in the server schema.

ID: 469

Severity: ERROR
Message: Circular reference detected for attribute type %s in which the superior type chain references the attribute type itself.

ID: 470

Severity: ERROR
Message: Circular reference detected for objectclass %s in which the superior class chain references the objectclass itself.

ID: 471

Severity: ERROR
Message: Circular reference detected for DIT structure rule %s in which the superior rule chain references the DIT structure rule itself.

ID: 472

Severity: ERROR
Message: An error occurred while attempting to create copies of the existing schema files before applying the updates: %s. The server was able to restore the original schema configuration, so no additional cleanup should be required.

ID: 473

Severity: ERROR
Message: An error occurred while attempting to create copies of the existing schema files before applying the updates: %s. A problem also occurred when attempting to restore the original schema configuration, so the server may be left in an inconsistent state and could require manual cleanup.

ID: 474

Severity: ERROR
Message: An error occurred while attempting to write new versions of the server schema files: %s. The server was able to restore the original schema configuration, so no additional cleanup should be required.

ID: 475

Severity: ERROR
Message: An error occurred while attempting to write new versions of the server schema files: %s. A problem also occurred when attempting to restore the original schema configuration, so the server may be left in an inconsistent state and could require manual cleanup.

ID: 476

Severity: ERROR
Message: Unable to remove attribute type %s from the server schema because no such attribute type is defined.

ID: 477

Severity: ERROR
Message: Unable to remove objectclass %s from the server schema because no such objectclass is defined.

ID: 478

Severity: ERROR
Message: Unable to remove name form %s from the server schema because no such name form is defined.

ID: 479

Severity: ERROR
Message: Unable to remove DIT content rule %s from the server schema because no such DIT content rule is defined.

ID: 480

Severity: ERROR
Message: Unable to remove DIT structure rule %s from the server schema because no such DIT structure rule is defined.

ID: 481

Severity: ERROR
Message: Unable to remove matching rule use %s from the server schema because no such matching rule use is defined.

ID: 482

Severity: ERROR
Message: You do not have sufficient privileges to modify the Directory Server schema.

ID: 483

Severity: ERROR
Message: Unable to find a file containing concatenated schema element definitions in order to determine if any schema changes were made with the server offline. The file was expected in the %s directory and should have been named either %s or %s.

ID: 484

Severity: ERROR
Message: An error occurred while attempting to determine whether any schema changes had been made by directly editing the schema files with the server offline: %s.

ID: 485

Severity: ERROR
Message: An error occurred while attempting to write file %s containing a concatenated list of all server schema elements: %s. The server may not be able to accurately identify any schema changes made with the server offline.

ID: 486

Severity: ERROR
Message: The Directory Server is not configured to allow task %s to be invoked.

ID: 488

Severity: ERROR
Message: Indexes are not supported in the "%s" backend.

ID: 489

Severity: ERROR
Message: LDIF import and export operations are not supported in the "%s" backend.

ID: 490

Severity: ERROR
Message: The root container for backend %s has not been initialized preventing this backend from processing the requested operation.

ID: 491

Severity: ERROR
Message: Entry %s cannot be modified because it does not represent a task entry. Only task entries may be modified in the task backend.

ID: 492

Severity: ERROR
Message: Entry %s cannot be modified because it does not represent a valid task in the server.

ID: 493

Severity: ERROR
Message: Entry %s cannot be modified because the associated task has completed running. Completed tasks cannot be modified.

ID: 494

Severity: ERROR
Message: Entry %s cannot be modified because the server does not currently support modifying recurring task entries.

ID: 495

Severity: ERROR
Message: The task associated with entry %s is currently running. The only modification allowed for running tasks is to replace the value of the ds-task-state attribute with "cancel".

ID: 496

Severity: INFO
Message: Task processing was interrupted by a modify request to cancel the task.

ID: 497

Severity: ERROR
Message: The LDIF backend defined in configuration entry %s only supports a single base DN, but was configured for use with multiple base DNs.

ID: 498

Severity: ERROR
Message: LDIF file %s configured for use with the LDIF backend defined in configuration entry %s has multiple entries with a DN of %s.

ID: 499

Severity: ERROR
Message: LDIF file %s configured for use with the LDIF backend defined in configuration entry %s includes entry %s which is not below the base DN defined for that backend.

ID: 500

Severity: ERROR
Message: LDIF file %s configured for use with the LDIF backend defined in configuration entry %s contains entry %s but its parent entry has not yet been read.

IDs: 501-1000

ID: 501

Severity: ERROR
Message: An error occurred while trying to create file %s to write an updated version of the data for the LDIF backend defined in configuration entry %s: %s.

ID: 502

Severity: ERROR
Message: An error occurred while trying to write updated data to file %s for the LDIF backend defined in configuration entry %s: %s.

ID: 503

Severity: ERROR
Message: An error occurred while attempting to rename file %s to %s while writing updated data for the LDIF backend defined in configuration entry %s: %s.

ID: 504

Severity: ERROR
Message: Entry %s already exists in the LDIF backend.

ID: 505

Severity: ERROR
Message: The parent for entry %s does not exist.

ID: 506

Severity: ERROR
Message: Entry %s does not exist.

ID: 507

Severity: ERROR
Message: Entry %s has one or more subordinate entries and cannot be deleted until all of its subordinate entries are removed first.

ID: 508

Severity: ERROR
Message: Entry %s does not exist.

ID: 509

Severity: ERROR
Message: Source entry %s does not exist.

ID: 510

Severity: ERROR
Message: Target entry %s already exists.

ID: 511

Severity: ERROR
Message: The new parent DN %s does not exist.

ID: 512

Severity: ERROR
Message: Entry %s specified as the search base DN does not exist.

ID: 513

Severity: ERROR
Message: An error occurred while trying to create the writer for the LDIF export operation: %s.

ID: 514

Severity: ERROR
Message: An error occurred while trying to write entry %s during the LDIF export: %s.

ID: 515

Severity: ERROR
Message: An error occurred while trying to create the reader for the LDIF import operation: %s.

ID: 516

Severity: ERROR
Message: An unrecoverable error occurred while attempting to read data from the import file: %s. The LDIF import cannot continue.

ID: 517

Severity: INFO
Message: The change to the LDIF file path will not take effect until the backend is disabled and re-enabled.

ID: 518

Severity: INFO
Message: The change to the LDIF backend base DN will not take effect until the backend is disabled and re-enabled.

ID: 519

Severity: ERROR
Message: The target entry %s does not exist.

ID: 520

Severity: ERROR
Message: The target entry %s does not exist.

ID: 521

Severity: ERROR
Message: This backend does not provide support for the numSubordinates operational attribute.

ID: 522

Severity: NOTICE
Message: The backend %s is now taken offline.

ID: 523

Severity: ERROR
Message: The provided recurring task entry attribute %s holding the recurring task schedule has invalid number of tokens.

ID: 524

Severity: ERROR
Message: The provided recurring task entry attribute %s holding the recurring task schedule has invalid minute token.

ID: 525

Severity: ERROR
Message: The provided recurring task entry attribute %s holding the recurring task schedule has invalid hour token.

ID: 526

Severity: ERROR
Message: The provided recurring task entry attribute %s holding the recurring task schedule has invalid day of the month token.

ID: 527

Severity: ERROR
Message: The provided recurring task entry attribute %s holding the recurring task schedule has invalid month of the year token.

ID: 528

Severity: ERROR
Message: The provided recurring task entry attribute %s holding the recurring task schedule has invalid day of the week token.

ID: 529

Severity: ERROR
Message: The provided recurring task entry attribute %s holding the recurring task schedule has invalid tokens combination yielding a nonexistent calendar date.

ID: 530

Severity: ERROR
Message: An error occurred while attempting to export task backend data: %s.

ID: 531

Severity: INFO
Message: JE backend '%s' does not specify the number of cleaner threads: defaulting to %d threads.

ID: 532

Severity: INFO
Message: JE backend '%s' does not specify the number of lock tables: defaulting to %d.

ID: 533

Severity: ERROR
Message: Unable to schedule task %s because its dependency task %s is missing.

ID: 534

Severity: NOTICE
Message: %s task %s started execution.

ID: 535

Severity: NOTICE
Message: %s task %s finished execution in the state %s.

ID: 536

Severity: ERROR
Message: Unable to remove ldap syntax description %s from the server schema because no such ldap syntax description is defined.

ID: 537

Severity: ERROR
Message: An error occurred while attempting to decode the ldapsyntax description "%s": %s.

ID: 538

Severity: ERROR
Message: The provided recurring task schedule value has an invalid number of tokens.

ID: 539

Severity: ERROR
Message: The provided recurring task schedule value has an invalid minute token.

ID: 540

Severity: ERROR
Message: The provided recurring task schedule value has an invalid hour token.

ID: 541

Severity: ERROR
Message: The provided recurring task schedule value has an invalid day of the month token.

ID: 542

Severity: ERROR
Message: The provided recurring task schedule value has an invalid month of the year token.

ID: 543

Severity: ERROR
Message: The provided recurring task schedule value has an invalid day of the week token.

ID: 544

Severity: ERROR
Message: The schema backend does not support the Replace modification type for the %s attribute type.

ID: 545

Severity: ERROR
Message: An error occurred while trying to close file %s for the LDIF backend defined in configuration entry %s: %s.

ID: 546

Severity: ERROR
Message: The file %s written for the LDIF backend defined in configuration entry %s is 0 bytes long and unusable.

ID: 547

Severity: ERROR
Message: Configuration attribute ds-cfg-db-cache-size has a value of %d but the JVM has only %d available. Consider using ds-cfg-db-cache-percent.

ID: 548

Severity: ERROR
Message: Configuration attribute ds-cfg-db-cache-percent has a value of %d%% but the JVM has only %d%% available.

ID: 549

Severity: ERROR
Message: Unable to process the virtual list view request because the target assertion could not be decoded as a valid value for the '%s' attribute type.

ID: 550

Severity: WARNING
Message: Disk free space of %d bytes for directory %s is now below low threshold of %d bytes. Backend %s is now locked down and will no longer accept any operations from clients until sufficient disk space is restored.

ID: 551

Severity: WARNING
Message: Disk free space of %d bytes for directory %s is now below disk low threshold of %d bytes. Backend %s is now offline and will no longer accept any operations until sufficient disk space is restored.

ID: 552

Severity: ERROR
Message: An error occurred while trying to list the files to backup for backend '%s': %s.

ID: 553

Severity: ERROR
Message: Insufficient free memory (%d bytes) to perform import. At least %d bytes of free memory is required.

ID: 554

Severity: ERROR
Message: Index for attribute '%s' cannot be created for matching rule '%s' because it cannot be found in the schema. Fix the matching rule name in the config or add the matching rule to the schema.

ID: 555

Severity: ERROR
Message: Unable to process the virtual list view request because the target start position was before the beginning of the result set.

ID: 556

Severity: ERROR
Message: The entry database does not contain a record for ID %s.

ID: 557

Severity: ERROR
Message: Execution error during backend operation: %s.

ID: 558

Severity: ERROR
Message: The backend database directory could not be created: %s.

ID: 559

Severity: WARNING
Message: This platform does not support setting file permissions %s to the database directory %s.

ID: 560

Severity: WARNING
Message: An error occurred while setting file permissions for the backend database directory %s: %s.

ID: 561

Severity: NOTICE
Message: The change to the DB directory will not take effect until the backend is restarted. The DB files from the previous directory %s must be moved to the new directory %s after shutting down the backend to retain the existing data.

ID: 562

Severity: ERROR
Message: The backend database directory '%s' is not a valid directory.

ID: 563

Severity: ERROR
Message: The entry '%s' cannot be added because an entry with that name already exists.

ID: 564

Severity: ERROR
Message: The entry '%s' cannot be added because its parent entry does not exist.

ID: 565

Severity: ERROR
Message: There is no index configured for attribute type '%s'.

ID: 566

Severity: ERROR
Message: An error occurred while attempting to decode an attribute description token from the compressed schema definitions: %s.

ID: 567

Severity: ERROR
Message: An error occurred while attempting to decode an object class set token from the compressed schema definitions: %s.

ID: 568

Severity: ERROR
Message: An error occurred while attempting to store compressed schema information in the database: %s.

ID: 569

Severity: ERROR
Message: An error occurred while parsing the search filter %s defined for VLV index %s: %s.

ID: 570

Severity: ERROR
Message: Sort attribute %s for VLV index %s is not defined in the server schema.

ID: 571

Severity: ERROR
Message: Database exception: %s.

ID: 572

Severity: ERROR
Message: A plugin caused the delete operation to be aborted while deleting a subordinate entry %s.

ID: 573

Severity: ERROR
Message: The entry '%s' cannot be removed because it has subordinate entries.

ID: 574

Severity: ERROR
Message: The entry '%s' cannot be removed because it does not exist.

ID: 575

Severity: ERROR
Message: An entry container named '%s' is already registered for base DN '%s'.

ID: 576

Severity: ERROR
Message: The entry database does not contain a valid record for ID %s.

ID: 577

Severity: ERROR
Message: I/O error occurred while exporting entry: %s.

ID: 578

Severity: ERROR
Message: The backend must be disabled before the import process can start.

ID: 579

Severity: ERROR
Message: Unable to create the temporary directory %s.

ID: 580

Severity: ERROR
Message: The import has been aborted because the entry '%s' does not have a parent entry.

ID: 581

Severity: ERROR
Message: Entry record is not compatible with this version of the backend database. Entry version: %x.

ID: 582

Severity: ERROR
Message: An error occurred while reading from index %s. The index seems to be corrupt and is now operating in a degraded state. The index must be rebuilt before it can return to normal operation.

ID: 583

Severity: ERROR
Message: The following paged results control cookie value was not recognized: %s.

ID: 584

Severity: ERROR
Message: A plugin caused the modify DN operation to be aborted while moving and/or renaming an entry from %s to %s.

ID: 585

Severity: ERROR
Message: The entry cannot be renamed to '%s' because an entry with that name already exists.

ID: 586

Severity: ERROR
Message: The entry '%s' cannot be renamed because it does not exist.

ID: 587

Severity: ERROR
Message: The entry '%s' cannot be modified because it does not exist.

ID: 588

Severity: ERROR
Message: The entry cannot be moved because the new parent entry '%s' does not exist.

ID: 589

Severity: ERROR
Message: The database environment could not be opened: %s.

ID: 590

Severity: ERROR
Message: Rebuilding system index(es) must be done with the backend containing the base DN disabled.

ID: 591

Severity: ERROR
Message: The backend database files could not be removed: %s.

ID: 592

Severity: ERROR
Message: The requested search operation included both the simple paged results control and the virtual list view control. These controls are mutually exclusive and cannot be used together.

ID: 593

Severity: ERROR
Message: The search results cannot be sorted because the given search request is not indexed.

ID: 594

Severity: ERROR
Message: The search base entry '%s' does not exist.

ID: 595

Severity: ERROR
Message: You do not have sufficient privileges to perform an unindexed search.

ID: 596

Severity: ERROR
Message: Unchecked exception during database transaction: %s.

ID: 597

Severity: ERROR
Message: There is no VLV index configured with name '%s'.

ID: 598

Severity: INFO
Message: The filter value exceeded the index entry limit for the %s index.

ID: 599

Severity: INFO
Message: %s index is invalid and needs to be rebuilt.

ID: 600

Severity: INFO
Message: %s index type is disabled for the %s attribute.

ID: 601

Severity: INFO
Message: Average number of entries referenced is %.2f/record.

ID: 602

Severity: INFO
Message: Free memory = %d MB, Cache miss rate = %.1f/record.

ID: 603

Severity: INFO
Message: Number of records that exceed the entry limit: %d.

ID: 604

Severity: INFO
Message: Statistics for records that have exceeded the entry limit:.

ID: 605

Severity: INFO
Message: File %s has %d such record(s) min=%d max=%d median=%d.

ID: 606

Severity: INFO
Message: Maximum number of entries referenced by any record is %d.

ID: 607

Severity: INFO
Message: Number of records referencing more than one entry: %d.

ID: 608

Severity: NOTICE
Message: The database backend %s containing %d entries has started.

ID: 609

Severity: NOTICE
Message: Some index keys have already exceeded the previous index entry limit in index %s. This index must be rebuilt before it can use the new limit.

ID: 610

Severity: NOTICE
Message: Exported %d entries and skipped %d in %d seconds (average rate %.1f/sec).

ID: 611

Severity: NOTICE
Message: Exported %d records and skipped %d (recent rate %.1f/sec).

ID: 612

Severity: NOTICE
Message: Flushing data to disk.

ID: 613

Severity: NOTICE
Message: Processed %d entries, imported %d, skipped %d and rejected %d in %d seconds (average rate %.1f/sec).

ID: 614

Severity: NOTICE
Message: Setting DB cache size to %d bytes and phase one buffer size to %d bytes.

ID: 615

Severity: NOTICE
Message: Index %s phase two processing completed.

ID: 616

Severity: NOTICE
Message: Index %s phase two started processing %d buffers in %d batches.

ID: 617

Severity: NOTICE
Message: Index %s %d%% complete: remaining = %d KB, rate = %d KB/s; batch %d/%d.

ID: 618

Severity: NOTICE
Message: Import LDIF environment close took %d seconds.

ID: 619

Severity: NOTICE
Message: The amount of free memory available to the import task is %d bytes. The number of phase one buffers required is %d buffers.

ID: 620

Severity: NOTICE
Message: Total import time was %d seconds. Phase one processing completed in %d seconds, phase two processing completed in %d seconds.

ID: 621

Severity: NOTICE
Message: Processed %d entries, skipped %d and rejected %d (recent rate %.1f/sec).

ID: 622

Severity: NOTICE
Message: %s starting import (build %s, R%s).

ID: 623

Severity: NOTICE
Message: Import Thread Count: %d threads.

ID: 624

Severity: NOTICE
Message: Due to changes in the configuration, index %s is currently operating in a degraded state and must be rebuilt before it can be used.

ID: 625

Severity: NOTICE
Message: Rebuild of all indexes started with %d total entries to process.

ID: 626

Severity: NOTICE
Message: Degraded state of index(es) %s has been cleared.

ID: 627

Severity: NOTICE
Message: Rebuild of all degraded indexes started with %d total entries to process.

ID: 628

Severity: NOTICE
Message: Rebuild complete. Processed %d entries in %d seconds (average rate %.1f/sec).

ID: 629

Severity: NOTICE
Message: %.1f%% Completed. Processed %d/%d entries. (recent rate %.1f/sec).

ID: 630

Severity: NOTICE
Message: Rebuild of index(es) %s started with %d total entries to process.

ID: 631

Severity: NOTICE
Message: A referral entry %s indicates that the operation must be processed at a different server.

ID: 632

Severity: NOTICE
Message: Checked %d records and found %d error(s) in %d seconds (average rate %.1f/sec).

ID: 633

Severity: NOTICE
Message: Checked %d entries and found %d error(s) in %d seconds (average rate %.1f/sec).

ID: 634

Severity: NOTICE
Message: Processed %d out of %d records and found %d error(s) (recent rate %.1f/sec).

ID: 635

Severity: WARNING
Message: The requested operation is not supported by this backend.

ID: 636

Severity: WARNING
Message: Unable to determine the total number of entries in the container: %s.

ID: 637

Severity: ERROR
Message: The database logging level string '%s' provided for configuration entry '%s' is invalid. The value must be one of OFF, SEVERE, WARNING, INFO, CONFIG, FINE, FINER, FINEST, or ALL. Note that these values are case sensitive.

ID: 638

Severity: ERROR
Message: Configuration attribute ds-cfg-db-cache-size has a value of %d which is less than the minimum: %d.

ID: 639

Severity: ERROR
Message: Missing ID %d%n%s.

ID: 640

Severity: ERROR
Message: Reference to unknown entry ID %s%n%s.

ID: 641

Severity: ERROR
Message: The entry with ID %s is associated with the wrong key%n%s.

ID: 642

Severity: ERROR
Message: Empty ID set: %n%s.

ID: 643

Severity: ERROR
Message: Duplicate reference to ID %d%n%s.

ID: 644

Severity: ERROR
Message: Reference to unknown ID %d%n%s.

ID: 645

Severity: ERROR
Message: Reference to entry <%s> which does not match the value%n%s.

ID: 646

Severity: ERROR
Message: File dn2id is missing key %s.

ID: 647

Severity: ERROR
Message: File dn2id has ID %d instead of %d for key %s.

ID: 648

Severity: ERROR
Message: File dn2id has DN <%s> referencing unknown ID %d.

ID: 649

Severity: ERROR
Message: File dn2id has DN <%s> referencing entry with wrong DN <%s>.

ID: 650

Severity: ERROR
Message: The stored entry count in id2entry (%d) does not agree with the actual number of entry records found (%d).

ID: 651

Severity: ERROR
Message: File id2childrenCount has wrong number of children for DN <%s> (got %d, expecting %d).

ID: 652

Severity: ERROR
Message: File id2ChildrenCount references non-existing EntryID <%d>.

ID: 653

Severity: NOTICE
Message: Rebuilding index finished: no indexes to rebuild.

ID: 654

Severity: NOTICE
Message: Setting DB cache size to %d MB. Using %d mb off-heap memory through %d phase one buffers of %d KB.

ID: 655

Severity: ERROR
Message: Ignoring schema definition '%s' because the following error occurred while it was being parsed: %s.

ID: 656

Severity: ERROR
Message: Schema definition could not be parsed as valid attribute value.

ID: 657

Severity: ERROR
Message: Attribute %s is set as confidential on a backend whose entries are still cleartext. Enable confidentiality on the backend first.

ID: 658

Severity: ERROR
Message: The attribute '%s' cannot enable confidentiality for keys and values at the same time.

ID: 659

Severity: ERROR
Message: Cannot encode entry for writing on storage: %s.

ID: 660

Severity: ERROR
Message: Input stream ended unexpectedly while decoding entry.

ID: 661

Severity: ERROR
Message: Confidentiality cannot be disabled on suffix '%s' because the following indexes have confidentiality still enabled: %s.

ID: 662

Severity: NOTICE
Message: Changing confidentiality for index '%s' requires the index to be rebuilt before it can be used again.

ID: 663

Severity: ERROR
Message: Error while enabling confidentiality with cipher %s, %d bits: %s.

ID: 664

Severity: ERROR
Message: The import has been aborted because the data to be imported contains duplicate copies of entry '%s'.

ID: 665

Severity: ERROR
Message: Proxy backend '%s' could not discover remote servers capabilities: %s.

ID: 666

Severity: INFO
Message: Proxy backend '%s' successfully configured failover via the service discovery mechanism '%s': primary servers are %s and secondary servers are %s.

ID: 667

Severity: WARNING
Message: Proxy backend '%s' cannot failover: only primary servers have been discovered via the service discovery mechanism '%s'. Primary servers are %s.

ID: 668

Severity: WARNING
Message: Proxy backend '%s' cannot failover: only secondary servers have been discovered via the service discovery mechanism '%s'. Secondary servers are %s.

ID: 669

Severity: ERROR
Message: Proxy backend '%s' is non functional because it could not find any primary nor secondary servers via the service discovery mechanism '%s'.

ID: 670

Severity: ERROR
Message: Proxy backend '%s' cannot find the configured service discovery mechanism '%s'.

ID: 671

Severity: NOTICE
Message: Connection options have changed for the proxy backend '%s'. The existing connections are being closed immediately. New ones are being opened.

ID: 672

Severity: NOTICE
Message: Connection pool options have changed for the proxy backend '%s'. The existing connections are being closed and re-opened.

ID: 673

Severity: NOTICE
Message: Service discovery mechanism has changed from '%s' to '%s' for proxy backend '%s'. The existing connections are being closed immediately.

ID: 674

Severity: NOTICE
Message: Remote servers changed for the proxy backend '%s'. The proxy was using: primary servers=%s, secondary servers=%s; and it will now be using: primary servers=%s, secondary servers=%s.

ID: 675

Severity: INFO
Message: Proxy backend '%s' automatically registered itself against the base DNs %s. It was previously registered against the base DNs %s.

ID: 676

Severity: ERROR
Message: No backend is associated with the base DN '%s'.

ID: 677

Severity: ERROR
Message: Proxy backend '%s' cannot register itself against base DN %s because this base DN is already registered against backend '%s'.

ID: 678

Severity: ERROR
Message: Proxy backend '%s' is being deregistered from base DN %s because local backend '%s' is registering against it. Local backends take precedence over proxy backends.

ID: 679

Severity: INFO
Message: The change to the LDIF backend visibility will not take effect until the backend is disabled and re-enabled.

ID: 680

Severity: INFO
Message: The primary servers for proxy backend '%s' are now available and will be used for proxying requests.

ID: 681

Severity: INFO
Message: The secondary servers for proxy backend '%s' are now available and will be used if the primary servers are unavailable.

ID: 682

Severity: WARNING
Message: The primary servers for proxy backend '%s' are unavailable. The secondary servers, if available, will be used for processing requests until the primary servers become available again. The last failure that prevented the primary servers from being used was: %s.

ID: 683

Severity: WARNING
Message: The secondary servers for proxy backend '%s' are unavailable. If the primary servers are unavailable, or become unavailable, then it will no longer be possible to proxy requests. The last failure that prevented the secondary servers from being used was: %s.

ID: 684

Severity: INFO
Message: The server '%s' for proxy backend '%s' is available and will be used for proxying requests.

ID: 685

Severity: WARNING
Message: The server '%s' for proxy backend '%s' is unavailable. The last failure that prevented the server from being used was: %s.

ID: 686

Severity: ERROR
Message: The partition base DN '%s' should be subordinate to one of the base DNs %s of proxy backend '%s'.

ID: 687

Severity: ERROR
Message: Backend database cache preload for backend '%s' is not supported in this release.

ID: 688

Severity: INFO
Message: Configuration of proxy backend '%s' with service discovery mechanism '%s' is in progress. Requests will not be proxied until configuration completes.

ID: 689

Severity: WARNING
Message: The server is performing an unindexed internal search request with base DN '%s', scope '%s', and filter '%s'. Unindexed internal searches are usually unexpected and could impact performance. Please verify that this backend’s indexes are configured correctly for these search parameters.

ID: 690

Severity: NOTICE
Message: Initial result code was '%s', with diagnostic message: %s.

ID: 691

Severity: ERROR
Message: There are insufficient resources to perform the operation.

ID: 692

Severity: ERROR
Message: The time-to-live (TTL) feature can only be enabled for generalized time ordering indexes.

ID: 693

Severity: ERROR
Message: An unexpected error occurred while purging expired entries: %s.

ID: 694

Severity: WARNING
Message: Unable to locate all expired entries on backend '%s' because the ttl-enabled index '%s' has reached the configured index-entry-limit.

ID: 695

Severity: ERROR
Message: The partition base DN '%s' shouldn’t be subordinate to one of the other partition base DNs %s of proxy backend '%s'.

ID: 696

Severity: WARNING
Message: The proxy backend '%s' will ignore the discovered servers '%s' from shard '%s' because they do not expose the required base DNs '%s'.

ID: 697

Severity: WARNING
Message: Property '%s' contains value '%s' which cannot be parsed as a long. Defaulting to '%s' bytes for small DB size.

ID: 698

Severity: ERROR
Message: An error occurred while trying to retrieve the key managers from the key manager provider %s.

ID: 699

Severity: ERROR
Message: Could not stop export-ldif threads after 30 seconds. Now forcing stop by interrupting them.

ID: 700

Severity: WARNING
Message: The file system used by '%s' backend does not support last file modification time. Backups will still work but will take longer and consume more space in the backup storage.

ID: 701

Severity: ERROR
Message: The index(es) cannot be rebuilt because the server failed to obtain a write lock for the entry '%s' after multiple attempts.

ID: 702

Severity: ERROR
Message: VLV index '%s' must be configured with at least one sort attribute.

ID: 703

Severity: ERROR
Message: Missing entry %s in index %s.

ID: 704

Severity: ERROR
Message: Big index for attribute '%s' cannot be created for matching rule '%s' because it is not an equality matching rule.

ID: 705

Severity: WARNING
Message: The subtree delete against '%s' is being performed non-atomically because it is deleting more than %s subordinate entries. To prevent inconsistency across replicas, the client must retry this same delete operation until it succeeds.

ID: 706

Severity: ERROR
Message: A Server Side Sort control must be specified whenever a Virtual List View control is present.

ID: 707

Severity: ERROR
Message: Counter of %s reports wrong number of entries for key <%s> (got %d, expecting %d).

ID: 708

Severity: ERROR
Message: An error occurred while attempting to send an email for the completion of %s task: Task ID: %s, Task State: %s, Scheduled Start Time: %s, Actual Start Time: %s, Completion Time: %s. The error was: %s.

ID: 709

Severity: ERROR
Message: Index for attribute '%s' cannot be created because the configuration contains an included attribute value '%s' which appears to be invalid according to the schema: %s.

ID: 710

Severity: ERROR
Message: The VLV request cannot be processed because the search is not indexed. Configure a VLV index matching the request.

ID: 711

Severity: NOTICE
Message: Both equality and presence index types are defined for attribute '%s'. When no presence index exists, presence search filters are processed using the equality index. Therefore, consider deleting the presence index for attribute '%s'.

ID: 712

Severity: ERROR
Message: An internal error occurred when accessing backend '%s': %s.

ID: 713

Severity: ERROR
Message: An internal error was detected when accessing backend '%s'.

ID: 714

Severity: NOTICE
Message: Starting backup for backend '%s'.

ID: 715

Severity: NOTICE
Message: Starting restore for backend '%s' with backup ID '%s'.

ID: 716

Severity: NOTICE
Message: Backup completed for backend '%s' with backup ID '%s'.

ID: 717

Severity: NOTICE
Message: Restore completed for backend '%s' with backup ID '%s'.

ID: 718

Severity: NOTICE
Message: An error occurred while attempting to backup backend '%s': %s.

ID: 719

Severity: NOTICE
Message: The backup process failed with one or more errors.

ID: 720

Severity: NOTICE
Message: The restore process failed with one or more errors.

ID: 721

Severity: NOTICE
Message: An error occurred while attempting to restore backend '%s' with backup ID '%s': %s.

ID: 722

Severity: NOTICE
Message: There are no enabled backends that support backup operation.

ID: 723

Severity: NOTICE
Message: The backup command was interrupted.

ID: 724

Severity: NOTICE
Message: Cannot read backup directory content: %s.

ID: 725

Severity: NOTICE
Message: Backup still in progress, new files have been created.

ID: 726

Severity: NOTICE
Message: Backing up file (%d/%d) '%s'.

ID: 727

Severity: NOTICE
Message: Verifying file (%d/%d) '%s'.

ID: 728

Severity: NOTICE
Message: Restoring file (%d/%d) '%s'.

ID: 729

Severity: NOTICE
Message: Purging backup (%d/%d) '%s'.

ID: 730

Severity: NOTICE
Message: The following backends do not exist or are disabled: %s. Here is the list of enabled backends that support backups: %s.

ID: 731

Severity: NOTICE
Message: The following backends do not support backups: %s. Here is the list of enabled backends that support backups: %s.

ID: 732

Severity: NOTICE
Message: The backends %s cannot be restored because they do not exist or are disabled.

ID: 733

Severity: NOTICE
Message: Cannot find backup with ID %s.

ID: 734

Severity: NOTICE
Message: There are no backups for backends %s.

ID: 735

Severity: NOTICE
Message: The backends %s cannot be restored while the server is running. Please stop the server first and try again with the --offline option.

ID: 736

Severity: NOTICE
Message: '%s' is not a valid name for a directory.

ID: 737

Severity: NOTICE
Message: Found backup IDs that correspond to the same backend name: %s. Make sure each backup ID corresponds to a distinct backend.

ID: 738

Severity: NOTICE
Message: Either the --%s or --%s argument must be provided.

ID: 739

Severity: NOTICE
Message: Cannot delete corrupted file '%s'.

ID: 740

Severity: NOTICE
Message: Deleting corrupted file from backend directory.

ID: 741

Severity: NOTICE
Message: Deleting corrupted file from backup storage.

ID: 742

Severity: NOTICE
Message: signature does not match.

ID: 743

Severity: NOTICE
Message: unexpected content.

ID: 744

Severity: NOTICE
Message: Problem with file '%s' : %s.

ID: 745

Severity: NOTICE
Message: IO error: %s.

ID: 746

Severity: NOTICE
Message: Operation was interrupted.

ID: 747

Severity: NOTICE
Message: File '%s' is corrupted: %s.

ID: 748

Severity: NOTICE
Message: File '%s' is missing.

ID: 749

Severity: NOTICE
Message: The directory does not exist.

ID: 750

Severity: NOTICE
Message: Not a directory.

ID: 751

Severity: NOTICE
Message: Cannot read backend files in directory '%s': %s.

ID: 752

Severity: NOTICE
Message: Cannot delete backend files from directory '%s': %s.

ID: 753

Severity: NOTICE
Message: The '%s' backend files have been removed after restore failed. The backend is now empty.

ID: 754

Severity: NOTICE
Message: Cannot create the backend directory '%s' before restoring: %s.

ID: 755

Severity: NOTICE
Message: The attempt to remove backend files from directory '%s' has failed, backend '%s' may contain corrupted data, please remove the files manually.

ID: 756

Severity: NOTICE
Message: The backup ID '%s' already exists.

ID: 757

Severity: NOTICE
Message: Cannot compute the fingerprint for backend file '%s': %s.

ID: 758

Severity: NOTICE
Message: Unable to access the backup storage: %s.

ID: 759

Severity: NOTICE
Message: No plugin found to handle the storage scheme '%s'.

ID: 760

Severity: NOTICE
Message: Cannot delete the backup lock file '%s', please remove this file manually: %s.

ID: 761

Severity: NOTICE
Message: Cannot acquire a shared lock for backend '%s': %s. This generally means that some other process has exclusive access to this backend (e.g., a restore or an LDIF import).

ID: 762

Severity: NOTICE
Message: Cannot release the shared lock for backend '%s': %s. This lock should automatically be cleared when the backup process exits, so no further action should be required.

ID: 763

Severity: NOTICE
Message: Cannot acquire an exclusive lock for backend '%s': %s. This generally means some other process is still using this backend (e.g., it is in use by the Directory Server or a backup or LDIF export is in progress).

ID: 764

Severity: NOTICE
Message: Cannot release the exclusive lock for backend '%s': %s. This lock should automatically be cleared when the restore process exits, so no further action should be required.

ID: 765

Severity: NOTICE
Message: Cannot enable backend '%s' after restoring: %s.

ID: 766

Severity: NOTICE
Message: Backup ID: %s.

ID: 767

Severity: NOTICE
Message: Backup Date: %s.

ID: 768

Severity: NOTICE
Message: Backend name: %s.

ID: 769

Severity: NOTICE
Message: Server ID: %s.

ID: 770

Severity: NOTICE
Message: Status: %s.

ID: 771

Severity: NOTICE
Message: Error: %s.

ID: 772

Severity: NOTICE
Message: Verified.

ID: 773

Severity: NOTICE
Message: Bad.

ID: 774

Severity: NOTICE
Message: Found %s backup(s) with the requested characteristics.

ID: 775

Severity: NOTICE
Message: There are no backups with the requested characteristics.

ID: 776

Severity: NOTICE
Message: %s backup(s) cannot be restored.

ID: 777

Severity: NOTICE
Message: Found %s backup(s) that cannot be fully identified due to the following error(s):.

ID: 778

Severity: NOTICE
Message: Backup and restore backends, manage backup files.

ID: 779

Severity: NOTICE
Message: Backup and restore backends.

ID: 780

Severity: NOTICE
Message: {backup location}.

ID: 781

Severity: NOTICE
Message: Indicates that the command will operate independently of the server process. It will run regardless of whether the server is started or stopped. When using this option with the %1$s sub-command, the server must be stopped; also as the command will write to server files, you should run the command as a user having the same filesystem permissions as the user running the server. Using this option with the %2$s sub-command when the server is running is possible and supported. With JE Backends, the integrity of the backup is ensured by the process. With LDIF backends, avoid simultaneous changes to the backends.

ID: 782

Severity: NOTICE
Message: Backup file-system path or URI for alternative storage mechanisms. File-system paths may be expressed as absolute or relative paths and are resolved relative to the current working directory when the tool is run in offline mode, or relative to the server instance directory when the tool is run in task mode. Read the documentation for further information regarding alternative backup storage mechanisms.

ID: 783

Severity: NOTICE
Message: Location containing backups: file-system path or URI for alternative storage mechanisms. File-system paths may be expressed as absolute or relative paths and are resolved relative to the current working directory when the tool is run in offline mode, or relative to the server instance directory when the tool is run in task mode. Read the documentation for further information regarding alternative backup storage mechanisms.

ID: 784

Severity: NOTICE
Message: {PROP:VALUE}.

ID: 785

Severity: NOTICE
Message: Assigns a value to a storage property where PROP is the name of the property and VALUE is the single value to be assigned. Specify the same property multiple times in order to assign more than one value to it.

ID: 786

Severity: NOTICE
Message: List the backups at the specified location.

ID: 787

Severity: NOTICE
Message: Show only backups taken from the provided backend.

ID: 788

Severity: NOTICE
Message: Show only backups taken from the provided server.

ID: 789

Severity: NOTICE
Message: {server ID}.

ID: 790

Severity: NOTICE
Message: Show only the last backup for each backend.

ID: 791

Severity: NOTICE
Message: Verify backups completeness, integrity and whether they can be decrypted.

ID: 792

Severity: NOTICE
Message: Take encrypted and signed backups of individual backends and send them to the desired location.

ID: 793

Severity: NOTICE
Message: The name of the backend to back up. Specify this option multiple times to backup multiple backends or skip this option to backup all the enabled backends that support backups.

ID: 794

Severity: NOTICE
Message: {backup ID}.

ID: 795

Severity: NOTICE
Message: Restore one or more backends. In order to decrypt and verify signatures on backup files, the server must have access to the master key pair used to encrypt and sign the files when they were created.

ID: 796

Severity: NOTICE
Message: Restore the backup having the provided ID. Specify this option multiple times to restore multiple backends.

ID: 797

Severity: NOTICE
Message: Restore the last backup of the provided backend. Specify this option multiple times to restore multiple backends.

ID: 798

Severity: NOTICE
Message: Delete one or more backups.

ID: 799

Severity: NOTICE
Message: The ID of the backup that should be deleted. Specify this option multiple times to purge multiple backups.

ID: 800

Severity: NOTICE
Message: At least one of these options must be declared: %s.

ID: 801

Severity: NOTICE
Message: The option '--%s' can only be used with the option '--%s'.

ID: 802

Severity: NOTICE
Message: {number of backups}.

ID: 803

Severity: NOTICE
Message: The number of backups to keep per backend. Use this option to keep the n latest backups of each backend and delete the others. If n=0, all the backups will be removed.

ID: 804

Severity: NOTICE
Message: {duration}.

ID: 805

Severity: NOTICE
Message: Delete backups that are older than the provided duration. The latest backup of each backend will always be kept unless the '--%s' option is also provided. Duration examples: '12 hours', '3 days', '1y'.

ID: 806

Severity: NOTICE
Message: Must be used with the '--%s' option, indicates that the last backup of each backend can be deleted if older than the provided duration.

ID: 807

Severity: NOTICE
Message: {backend name}.

ID: 808

Severity: NOTICE
Message: Purge only backups of the specified backend. Specify this option multiple times to allow purging backups of different backends. Skip this option to allow purging backups of all backends. This can only be used with options '--%s' or '--%s'.

ID: 809

Severity: NOTICE
Message: '%d' is not allowed: the value must be equal or greater than 0.

ID: 810

Severity: NOTICE
Message: Invalid value for '%s': %s.

ID: 811

Severity: NOTICE
Message: An error occurred while attempting to purge the backup '%s': %s.

ID: 812

Severity: NOTICE
Message: An error occurred while attempting to purge backup files starting with '%s': %s.

ID: 813

Severity: NOTICE
Message: Backup purge process failed with one or more errors.

ID: 814

Severity: NOTICE
Message: Purge completed successfully.

ID: 815

Severity: NOTICE
Message: The storage property '%s' has several values while it can have only one. The provided properties string was: "%s".

ID: 816

Severity: ERROR
Message: Backup id '%s' is invalid: expected to find an underscore in it.

ID: 817

Severity: ERROR
Message: Backup id '%s' is invalid: cannot parse '%s' as a timestamp.

ID: 818

Severity: NOTICE
Message: Access denied to file '%s'.

ID: 819

Severity: ERROR
Message: Credential file '%s' not found.

ID: 820

Severity: ERROR
Message: Failed to parse the credential file '%s'.

ID: 821

Severity: ERROR
Message: Invalid plugin type '%s', a backup plugin must be of type '%s'.

ID: 822

Severity: ERROR
Message: A problem occurred while connecting to cloud provider '%s' using the provided credentials: %s.

ID: 823

Severity: ERROR
Message: No value found for property '%s'.

ID: 824

Severity: ERROR
Message: No environment value '%s' found for property '%s'. If you are running the tool in offline mode, make sure the command has access to this variable, or else make sure the directory server has access to it.

ID: 825

Severity: ERROR
Message: Could not find file '%s' in cloud bucket '%s'.

ID: 826

Severity: ERROR
Message: An error occurred while uploading the file to the cloud storage: the host '%s' is an unknown host.

ID: 827

Severity: ERROR
Message: An error occurred while uploading the file to the cloud storage. The cloud provider returned the following error message: '%s'.

ID: 828

Severity: ERROR
Message: Unable to set the value for Boolean configuration attribute %s because the provided value %s was not either 'true' or 'false'.

ID: 829

Severity: ERROR
Message: Unable to set the value for integer configuration attribute %s because the provided value %s cannot be interpreted as an integer value: %s.

ID: 830

Severity: ERROR
Message: Unable to set the value for configuration attribute %s because the provided value %d is less than the lowest allowed value of %d.

ID: 831

Severity: ERROR
Message: Unable to set the value for configuration attribute %s because the provided value %d is greater than the largest allowed value of %d.

ID: 832

Severity: ERROR
Message: The specified configuration file %s does not exist or is not readable.

ID: 833

Severity: ERROR
Message: An error occurred while attempting to open the configuration file %s for reading: %s.

ID: 834

Severity: ERROR
Message: The first entry read from LDIF configuration file %s had a DN of "%s" rather than the expected "%s" which should be used as the Directory Server configuration root.

ID: 835

Severity: ERROR
Message: An unexpected error occurred while attempting to process the Directory Server configuration file %s: %s.

ID: 836

Severity: ERROR
Message: Unable to determine the Directory Server instance root from either an environment variable or based on the location of the configuration file. Please set an environment variable named %s with a value containing the absolute path to the server installation root.

ID: 837

Severity: ERROR
Message: An unexpected error occurred while trying to write configuration entry %s to LDIF: %s.

ID: 838

Severity: ERROR
Message: The Directory Server configuration may not be altered by importing a new configuration from LDIF.

ID: 839

Severity: WARNING
Message: There are no active access loggers defined in the Directory Server configuration. No access logging will be performed.

ID: 840

Severity: WARNING
Message: There are no active error loggers defined in the Directory Server configuration. No error logging will be performed.

ID: 841

Severity: ERROR
Message: An error occurred while attempting to create a Directory Server logger from the information in configuration entry %s: %s.

ID: 842

Severity: ERROR
Message: Configuration entry %s does not contain a valid objectclass for a Directory Server access, error, or debug logger definition.

ID: 843

Severity: ERROR
Message: Class %s specified in attribute ds-cfg-java-class of configuration entry %s cannot be instantiated as a Directory Server access logger: %s.

ID: 844

Severity: ERROR
Message: Class %s specified in attribute ds-cfg-java-class of configuration entry %s cannot be instantiated as a Directory Server error logger: %s.

ID: 845

Severity: ERROR
Message: Class %s specified in attribute ds-cfg-java-class of configuration entry %s cannot be instantiated as a Directory Server debug logger: %s.

ID: 846

Severity: ERROR
Message: Configuration entry %s does not contain attribute %s (or that attribute exists but is not accessible using JMX).

ID: 847

Severity: ERROR
Message: There is no method %s for any invokable component registered with configuration entry %s.

ID: 848

Severity: ERROR
Message: The Directory Server could not register a JMX MBean for the component associated with configuration entry %s: %s.

ID: 849

Severity: ERROR
Message: An unexpected error occurred while trying to export the Directory Server configuration to LDIF: %s.

ID: 850

Severity: ERROR
Message: Worker thread "%s" has experienced too many repeated failures while attempting to retrieve the next operation from the work queue (%d failures experienced, maximum of %d failures allowed). This worker thread will be destroyed.

ID: 851

Severity: ERROR
Message: An unexpected error occurred while trying to register the configuration handler base DN "%s" as a private suffix with the Directory Server: %s.

ID: 852

Severity: ERROR
Message: The entry cn=Backends,cn=config does not appear to exist in the Directory Server configuration. This is a required entry.

ID: 853

Severity: INFO
Message: The backend defined in configuration entry %s is marked as disabled and therefore will not be used.

ID: 854

Severity: ERROR
Message: An unexpected error occurred while attempting to determine whether the backend associated with configuration entry %s should be enabled or disabled: %s. It will be disabled.

ID: 855

Severity: ERROR
Message: The Directory Server was unable to load class %s and use it to create a backend instance as defined in configuration entry %s. The error that occurred was: %s. This backend will be disabled.

ID: 856

Severity: ERROR
Message: An error occurred while trying to initialize a backend loaded from class %s with the information in configuration entry %s: %s. This backend will be disabled.

ID: 857

Severity: NOTICE
Message: The requested change to configuration entry %s would cause the class for the associated backend to change from %s to %s. This change will not take effect until the backend is disabled and re-enabled, or until the Directory Server is restarted.

ID: 858

Severity: ERROR
Message: An error occurred while trying to initialize a connection handler loaded from class %s with the information in configuration entry %s: %s. This connection handler will be disabled.

ID: 859

Severity: ERROR
Message: Unable to read the Directory Server schema definitions because the schema directory %s does not exist.

ID: 860

Severity: ERROR
Message: Unable to read the Directory Server schema definitions because the schema directory %s exists but is not a directory.

ID: 861

Severity: ERROR
Message: Unable to read the Directory Server schema definitions from directory %s because an unexpected error occurred while trying to list the files in that directory: %s.

ID: 862

Severity: WARNING
Message: Schema configuration file %s in directory %s cannot be parsed because an unexpected error occurred while trying to open the file for reading: %s.

ID: 863

Severity: WARNING
Message: Schema configuration file %s in directory %s cannot be parsed because an unexpected error occurred while trying to read its contents as an LDIF entry: %s.

ID: 864

Severity: ERROR
Message: An unexpected error occurred that prevented the server from installing its default entry cache framework: %s.

ID: 865

Severity: WARNING
Message: The entry cache configuration entry "cn=Entry Caches,cn=config" does not exist in the Directory Server configuration. No entry cache will be available until this entry is created with a valid entry cache configuration.

ID: 866

Severity: ERROR
Message: An error occurred while attempting to initialize an instance of class %s for use as the Directory Server entry cache: %s. As a result, the entry cache will be disabled.

ID: 867

Severity: ERROR
Message: The configuration for the entry cache defined in configuration entry %s was not acceptable: %s.

ID: 868

Severity: ERROR
Message: The configuration for the entry cache defined in configuration entry %s was not acceptable: the entry cache level %d is already in use.

ID: 869

Severity: ERROR
Message: An error occurred while attempting to initialize an instance of class %s as a Directory Server plugin using the information in configuration entry %s: %s. This plugin will be disabled.

ID: 870

Severity: ERROR
Message: Class %s specified in configuration entry %s does not contain a valid extended operation handler implementation: %s.

ID: 871

Severity: ERROR
Message: An error occurred while trying to initialize an instance of class %s as an extended operation handler as defined in configuration entry %s: %s.

ID: 872

Severity: ERROR
Message: An error occurred while trying to initialize an instance of class %s as a SASL mechanism handler as defined in configuration entry %s: %s.

ID: 873

Severity: ERROR
Message: Entry %s cannot be removed from the Directory Server configuration because that DN does not have a parent.

ID: 874

Severity: ERROR
Message: Entry %s cannot be added to the Directory Server configuration because another configuration entry already exists with that DN.

ID: 875

Severity: ERROR
Message: Entry %s cannot be added to the Directory Server configuration because that DN does not have a parent.

ID: 876

Severity: ERROR
Message: Entry %s cannot be added to the Directory Server configuration because its parent entry %s does not exist.

ID: 877

Severity: ERROR
Message: The Directory Server is unwilling to add configuration entry %s because one of the add listeners registered with the parent entry %s rejected this change with the message: %s.

ID: 878

Severity: ERROR
Message: An unexpected error occurred while attempting to add configuration entry %s as a child of entry %s: %s.

ID: 879

Severity: ERROR
Message: Entry %s cannot be removed from the Directory Server configuration because the specified entry does not exist.

ID: 880

Severity: ERROR
Message: Entry %s cannot be removed from the Directory Server configuration because the specified entry has one or more subordinate entries.

ID: 881

Severity: ERROR
Message: Entry %s cannot be removed from the Directory Server configuration because the entry does not have a parent and removing the configuration root entry is not allowed.

ID: 882

Severity: ERROR
Message: Entry %s cannot be removed from the Directory Server configuration because one of the delete listeners registered with the parent entry %s rejected this change with the message: %s.

ID: 883

Severity: ERROR
Message: An unexpected error occurred while attempting to remove configuration entry %s as a child of entry %s: %s.

ID: 884

Severity: ERROR
Message: Entry %s cannot be modified because the specified entry does not exist.

ID: 885

Severity: ERROR
Message: Entry %s cannot be modified because one of the configuration change listeners registered for that entry rejected the change: %s.

ID: 886

Severity: ERROR
Message: An unexpected error occurred while attempting to modify configuration entry %s as a child of entry %s: %s.

ID: 887

Severity: ERROR
Message: An error occurred while attempting to export the new Directory Server configuration to file %s: %s.

ID: 888

Severity: ERROR
Message: An error occurred while attempting to rename the new Directory Server configuration from file %s to %s: %s.

ID: 889

Severity: ERROR
Message: Modify DN operations are not allowed in the Directory Server configuration.

ID: 890

Severity: ERROR
Message: An error occurred while trying to initialize an instance of class %s as a password storage scheme as defined in configuration entry %s: %s.

ID: 891

Severity: ERROR
Message: Unable to add a new password storage scheme entry with DN %s because there is already a storage scheme registered with that DN.

ID: 892

Severity: WARNING
Message: The backend defined in configuration entry %s has a backend ID of %s that conflicts with the backend ID for another backend in the server. The backend will be disabled.

ID: 893

Severity: ERROR
Message: The Directory Server was unable to acquire a shared lock for backend %s: %s. This generally means that the backend is in use by a process that requires an exclusive lock (e.g., importing from LDIF or restoring a backup). This backend will be disabled.

ID: 894

Severity: WARNING
Message: An error occurred while attempting to release a shared lock for backend %s: %s. This may interfere with operations that require exclusive access, including LDIF import and restoring a backup.

ID: 895

Severity: ERROR
Message: An error occurred while trying to initialize an instance of class %s as an identity mapper as defined in configuration entry %s: %s.

ID: 896

Severity: ERROR
Message: An error occurred while attempting to instantiate class %s referenced in synchronization provider configuration entry %s: %s.

ID: 897

Severity: ERROR
Message: An error occurred while attempting to initialize the Directory Server synchronization provider referenced in configuration entry %s: %s.

ID: 898

Severity: ERROR
Message: An error occurred while trying to initialize an instance of class %s as a password validator as defined in configuration entry %s: %s.

ID: 899

Severity: ERROR
Message: An error occurred while trying to initialize an instance of class %s as a password generator as defined in configuration entry %s: %s.

ID: 900

Severity: ERROR
Message: No password policies have been defined below the cn=Password Policies,cn=config entry in the Directory Server configuration. At least one password policy configuration must be defined.

ID: 901

Severity: ERROR
Message: The password policy defined in configuration entry %s is invalid: %s.

ID: 902

Severity: ERROR
Message: The Directory Server default password policy is defined as %s, but that entry does not exist or is not below the password policy configuration base cn=Password Policies,cn=config.

ID: 903

Severity: WARNING
Message: The specified entry %s is currently defined as the configuration entry for the default password policy. The default password policy configuration entry may not be removed.

ID: 904

Severity: INFO
Message: Password policy entry %s has been removed from the Directory Server configuration. Any user entries that explicitly reference this password policy will no longer be allowed to authenticate.

ID: 905

Severity: WARNING
Message: Access control has been disabled.

ID: 906

Severity: NOTICE
Message: Access control has been enabled and will use the %s implementation.

ID: 907

Severity: ERROR
Message: An error occurred while attempting to instantiate class %s referenced in the access control configuration entry %s: %s.

ID: 908

Severity: ERROR
Message: An error occurred while trying to initialize an instance of class %s as an account status notification handler as defined in configuration entry %s: %s.

ID: 909

Severity: ERROR
Message: Unable to add a new account status notification handler entry with DN %s because there is already a notification handler registered with that DN.

ID: 910

Severity: ERROR
Message: An error occurred while attempting to apply the changes contained in file %s to the server configuration at startup: %s.

ID: 911

Severity: ERROR
Message: One or more errors occurred while applying changes on server startup: %s.

ID: 912

Severity: ERROR
Message: Configuration entry %s does not contain a valid value for configuration attribute ds-cfg-db-directory-permissions (It should be an UNIX permission mode in three-digit octal notation.).

ID: 913

Severity: ERROR
Message: Invalid UNIX file permissions %s does not allow read and write access to the backend database directory by the backend.

ID: 914

Severity: ERROR
Message: No default password policy is configured for the Directory Server. The default password policy must be specified by the ds-cfg-default-password-policy attribute in the cn=config entry.

ID: 915

Severity: WARNING
Message: An error occurred while attempting to register backend %s with the Directory Server: %s.

ID: 916

Severity: ERROR
Message: An error occurred while trying to create the configuration archive directory %s: %s.

ID: 917

Severity: ERROR
Message: An error occurred while trying to write the current configuration to the configuration archive: %s.

ID: 918

Severity: ERROR
Message: You do not have sufficient privileges to perform add operations in the Directory Server configuration.

ID: 919

Severity: ERROR
Message: You do not have sufficient privileges to perform delete operations in the Directory Server configuration.

ID: 920

Severity: ERROR
Message: You do not have sufficient privileges to perform modify operations in the Directory Server configuration.

ID: 921

Severity: ERROR
Message: You do not have sufficient privileges to perform modify DN operations in the Directory Server configuration.

ID: 922

Severity: ERROR
Message: You do not have sufficient privileges to perform search operations in the Directory Server configuration.

ID: 923

Severity: ERROR
Message: You do not have sufficient privileges to change the set of default root privileges.

ID: 924

Severity: ERROR
Message: An error occurred while trying to initialize an instance of class %s as a certificate mapper as defined in configuration entry %s: %s.

ID: 925

Severity: ERROR
Message: An error occurred while trying to initialize an instance of class %s as a key manager provider as defined in configuration entry %s: %s.

ID: 926

Severity: ERROR
Message: An error occurred while trying to initialize an instance of class %s as a trust manager provider as defined in configuration entry %s: %s.

ID: 927

Severity: ERROR
Message: Unable to retrieve JMX attribute %s associated with configuration entry %s: %s.

ID: 928

Severity: ERROR
Message: %s.%s returned a result of null for entry %s.

ID: 929

Severity: ERROR
Message: %s.%s failed for entry %s: result code=%s, admin action required=%b, messages="%s".

ID: 930

Severity: WARNING
Message: %s.%s indicated that administrative action is required for entry %s: messages="%s".

ID: 931

Severity: INFO
Message: %s.%s succeeded but generated the following messages for entry %s: %s.

ID: 932

Severity: ERROR
Message: Unable to parse value "%s" from config entry "%s" as a valid search filter: %s.

ID: 933

Severity: ERROR
Message: An error occurred while trying to load an instance of class %s referenced in configuration entry %s as a virtual attribute provider: %s.

ID: 934

Severity: ERROR
Message: The virtual attribute configuration in entry "%s" is not valid because attribute type %s is single-valued but provider %s may generate multiple values.

ID: 935

Severity: ERROR
Message: The virtual attribute configuration in entry "%s" is not valid because attribute type %s is single-valued but the conflict behavior is configured to merge real and virtual values.

ID: 936

Severity: ERROR
Message: Configuration entry %s cannot be modified because the change would alter its structural object class.

ID: 937

Severity: ERROR
Message: An error occurred while attempting to calculate a SHA-1 digest of file %s: %s.

ID: 938

Severity: WARNING
Message: The Directory Server has detected that one or more external changes have been made to the configuration file %s while the server was online, but another change has caused the server configuration to be overwritten. The manual changes have not been applied, but they have been preserved in file %s.

ID: 939

Severity: ERROR
Message: The Directory Server encountered an error while attempting to determine whether the configuration file %s has been externally edited with the server online, and/or trying to preserve such changes: %s. Any manual changes made to that file may have been lost.

ID: 940

Severity: ERROR
Message: Class %s specified in attribute ds-cfg-java-class of configuration entry %s cannot be instantiated as a Directory Server log rotation policy: %s.

ID: 941

Severity: ERROR
Message: Class %s specified in attribute ds-cfg-java-class of configuration entry %s cannot be instantiated as a Directory Server log retention policy: %s.

ID: 942

Severity: ERROR
Message: An error occurred while attempting to create a Directory Server log rotation policy from the information in configuration entry %s: %s.

ID: 943

Severity: ERROR
Message: An error occurred while attempting to create a Directory Server log retention policy from the information in configuration entry %s: %s.

ID: 944

Severity: ERROR
Message: An error occurred while attempting to create a text writer for a Directory Server logger from the information in configuration entry %s: %s.

ID: 945

Severity: WARNING
Message: Schema configuration file %s in directory %s contains more than one entry. Only the first entry will be examined, and the additional entries will be ignored.

ID: 946

Severity: WARNING
Message: The plugin order definition for plugins of type %s contains an empty element. This may cause the plugin order to be evaluated incorrectly.

ID: 947

Severity: WARNING
Message: The plugin order definition for plugins of type %s contains multiple wildcard characters. All plugin definitions should contain exactly one wildcard element to indicate where unmatched plugins should be included in the order, and including multiple wildcards may cause the plugin order to be evaluated incorrectly.

ID: 948

Severity: WARNING
Message: The plugin order definition for plugins of type %s includes multiple references to the '%s' plugin. This may cause the plugin order to be evaluated incorrectly.

ID: 949

Severity: WARNING
Message: The plugin order definition for plugins of type %s does not include a wildcard element to indicate where unmatched plugins should be included in the order. The server will default to invoking all unnamed plugins after set of named plugins.

ID: 950

Severity: ERROR
Message: Unable to initialize an instance of class %s as a work queue as specified in configuration entry %s: %s.

ID: 951

Severity: INFO
Message: The class used to provide the Directory Server work queue implementation has been changed from %s to %s, but this change will not take effect until the server is restarted.

ID: 952

Severity: ERROR
Message: The attempt to apply the configuration add failed. The preliminary checks were all successful and the entry was added to the server configuration, but at least one of the configuration add listeners reported an error when attempting to apply the change: %s.

ID: 953

Severity: ERROR
Message: The attempt to apply the configuration delete failed. The preliminary checks were all successful and the entry was removed from the server configuration, but at least one of the configuration delete listeners reported an error when attempting to apply the change: %s.

ID: 954

Severity: ERROR
Message: The attempt to apply the configuration modification failed. The preliminary checks were all successful and the modified entry was written to the server configuration, but at least one of the configuration change listeners reported an error when attempting to apply the change: %s.

ID: 955

Severity: ERROR
Message: The configuration for the key manager provider defined in configuration entry %s was not acceptable: %s.

ID: 956

Severity: ERROR
Message: The configuration for the trust manager provider defined in configuration entry %s was not acceptable: %s.

ID: 957

Severity: ERROR
Message: The configuration for the trust manager provider defined in configuration entry %s was not acceptable: %s.

ID: 958

Severity: ERROR
Message: The configuration for the account status notification handler defined in configuration entry %s was not acceptable: %s.

ID: 959

Severity: ERROR
Message: The configuration for the certificate mapper defined in configuration entry %s was not acceptable: %s.

ID: 960

Severity: ERROR
Message: The configuration for the identity mapper defined in configuration entry %s was not acceptable: %s.

ID: 961

Severity: ERROR
Message: The configuration for the password generator defined in configuration entry %s was not acceptable: %s.

ID: 962

Severity: ERROR
Message: The configuration for the password storage scheme defined in configuration entry %s was not acceptable: %s.

ID: 963

Severity: ERROR
Message: The configuration for the password validator defined in configuration entry %s was not acceptable: %s.

ID: 964

Severity: ERROR
Message: The configuration for the plugin defined in configuration entry %s was not acceptable: %s.

ID: 965

Severity: ERROR
Message: The configuration for the SASL mechanism handler defined in configuration entry %s was not acceptable: %s.

ID: 966

Severity: ERROR
Message: The configuration for the virtual attribute provider defined in configuration entry %s was not acceptable: %s.

ID: 967

Severity: ERROR
Message: The configuration for the alert handler defined in configuration entry %s was not acceptable: %s.

ID: 968

Severity: ERROR
Message: An error occurred while trying to initialize an instance of class %s as an alert handler as defined in configuration entry %s: %s.

ID: 969

Severity: ERROR
Message: An error occurred while attempting to open the current configuration file %s for reading in order to copy it to the ".startok" file: %s.

ID: 970

Severity: ERROR
Message: An error occurred while attempting to copy the current configuration from file %s into temporary file %s for use as the ".startok" configuration file: %s.

ID: 971

Severity: ERROR
Message: An error occurred while attempting to rename file %s to %s for use as the ".startok" configuration file: %s.

ID: 972

Severity: NOTICE
Message: The Directory Server is starting using the last known good configuration file %s rather than the active configuration file %s.

ID: 973

Severity: WARNING
Message: No last known good configuration file %s exists. The server will attempt to start using the active configuration file %s.

ID: 974

Severity: ERROR
Message: An error occurred while trying to parse and validate Berkeley DB JE property %s: %s.

ID: 975

Severity: ERROR
Message: An error occurred while trying to parse and validate Berkeley DB JE property %s: the property does not follow a singular property=value form.

ID: 976

Severity: ERROR
Message: An error occurred while trying to parse and validate Berkeley DB JE property %s: the property shadows configuration attribute %s.

ID: 977

Severity: ERROR
Message: An error occurred while trying to parse and validate Berkeley DB JE property %s: the property is already defined for this component.

ID: 978

Severity: ERROR
Message: An error occurred while attempting to open the configured log file %s for logger %s: %s.

ID: 979

Severity: ERROR
Message: Invalid UNIX file permissions %s does not allow write access to the log file by the log publisher.

ID: 980

Severity: ERROR
Message: Invalid UNIX file permissions %s: %s.

ID: 981

Severity: ERROR
Message: The configuration entry '%s' is currently defined to be the default password policy, however it is not a password policy.

ID: 982

Severity: ERROR
Message: The default password policy value '%s' is invalid because it refers to an authentication policy which is not a password policy.

ID: 983

Severity: ERROR
Message: The timestamp format string "%s" is not a valid format string. The format string should conform to the syntax described in the documentation for the "java.text.SimpleDateFormat" class.

ID: 984

Severity: ERROR
Message: The access log filtering criteria defined in "%s" could not be parsed because it contains an invalid user DN pattern "%s".

ID: 985

Severity: ERROR
Message: The access log filtering criteria defined in "%s" could not be parsed because it contains an invalid target DN pattern "%s".

ID: 986

Severity: WARNING
Message: There are no active HTTP access loggers defined in the Directory Server configuration. No HTTP access logging will be performed.

ID: 987

Severity: ERROR
Message: Class %s specified in attribute ds-cfg-java-class of configuration entry %s cannot be instantiated as a Directory Server HTTP access logger: %s.

ID: 988

Severity: WARNING
Message: The log format for %s contains the following unsupported fields: %s. Their output will be replaced with a dash ("-") character.

ID: 989

Severity: ERROR
Message: An error occurred while attempting to update a Directory Server logger from the information in configuration entry %s: %s.

ID: 990

Severity: ERROR
Message: Cannot configure java.util.logging root logger level: %s. java.util.logging support is now disabled.

ID: 991

Severity: ERROR
Message: An error occurred while trying to initialize an instance of class %s as an HTTP endpoint as defined in configuration entry %s: %s.

ID: 992

Severity: ERROR
Message: An error occurred while starting the HTTP endpoint as defined in configuration entry %s: %s.

ID: 993

Severity: ERROR
Message: The HTTP endpoint configuration defined in %s is invalid: %s.

ID: 994

Severity: ERROR
Message: Cannot initialize the configuration framework: %s.

ID: 995

Severity: ERROR
Message: Unable to retrieve children of configuration entry with dn: %s.

ID: 996

Severity: ERROR
Message: Unable to load the configuration-enabled schema: %s.

ID: 997

Severity: ERROR
Message: Backend config error when trying to delete an entry: %s.

ID: 998

Severity: ERROR
Message: The HTTP endpoint configuration defined in %s is referencing a non existing authorization DN %s.

ID: 999

Severity: ERROR
Message: The HTTP endpoint configuration defined in %s is referencing mutually exclusive authorization DNs %s and %s.

ID: 1000

Severity: ERROR
Message: Unable to read the configuration from %s in the REST2LDAP endpoint configuration entry %s: %s.

IDs: 1001-1500

ID: 1001

Severity: ERROR
Message: Invalid JSON element %s from %s in the REST2LDAP endpoint configuration entry %s: %s.

ID: 1002

Severity: ERROR
Message: Invalid configuration element from %s in the REST2LDAP endpoint configuration entry %s: %s.

ID: 1003

Severity: ERROR
Message: The OAuth2 authorization mechanism defined in %s contains an invalid JSON Pointer %s: %s.

ID: 1004

Severity: ERROR
Message: The authorization mechanism defined in %s is referencing a non-existing or non-readable directory: %s.

ID: 1005

Severity: ERROR
Message: The authorization mechanism defined in %s is referencing a non existing DN: %s.

ID: 1006

Severity: ERROR
Message: The authorization mechanism defined in %s is referencing an invalid URL %s: %s.

ID: 1007

Severity: ERROR
Message: Unable to configure the authorization mechanism defined in %s: %s.

ID: 1008

Severity: ERROR
Message: The requested admin API version '%s' is unsupported. This endpoint only supports the following admin API version(s): %s.

ID: 1009

Severity: ERROR
Message: The configuration of schema provider '%s' is not acceptable for the following reasons: %s.

ID: 1010

Severity: ERROR
Message: The schema provider class '%s' could not be instantiated or initialized with the configuration '%s' : %s.

ID: 1011

Severity: ERROR
Message: The core schema provider defined by '%s' has been disabled. The core schema must always be enabled.

ID: 1012

Severity: WARNING
Message: The config schema file '%s' generated warning when trying to update schema with its content: %s.

ID: 1013

Severity: WARNING
Message: The config schema file '%s' generated warning when trying to update schema with its content, despite allowing to overwrite definitions: %s.

ID: 1014

Severity: ERROR
Message: Unable to configure the backend '%s' because one of its base DNs is the empty DN.

ID: 1015

Severity: ERROR
Message: Cannot configure new SSL protocols because the following protocols are not supported: %s. Look for supported protocols in 'cn=jvm,cn=monitor'.

ID: 1016

Severity: ERROR
Message: Cannot configure new SSL cipher suites because the following cipher suites are not supported: %s. Look for supported cipher suites in 'cn=jvm,cn=monitor'.

ID: 1017

Severity: ERROR
Message: The metric name pattern to exclude '%s' cannot be parsed as a valid regular expression due to the following error: '%s'.

ID: 1018

Severity: ERROR
Message: The metric name pattern to include '%s' cannot be parsed as a valid regular expression due to the following error: '%s'.

ID: 1019

Severity: ERROR
Message: The list of keys defined for the JSON matching rule contains an invalid JSON pointer : %s.

ID: 1020

Severity: ERROR
Message: Cannot create the property resolver due to the following error: '%s'.

ID: 1021

Severity: ERROR
Message: Error creating SSL socket factory: %s.

ID: 1022

Severity: ERROR
Message: The smtp-server value '%s' is invalid: %s.

ID: 1023

Severity: ERROR
Message: Unable to resolve the host for the listen address '%s' of the LDAP connection handler %s.

ID: 1024

Severity: WARNING
Message: The latest archived configuration file %s appears to be invalid. Forcing creation of a new one.

ID: 1025

Severity: WARNING
Message: '%s' is DEPRECATED for removal since %s. Its usage is highly discouraged.

ID: 1026

Severity: WARNING
Message: '%s' is LEGACY since %s. Its usage is highly discouraged.

ID: 1027

Severity: ERROR
Message: Abandon requests cannot be canceled.

ID: 1028

Severity: ERROR
Message: Bind requests cannot be canceled.

ID: 1029

Severity: ERROR
Message: Unbind requests cannot be canceled.

ID: 1030

Severity: INFO
Message: Client Unbind.

ID: 1031

Severity: INFO
Message: Client Disconnect.

ID: 1032

Severity: INFO
Message: Client Connection Rejected.

ID: 1033

Severity: INFO
Message: I/O Error.

ID: 1034

Severity: INFO
Message: Protocol Error.

ID: 1035

Severity: INFO
Message: Server Shutdown.

ID: 1036

Severity: INFO
Message: Administrative Termination.

ID: 1037

Severity: INFO
Message: Security Problem.

ID: 1038

Severity: INFO
Message: Maximum Request Size Exceeded.

ID: 1039

Severity: INFO
Message: Administrative Limit Exceeded.

ID: 1040

Severity: INFO
Message: Idle Time Limit Exceeded.

ID: 1041

Severity: INFO
Message: I/O Timeout.

ID: 1042

Severity: INFO
Message: Connection Closed by Plugin.

ID: 1043

Severity: INFO
Message: Unknown Closure Reason.

ID: 1044

Severity: INFO
Message: Operations Error.

ID: 1045

Severity: INFO
Message: Invalid Credentials.

ID: 1046

Severity: INFO
Message: Processing on this operation has been canceled because the Directory Server is shutting down.

ID: 1047

Severity: ERROR
Message: %s encountered an uncaught exception while processing operation %s: %s.

ID: 1048

Severity: WARNING
Message: %s is unexpectedly exiting when the Directory Server is not in the process of shutting down. This likely indicates that the thread encountered an unexpected error.

ID: 1049

Severity: WARNING
Message: The request to process this operation has been rejected because the Directory Server has already started its shutdown process.

ID: 1050

Severity: WARNING
Message: %s was interrupted while waiting for new work: %s. This should not happen, but the thread will resume waiting for new work so there should be no adverse effects.

ID: 1051

Severity: WARNING
Message: An unexpected exception was caught while %s was waiting for new work: %s. This should not happen, but the thread will resume waiting for new work so there should be no adverse effects.

ID: 1052

Severity: WARNING
Message: The work queue caught an exception while trying to cancel pending operation %s when the Directory Server was shutting down: %s.

ID: 1053

Severity: INFO
Message: Server Error.

ID: 1054

Severity: ERROR
Message: The Directory Server is currently running. The configuration may not be bootstrapped while the server is online.

ID: 1055

Severity: ERROR
Message: The Directory Server may not be started before the configuration has been bootstrapped.

ID: 1056

Severity: ERROR
Message: The Directory Server may not be started while it is already running. Please stop the running instance before attempting to start it again.

ID: 1057

Severity: INFO
Message: The Directory Server is beginning the configuration bootstrapping process.

ID: 1058

Severity: NOTICE
Message: %s (build %s, revision number %s) starting up.

ID: 1059

Severity: NOTICE
Message: The Directory Server has started successfully.

ID: 1060

Severity: ERROR
Message: An error occurred while attempting to create the JMX MBean server that will be used for monitoring, notification, and configuration interaction within the Directory Server: %s.

ID: 1061

Severity: NOTICE
Message: The Directory Server has sent an alert notification generated by class %s (alert type %s, alert ID %s): %s.

ID: 1062

Severity: ERROR
Message: An uncaught exception during processing for thread "%s" has caused it to terminate abnormally. The stack trace for that exception is: %s.

ID: 1063

Severity: NOTICE
Message: The Directory Server has started the shutdown process. The shutdown was initiated by an instance of class %s and the reason provided for the shutdown was %s.

ID: 1064

Severity: ERROR
Message: The Directory Server shutdown hook detected that the JVM is shutting down. This generally indicates that JVM received an external request to stop (e.g., through a kill signal).

ID: 1065

Severity: ERROR
Message: An error occurred while trying to retrieve the root DSE configuration entry (cn=Root DSE,cn=config) from the Directory Server configuration: %s.

ID: 1066

Severity: WARNING
Message: Entry "%s" contains a value "%s" for attribute %s that is invalid according to the syntax for that attribute: %s.

ID: 1067

Severity: WARNING
Message: Entry "%s" does not contain any values for attribute "%s".

ID: 1068

Severity: WARNING
Message: Entry "%s" does not contain any values for attribute "%s" with the specified set of options.

ID: 1069

Severity: NOTICE
Message: The Directory Server is now stopped.

ID: 1070

Severity: INFO
Message: %s has been stopped because the total number of worker threads in the Directory Server was reduced.

ID: 1071

Severity: INFO
Message: Processing on this operation has been canceled because the Directory Server received a bind request on this connection, which requires that all operations in progress to be abandoned.

ID: 1072

Severity: ERROR
Message: Unable to bind to the Directory Server because no such user exists in the server.

ID: 1073

Severity: ERROR
Message: A fatal error occurred when executing one of the Directory Server startup plugins: %s (error ID %d). The Directory Server startup process has been aborted.

ID: 1074

Severity: ERROR
Message: Unable to bind to the Directory Server using simple authentication because that user does not have a password.

ID: 1075

Severity: ERROR
Message: Unable to process the bind request because it attempted to use an unknown SASL mechanism %s that is not available in the Directory Server.

ID: 1076

Severity: ERROR
Message: The specified entry %s does not exist in the Directory Server.

ID: 1077

Severity: INFO
Message: The operation was canceled because the client issued an abandon request (message ID %d) for this operation.

ID: 1078

Severity: ERROR
Message: The provided entry cannot be added because it contains a null DN. This DN is reserved for the root DSE, and that entry may not be added over protocol.

ID: 1079

Severity: ERROR
Message: The provided entry %s cannot be added because it does not have a parent and is not defined as one of the suffixes within the Directory Server.

ID: 1080

Severity: ERROR
Message: Entry %s cannot be added because its parent entry %s does not exist in the server.

ID: 1081

Severity: ERROR
Message: Entry %s cannot be added because the server failed to obtain a write lock for this entry after multiple attempts.

ID: 1082

Severity: ERROR
Message: Entry %s cannot be removed because the server failed to obtain a write lock for this entry after multiple attempts.

ID: 1083

Severity: ERROR
Message: The maximum time limit of %d seconds for processing this search operation has expired.

ID: 1084

Severity: ERROR
Message: This search operation has sent the maximum of %d entries to the client.

ID: 1085

Severity: ERROR
Message: The entry %s specified as the search base does not exist in the Directory Server.

ID: 1086

Severity: ERROR
Message: Entry %s does not exist in the Directory Server.

ID: 1087

Severity: ERROR
Message: Entry %s cannot be removed because the backend that should contain that entry has a subordinate backend with a base DN of %s that is below the target DN.

ID: 1088

Severity: ERROR
Message: A modify DN operation cannot be performed on entry %s because the new RDN would not have a parent DN.

ID: 1089

Severity: ERROR
Message: The modify DN operation for entry %s cannot be performed because no backend is registered to handle that DN.

ID: 1090

Severity: ERROR
Message: The modify DN operation for entry %s cannot be performed because no backend is registered to handle the new DN %s.

ID: 1091

Severity: ERROR
Message: The modify DN operation for entry %s cannot be performed because the backend holding the current entry is different from the backend used to handle the new DN %s. Modify DN operations may not span multiple backends.

ID: 1092

Severity: ERROR
Message: The modify DN operation for entry %s cannot be performed because the server was unable to obtain a write lock for that DN.

ID: 1093

Severity: ERROR
Message: The modify DN operation for entry %s cannot be performed because the server was unable to obtain a write lock for the new DN %s.

ID: 1094

Severity: ERROR
Message: The modify DN operation for entry %s cannot be performed because that entry does not exist in the server.

ID: 1095

Severity: ERROR
Message: Entry %s cannot be modified because the server failed to obtain a write lock for this entry after multiple attempts.

ID: 1096

Severity: ERROR
Message: Entry %s cannot be modified because no such entry exists in the server.

ID: 1097

Severity: ERROR
Message: Entry %s cannot be modified because the modification contained an add component for attribute %s but no values were provided.

ID: 1098

Severity: ERROR
Message: When attempting to modify entry %s to add one or more values for attribute %s, value "%s" was found to be invalid according to the associated syntax: %s.

ID: 1099

Severity: ERROR
Message: Entry %s cannot be modified because it would have resulted in one or more duplicate values for attribute %s: %s.

ID: 1100

Severity: ERROR
Message: Entry %s cannot be modified because the change to attribute %s would have removed a value used in the RDN.

ID: 1101

Severity: ERROR
Message: Entry %s cannot be modified because the attempt to update attribute %s would have removed one or more values from the attribute that were not present: %s.

ID: 1102

Severity: ERROR
Message: Entry %s cannot be modified because an attempt was made to remove one or more values from attribute %s but this attribute is not present in the entry.

ID: 1103

Severity: ERROR
Message: When attempting to modify entry %s to replace the set of values for attribute %s, value "%s" was found to be invalid according to the associated syntax: %s.

ID: 1104

Severity: ERROR
Message: Entry %s cannot be modified because an attempt was made to increment the value of attribute %s which is used as an RDN attribute for the entry.

ID: 1105

Severity: ERROR
Message: Entry %s cannot be modified because an attempt was made to increment the value of attribute %s but the request did not include a value for that attribute specifying the amount by which to increment the value.

ID: 1106

Severity: ERROR
Message: Entry %s cannot be modified because an attempt was made to increment the value of attribute %s but the request contained multiple values, where only a single integer value is allowed.

ID: 1107

Severity: ERROR
Message: Entry %s cannot be modified because an attempt was made to increment the value of attribute %s but that attribute did not have any values in the target entry.

ID: 1108

Severity: ERROR
Message: Entry %s cannot be modified because an attempt was made to increment the value of attribute %s but the value "%s" could not be parsed as an integer.

ID: 1109

Severity: ERROR
Message: Entry %s cannot be modified because the resulting entry would have violated the server schema: %s.

ID: 1110

Severity: ERROR
Message: There is no extended operation handler registered with the Directory Server for handling extended operations with a request OID of %s.

ID: 1111

Severity: ERROR
Message: An unexpected error was encountered while processing a search in one of the Directory Server backends: %s.

ID: 1112

Severity: ERROR
Message: The modify DN operation for entry %s cannot be performed because the change would have violated the server schema: %s.

ID: 1113

Severity: ERROR
Message: Object class %s cannot be added to entry %s because that class is not defined in the Directory Server schema.

ID: 1114

Severity: ERROR
Message: The password provided by the user did not match any password(s) stored in the user’s entry.

ID: 1115

Severity: INFO
Message: Display general system information.

ID: 1116

Severity: ERROR
Message: An error occurred while attempting to parse the provided set of command line arguments: %s.

ID: 1117

Severity: ERROR
Message: An error occurred while attempting to bootstrap the Directory Server: %s.

ID: 1118

Severity: ERROR
Message: An error occurred while trying to start the Directory Server: %s.

ID: 1119

Severity: ERROR
Message: The attempt to obtain a shared lock on file %s was rejected because an exclusive lock was already held on that file.

ID: 1120

Severity: ERROR
Message: The attempt to obtain a shared lock on file %s was rejected because the attempt to create the lock file failed: %s.

ID: 1121

Severity: ERROR
Message: The attempt to obtain a shared lock on file %s was rejected because the attempt to open the lock file failed: %s.

ID: 1122

Severity: ERROR
Message: The attempt to obtain a shared lock on file %s was rejected because an error occurred while attempting to acquire the lock: %s.

ID: 1123

Severity: ERROR
Message: The shared lock requested for file %s was not granted, which indicates that another process already holds an exclusive lock on that file.

ID: 1124

Severity: ERROR
Message: The attempt to obtain an exclusive lock on file %s was rejected because an exclusive lock was already held on that file.

ID: 1125

Severity: ERROR
Message: The attempt to obtain an exclusive lock on file %s was rejected because a shared lock was already held on that file.

ID: 1126

Severity: ERROR
Message: The attempt to obtain an exclusive lock on file %s was rejected because the attempt to create the lock file failed: %s.

ID: 1127

Severity: ERROR
Message: The attempt to obtain an exclusive lock on file %s was rejected because the attempt to open the lock file failed: %s.

ID: 1128

Severity: ERROR
Message: The attempt to obtain an exclusive lock on file %s was rejected because an error occurred while attempting to acquire the lock: %s.

ID: 1129

Severity: ERROR
Message: The exclusive lock requested for file %s was not granted, which indicates that another process already holds a shared or exclusive lock on that file.

ID: 1130

Severity: ERROR
Message: The attempt to release the exclusive lock held on %s failed: %s.

ID: 1131

Severity: ERROR
Message: The attempt to release the shared lock held on %s failed: %s.

ID: 1132

Severity: ERROR
Message: The attempt to release the lock held on %s failed because no record of a lock on that file was found.

ID: 1133

Severity: WARNING
Message: An error occurred while attempting to release a shared lock for backend %s: %s. This lock should be automatically cleaned when the Directory Server process exits, so no additional action should be necessary.

ID: 1134

Severity: ERROR
Message: The Directory Server could not acquire an exclusive lock on file %s: %s. This generally means that another instance of this server is already running.

ID: 1135

Severity: ERROR
Message: Entry %s cannot be modified because the modification attempted to update attribute %s which is defined as NO-USER-MODIFICATION in the server schema.

ID: 1136

Severity: ERROR
Message: Entry %s cannot be added because it includes attribute %s which is defined as NO-USER-MODIFICATION in the server schema.

ID: 1137

Severity: ERROR
Message: Entry %s cannot be renamed because the current DN includes attribute %s which is defined as NO-USER-MODIFICATION in the server schema and the deleteOldRDN flag was set in the modify DN request.

ID: 1138

Severity: ERROR
Message: Entry %s cannot be renamed because the new RDN includes attribute %s which is defined as NO-USER-MODIFICATION in the server schema, and the target value for that attribute is not already included in the entry.

ID: 1139

Severity: ERROR
Message: The modify DN operation for entry %s cannot be performed because a pre-operation plugin modified the entry in a way that caused it to violate the server schema: %s.

ID: 1140

Severity: ERROR
Message: Entry %s cannot be modified because the request contained an LDAP assertion control and the associated filter did not match the contents of the entry.

ID: 1141

Severity: ERROR
Message: Entry %s cannot be modified because the request contained a critical control with OID %s that is not supported by the Directory Server for this type of operation.

ID: 1142

Severity: ERROR
Message: Entry %s cannot be removed because the request contained an LDAP assertion control and the associated filter did not match the contents of the entry.

ID: 1143

Severity: ERROR
Message: Entry %s cannot be removed because the request contained a critical control with OID %s that is not supported by the Directory Server for this type of operation.

ID: 1144

Severity: ERROR
Message: Entry %s cannot be renamed because the request contained an LDAP assertion control and the associated filter did not match the contents of the entry.

ID: 1145

Severity: ERROR
Message: Entry %s cannot be renamed because the request contained a critical control with OID %s that is not supported by the Directory Server for this type of operation.

ID: 1146

Severity: ERROR
Message: Entry %s cannot be added because the request contained an LDAP assertion control and the associated filter did not match the contents of the provided entry.

ID: 1147

Severity: ERROR
Message: Entry %s cannot be added because the request contained a critical control with OID %s that is not supported by the Directory Server for this type of operation.

ID: 1148

Severity: ERROR
Message: The search request cannot be processed because it contains an LDAP assertion control and an error occurred while trying to retrieve the base entry to compare it against the assertion filter: %s.

ID: 1149

Severity: ERROR
Message: The search request cannot be processed because it contains an LDAP assertion control but the search base entry does not exist.

ID: 1150

Severity: ERROR
Message: The search request cannot be processed because it contains an LDAP assertion control and the assertion filter did not match the contents of the base entry.

ID: 1151

Severity: ERROR
Message: The search request cannot be processed because it contains a critical control with OID %s that is not supported by the Directory Server for this type of operation.

ID: 1152

Severity: ERROR
Message: Cannot perform the compare operation on entry %s because the request contained an LDAP assertion control and the associated filter did not match the contents of the entry.

ID: 1153

Severity: ERROR
Message: Cannot perform the compare operation on entry %s because the request contained a critical control with OID %s that is not supported by the Directory Server for this type of operation.

ID: 1154

Severity: INFO
Message: The add operation was not actually performed in the Directory Server backend because the LDAP no-op control was present in the request.

ID: 1155

Severity: INFO
Message: The delete operation was not actually performed in the Directory Server backend because the LDAP no-op control was present in the request.

ID: 1156

Severity: INFO
Message: The modify operation was not actually performed in the Directory Server backend because the LDAP no-op control was present in the request.

ID: 1157

Severity: INFO
Message: The modify DN operation was not actually performed in the Directory Server backend because the LDAP no-op control was present in the request.

ID: 1158

Severity: ERROR
Message: Entry %s cannot be added because it is missing attribute %s that is contained in the entry’s RDN. All attributes used in the RDN must also be provided in the attribute list for the entry.

ID: 1159

Severity: ERROR
Message: Unable to process the bind request because it contained a control with OID %s that was marked critical but this control is not supported for the bind operation.

ID: 1160

Severity: WARNING
Message: There are multiple user-specific size limit values contained in user entry %s. The default server size limit will be used.

ID: 1161

Severity: WARNING
Message: The user-specific size limit value %s contained in user entry %s could not be parsed as an integer. The default server size limit will be used.

ID: 1162

Severity: WARNING
Message: There are multiple user-specific time limit values contained in user entry %s. The default server time limit will be used.

ID: 1163

Severity: WARNING
Message: The user-specific time limit value %s contained in user entry %s could not be parsed as an integer. The default server time limit will be used.

ID: 1165

Severity: ERROR
Message: An error occurred during preoperation synchronization processing for the add operation with connection ID %d and operation ID %d: %s.

ID: 1166

Severity: ERROR
Message: An error occurred during postoperation synchronization processing for the add operation with connection ID %d and operation ID %d: %s.

ID: 1167

Severity: ERROR
Message: An error occurred during preoperation synchronization processing for the delete operation with connection ID %d and operation ID %d: %s.

ID: 1168

Severity: ERROR
Message: An error occurred during postoperation synchronization processing for the delete operation with connection ID %d and operation ID %d: %s.

ID: 1169

Severity: ERROR
Message: An error occurred during preoperation synchronization processing for the modify operation with connection ID %d and operation ID %d: %s.

ID: 1170

Severity: ERROR
Message: An error occurred during postoperation synchronization processing for the modify operation with connection ID %d and operation ID %d: %s.

ID: 1171

Severity: ERROR
Message: An error occurred during preoperation synchronization processing for the modify DN operation with connection ID %d and operation ID %d: %s.

ID: 1172

Severity: ERROR
Message: An error occurred during postoperation synchronization processing for the modify DN operation with connection ID %d and operation ID %d: %s.

ID: 1173

Severity: ERROR
Message: An error occurred during conflict resolution synchronization processing for the add operation with connection ID %d and operation ID %d: %s.

ID: 1174

Severity: ERROR
Message: An error occurred during conflict resolution synchronization processing for the delete operation with connection ID %d and operation ID %d: %s.

ID: 1175

Severity: ERROR
Message: An error occurred during conflict resolution synchronization processing for the modify operation with connection ID %d and operation ID %d: %s.

ID: 1176

Severity: ERROR
Message: An error occurred during conflict resolution synchronization processing for the modify DN operation with connection ID %d and operation ID %d: %s.

ID: 1177

Severity: ERROR
Message: Unable to add entry %s because the Directory Server is configured in read-only mode.

ID: 1178

Severity: ERROR
Message: Unable to add entry %s because the backend that should hold that entry is configured in read-only mode.

ID: 1179

Severity: ERROR
Message: Unable to delete entry %s because the Directory Server is configured in read-only mode.

ID: 1180

Severity: ERROR
Message: Unable to delete entry %s because the backend that holds that entry is configured in read-only mode.

ID: 1181

Severity: ERROR
Message: Unable to modify entry %s because the Directory Server is configured in read-only mode.

ID: 1182

Severity: ERROR
Message: Unable to modify entry %s because the backend that holds that entry is configured in read-only mode.

ID: 1183

Severity: ERROR
Message: Unable to rename entry %s because the Directory Server is configured in read-only mode.

ID: 1184

Severity: ERROR
Message: Unable to rename entry %s because the backend that holds that entry is configured in read-only mode.

ID: 1185

Severity: ERROR
Message: Unable to process the simple bind request because it contained a bind DN but no password, which is forbidden by the server configuration.

ID: 1186

Severity: ERROR
Message: The password policy definition contained in configuration entry "%s" is invalid because the specified password attribute "%s" is not defined in the server schema.

ID: 1187

Severity: ERROR
Message: The password policy definition contained in configuration entry "%s" is invalid because the specified password attribute "%s" has a syntax OID of %s. The password attribute must have a syntax OID of either 1.3.6.1.4.1.26027.1.3.1 (for the user password syntax) or 1.3.6.1.4.1.4203.1.1.2 (for the authentication password syntax).

ID: 1188

Severity: ERROR
Message: An error occurred while attempting to determine the value for attribute ds-cfg-require-change-by-time in configuration entry %s: %s.

ID: 1189

Severity: ERROR
Message: The password policy definition contained in configuration entry "%s" is invalid because the specified last login time format "%s" is not a valid format string The last login time format string should conform to the syntax described in the API documentation for the 'java.text.SimpleDateFormat' class.

ID: 1190

Severity: ERROR
Message: The password policy definition contained in configuration entry "%s" is invalid because the specified previous last login time format "%s" is not a valid format string The previous last login time format strings should conform to the syntax described in the API documentation for the 'java.text.SimpleDateFormat' class.

ID: 1191

Severity: ERROR
Message: Attribute options are not allowed for the password attribute %s.

ID: 1192

Severity: ERROR
Message: Only a single value may be provided for the password attribute %s.

ID: 1193

Severity: ERROR
Message: Pre-encoded passwords are not allowed for the password attribute %s.

ID: 1194

Severity: ERROR
Message: The password value for attribute %s was found to be unacceptable: %s.

ID: 1195

Severity: ERROR
Message: The password policy defined in configuration entry %s is configured to always send at least one warning notification before the password is expired, but no warning interval has been set. If configuration attribute ds-cfg-expire-passwords-without-warning is set to "false", then configuration attribute ds-cfg-password-expiration-warning-interval must have a positive value.

ID: 1196

Severity: ERROR
Message: A bind operation is currently in progress on the associated client connection. No other requests may be made on this client connection until the bind processing has completed.

ID: 1197

Severity: ERROR
Message: A StartTLS operation is currently in progress on the associated client connection. No other requests may be made on this client connection until the StartTLS processing has completed.

ID: 1198

Severity: ERROR
Message: A SASL bind operation is currently in progress on the associated client connection. No other requests may be made on this client connection until the SASL bind processing has completed.

ID: 1199

Severity: ERROR
Message: %s must change their password before it will be allowed to request any other operations.

ID: 1200

Severity: ERROR
Message: An error occurred while attempting to decode the ds-pwp-password-policy-dn value "%s" in user entry "%s" as a DN: %s.

ID: 1201

Severity: ERROR
Message: User entry %s is configured to use a password policy subentry of %s but no such password policy has been defined in the server configuration.

ID: 1202

Severity: ERROR
Message: An error occurred while attempting to decode value "%s" for attribute %s in user entry %s in accordance with the generalized time format: %s.

ID: 1203

Severity: ERROR
Message: Unable to decode value "%s" for attribute %s in user entry %s as a Boolean value.

ID: 1204

Severity: ERROR
Message: The entry %s cannot be added due to insufficient access rights.

ID: 1205

Severity: ERROR
Message: The user cannot bind due to insufficient access rights.

ID: 1206

Severity: ERROR
Message: The entry %s cannot be compared due to insufficient access rights.

ID: 1207

Severity: ERROR
Message: The entry %s cannot be deleted due to insufficient access rights.

ID: 1208

Severity: ERROR
Message: The extended operation %s cannot be performed due to insufficient access rights.

ID: 1209

Severity: ERROR
Message: The entry %s cannot be renamed due to insufficient access rights.

ID: 1210

Severity: ERROR
Message: The entry %s cannot be modified due to insufficient access rights.

ID: 1211

Severity: ERROR
Message: The entry %s cannot be searched due to insufficient access rights.

ID: 1212

Severity: ERROR
Message: Rejecting a simple bind request because the password policy requires secure authentication.

ID: 1213

Severity: ERROR
Message: Rejecting a bind request because the account has been administratively disabled.

ID: 1214

Severity: ERROR
Message: Rejecting a bind request because the account has been locked due to too many failed authentication attempts.

ID: 1215

Severity: ERROR
Message: Rejecting a bind request because the account has been locked after the user’s password was not changed in a timely manner after an administrative reset.

ID: 1216

Severity: ERROR
Message: Rejecting a bind request because the account has been locked after remaining idle for too long.

ID: 1217

Severity: ERROR
Message: Rejecting a bind request because that user’s password is expired.

ID: 1218

Severity: ERROR
Message: An error occurred while attempting to update password policy state information for user %s: %s.

ID: 1219

Severity: ERROR
Message: Rejecting a SASL %s bind request for user %s because the password policy requires secure authentication.

ID: 1220

Severity: ERROR
Message: Rejecting a bind request because the account has expired.

ID: 1221

Severity: ERROR
Message: Attributes used to hold user passwords are not allowed to have any attribute options.

ID: 1222

Severity: ERROR
Message: Users are not allowed to change their own passwords.

ID: 1223

Severity: ERROR
Message: Password changes must be performed over a secure authentication channel.

ID: 1224

Severity: ERROR
Message: The password cannot be changed because it has not been long enough since the last password change.

ID: 1225

Severity: ERROR
Message: Multiple password values are not allowed in user entries.

ID: 1226

Severity: ERROR
Message: User passwords may not be provided in pre-encoded form.

ID: 1227

Severity: ERROR
Message: Invalid modification type %s attempted on password attribute %s.

ID: 1228

Severity: ERROR
Message: The user entry does not have any existing passwords to remove.

ID: 1229

Severity: ERROR
Message: The provided user password does not match any password in the user’s entry.

ID: 1230

Severity: ERROR
Message: The password policy requires that user password changes include the current password in the request.

ID: 1231

Severity: ERROR
Message: The password change would result in multiple password values in the user entry, which is not allowed.

ID: 1232

Severity: ERROR
Message: The provided password value was rejected by a password validator: %s.

ID: 1233

Severity: ERROR
Message: %s must change their password before it will be allowed to perform any other operations.

ID: 1234

Severity: WARNING
Message: The user password is about to expire (time to expiration: %s).

ID: 1235

Severity: ERROR
Message: The account has been locked as a result of too many failed authentication attempts (time to unlock: %s).

ID: 1236

Severity: ERROR
Message: The account has been locked as a result of too many failed authentication attempts. It may only be unlocked by an administrator.

ID: 1237

Severity: INFO
Message: The user password has been changed.

ID: 1238

Severity: INFO
Message: The user password has been administratively reset.

ID: 1239

Severity: INFO
Message: The user account has been administratively enabled.

ID: 1240

Severity: INFO
Message: The user account has been administratively disabled.

ID: 1241

Severity: INFO
Message: The user account has been administratively unlocked.

ID: 1242

Severity: ERROR
Message: The specified password value already exists in the user entry.

ID: 1243

Severity: ERROR
Message: Entry %s cannot be updated because the request did not contain any modifications.

ID: 1244

Severity: INFO
Message: Do not detach from the terminal and continue running in the foreground. This option cannot be used with the -t, --timeout option.

ID: 1245

Severity: INFO
Message: This utility can be used to start the Directory Server, as well as to obtain the server version and other forms of general server information.

ID: 1246

Severity: ERROR
Message: Unable to process the request for extended operation %s because it contained an unsupported critical control with OID %s.

ID: 1247

Severity: ERROR
Message: Unable to register backend %s with the Directory Server because another backend with the same backend ID is already registered.

ID: 1248

Severity: ERROR
Message: Unable to register base DN %s with the Directory Server for backend %s because that base DN is already registered for backend %s.

ID: 1249

Severity: ERROR
Message: Unable to register base DN %s with the Directory Server for backend %s because that backend already contains another base DN %s that is within the same hierarchical path.

ID: 1250

Severity: ERROR
Message: Unable to register base DN %s with the Directory Server for backend %s because that backend already contains another base DN %s that is not subordinate to the same base DN in the parent backend.

ID: 1251

Severity: ERROR
Message: Unable to register base DN %s with the Directory Server for backend %s because that backend already contains one or more other base DNs that are subordinate to backend %s but the new base DN is not.

ID: 1252

Severity: WARNING
Message: Backend %s already contains entry %s which has just been registered as the base DN for backend %s. These conflicting entries can cause unexpected or errant search results, and both backends should be reinitialized to ensure that each has the correct content.

ID: 1253

Severity: ERROR
Message: Unable to de-register base DN %s with the Directory Server because that base DN is not registered for any active backend.

ID: 1254

Severity: WARNING
Message: Base DN %s has been deregistered from the Directory Server for backend %s. This base DN had both superior and subordinate entries in other backends, and there might be inconsistent or unexpected behavior when accessing entries in this portion of the hierarchy because of the missing entries that had been held in the de-registered backend.

ID: 1255

Severity: ERROR
Message: Rejecting the requested operation because the connection has not been authenticated.

ID: 1256

Severity: WARNING
Message: Entry "%s" cannot be added because it contains attribute type %s which is declared OBSOLETE in the server schema.

ID: 1257

Severity: WARNING
Message: Entry "%s" cannot be added because it contains objectclass %s which is declared OBSOLETE in the server schema.

ID: 1258

Severity: ERROR
Message: Entry %s cannot be modified because the modification attempted to set one or more new values for attribute %s which is marked OBSOLETE in the server schema.

ID: 1259

Severity: ERROR
Message: Object class %s added to entry %s is marked OBSOLETE in the server schema.

ID: 1260

Severity: ERROR
Message: The modify DN operation for entry %s cannot be performed because the new RDN includes attribute type %s which is declared OBSOLETE in the server schema.

ID: 1261

Severity: WARNING
Message: Terminating the client connection because its associated authentication or authorization entry %s has been deleted.

ID: 1262

Severity: ERROR
Message: You do not have sufficient privileges to reset user passwords.

ID: 1263

Severity: ERROR
Message: You do not have sufficient privileges to access the server configuration.

ID: 1264

Severity: ERROR
Message: You do not have sufficient privileges to add entries that include privileges.

ID: 1265

Severity: ERROR
Message: You do not have sufficient privileges to modify the set of privileges contained in an entry.

ID: 1266

Severity: ERROR
Message: You do not have sufficient privileges to use the proxied authorization control.

ID: 1267

Severity: ERROR
Message: OpenDJ is configured to run as a Windows service and it cannot run in no-detach mode.

ID: 1268

Severity: ERROR
Message: Unable to decode an entry because it had an unsupported entry version byte value of %s.

ID: 1269

Severity: ERROR
Message: Unable to decode an entry because an unexpected exception was caught during processing: %s.

ID: 1270

Severity: ERROR
Message: The request control with Object Identifier (OID) "%s" cannot be used due to insufficient access rights.

ID: 1271

Severity: ERROR
Message: The connection handler %s is trying to use the listener %s which is already in use by another connection handler.

ID: 1272

Severity: ERROR
Message: No enabled connection handler available.

ID: 1273

Severity: ERROR
Message: Could not start connection handlers.

ID: 1274

Severity: ERROR
Message: Unable to process the non-root bind because the server is in lockdown mode.

ID: 1275

Severity: WARNING
Message: The Directory Server is entering lockdown mode, in which clients will only be allowed to connect via a loopback address, and only root users will be allowed to process operations.

ID: 1276

Severity: NOTICE
Message: The Directory Server is leaving lockdown mode and will resume normal operation.

ID: 1277

Severity: NOTICE
Message: Rejecting the requested operation because the server is in lockdown mode and will only accept requests from root users over loopback connections.

ID: 1278

Severity: ERROR
Message: Unable to decode the provided attribute because it used an undefined attribute description token %s.

ID: 1279

Severity: ERROR
Message: Unable to decode the provided object class set because it used an undefined token %s.

ID: 1280

Severity: ERROR
Message: Unable to decode the provided entry encode configuration element because it has an invalid length.

ID: 1281

Severity: ERROR
Message: Rejecting a bind request for user %s because either the entire server or the user’s backend has a writability mode of 'disabled' and password policy state updates would not be allowed.

ID: 1282

Severity: ERROR
Message: The provided new password was found in the password history for the user.

ID: 1283

Severity: WARNING
Message: There are multiple user-specific idle time limit values contained in user entry %s. The default server idle time limit will be used.

ID: 1284

Severity: WARNING
Message: The user-specific idle time limit value %s contained in user entry %s could not be parsed as an integer. The default server idle time limit will be used.

ID: 1285

Severity: INFO
Message: This connection has been terminated because it has remained idle for too long.

ID: 1286

Severity: ERROR
Message: The password policy configuration entry "%s" is invalid because if a maximum password age is configured, then the password expiration warning interval must be shorter than the maximum password age.

ID: 1287

Severity: ERROR
Message: The password policy configuration entry "%s" is invalid because if both a minimum password age and a maximum password age are configured, then the sum of the minimum password age and the password expiration warning interval must be shorter than the maximum password age.

ID: 1288

Severity: ERROR
Message: An error occurred while attempting to disconnect client connection %d: %s.

ID: 1289

Severity: ERROR
Message: The Directory Server is currently running. Environment configuration changes are not allowed with the server running.

ID: 1290

Severity: ERROR
Message: The specified server root directory '%s' is invalid. The specified path must exist and must be a directory.

ID: 1291

Severity: ERROR
Message: The specified config file path '%s' is invalid. The specified path must exist and must be a file.

ID: 1292

Severity: ERROR
Message: The specified schema configuration directory '%s' is invalid. The specified path must exist and must be a directory.

ID: 1293

Severity: ERROR
Message: The Directory Server is currently running. The environment configuration can not be altered while the server is online.

ID: 1294

Severity: ERROR
Message: An error occurred while attempting to initialize a SSL context for server to server communication: %s.

ID: 1295

Severity: INFO
Message: Attempt to start using the configuration that was in place at the last successful startup (if it is available) rather than using the current active configuration.

ID: 1296

Severity: INFO
Message: Error while searching base %s to synchronize the trust store: %s.

ID: 1297

Severity: ERROR
Message: An error occurred in the trust store synchronization thread: %s.

ID: 1298

Severity: INFO
Message: Error while trying to add entry %s to the trust store: %s.

ID: 1299

Severity: ERROR
Message: The password storage scheme defined in configuration entry %s does not support the auth password syntax, which is used by password attribute %s.

ID: 1300

Severity: ERROR
Message: Password policy configuration entry %s references deprecated password storage scheme DN %s which does not support the auth password syntax.

ID: 1301

Severity: WARNING
Message: The search filter "%s" used by group implementation %s is not indexed in backend %s. Backend initialization for this group implementation might take a very long time to complete.

ID: 1302

Severity: ERROR
Message: CryptoManager cannot get the requested digest %s: %s.

ID: 1303

Severity: ERROR
Message: CryptoManager cannot get the requested MAC engine %s: %s.

ID: 1304

Severity: ERROR
Message: CryptoManager cannot get the requested encryption cipher %s: %s.

ID: 1305

Severity: ERROR
Message: CryptoManager cannot get the preferred key wrapping cipher: %s.

ID: 1306

Severity: ERROR
Message: CryptoManager failed to retrieve the collection of instance-key-pair public-key-certificates from ADS container "%s": %s.

ID: 1307

Severity: ERROR
Message: CryptoManager failed to encode symmetric key attribute value: %s.

ID: 1308

Severity: ERROR
Message: CryptoManager symmetric key attribute value "%s" syntax is invalid: incorrect number of fields.

ID: 1309

Severity: ERROR
Message: CryptoManager symmetric key attribute value "%s" syntax is invalid. Parsing failed in field "%s" at offset %d.

ID: 1310

Severity: ERROR
Message: CryptoManager failed to decipher the wrapped secret-key value: %s.

ID: 1311

Severity: ERROR
Message: CryptoManager cannot find the public-key-certificate (identifier "%s") requested for symmetric key re-encoding.

ID: 1312

Severity: ERROR
Message: CryptoManager failed to decode the key entry identifier "%s": %s.

ID: 1313

Severity: ERROR
Message: CryptoManager passed invalid MAC algorithm "%s": %s.

ID: 1314

Severity: ERROR
Message: CryptoManager failed to initialize MAC engine: %s.

ID: 1315

Severity: ERROR
Message: CryptoManager passed invalid Cipher transformation "%s": %s.

ID: 1316

Severity: ERROR
Message: CryptoManager cannot initialize Cipher: %s.

ID: 1317

Severity: ERROR
Message: CryptoManager failed to write the stream prologue: %s.

ID: 1318

Severity: ERROR
Message: CryptoManager failed to decrypt the supplied data because it could not read the symmetric key identifier in the data prologue: %s.

ID: 1319

Severity: ERROR
Message: CryptoManager failed to decrypt the supplied data because the symmetric key identifier in the data prologue does not match any known key entries.

ID: 1320

Severity: ERROR
Message: CryptoManager failed to decrypt the supplied data because it could not read the cipher initialization vector in the data prologue.

ID: 1321

Severity: ERROR
Message: CryptoManager failed to decrypt the supplied data because there was an error reading from the input stream: %s.

ID: 1322

Severity: ERROR
Message: CryptoManager failed to import the symmetric key entry "%s" because it could not obtain a symmetric key attribute value that can be decoded by this instance.

ID: 1323

Severity: ERROR
Message: CryptoManager detected a field mismatch between the key entry to be imported and an entry in the key cache that share the key identifier "%s".

ID: 1324

Severity: ERROR
Message: CryptoManager failed to import the symmetric key entry "%s": %s.

ID: 1325

Severity: ERROR
Message: CryptoManager failed to import the symmetric key entry "%s" because it could not add a symmetric key attribute value that can be decoded by this instance.

ID: 1326

Severity: ERROR
Message: CryptoManager failed to instantiate a KeyGenerator for algorithm "%s": %s.

ID: 1327

Severity: ERROR
Message: CryptoManager failed to add locally produced symmetric key entry "%s": %s.

ID: 1328

Severity: ERROR
Message: CryptoManager cipher transformation specification "%s" is invalid: it must be of the form "algorithm/mode/padding".

ID: 1329

Severity: ERROR
Message: CryptoManager cipher transformation specification "%s" is invalid: it must be of the form "algorithm/mode/padding".

ID: 1330

Severity: ERROR
Message: CryptoManager failed to decrypt the supplied data because it could not read the version number in the data prologue: %s.

ID: 1331

Severity: ERROR
Message: CryptoManager failed to decrypt the supplied data because the version "%d" in the data prologue is unknown.

ID: 1332

Severity: ERROR
Message: CryptoManager failed to sign the wrapped key entry: %s.

ID: 1333

Severity: ERROR
Message: The wrapped key entry is missing the following attributes: %s.

ID: 1334

Severity: ERROR
Message: CryptoManager failed to find the master key pair with ID '%s', make sure cryptoManager has access to the master key pair that was used at the time of wrapping the key.

ID: 1335

Severity: ERROR
Message: The wrapped key entry signature does not match the entry content.

ID: 1336

Severity: ERROR
Message: CryptoManager failed to verify the wrapped key entry signature: %s.

ID: 1337

Severity: ERROR
Message: The provided entry %s cannot be added because its suffix is not defined as one of the suffixes within the Directory Server.

ID: 1338

Severity: NOTICE
Message: %s.

ID: 1339

Severity: NOTICE
Message: Build ID: %s.

ID: 1340

Severity: ERROR
Message: Start TLS extended operations cannot be canceled.

ID: 1341

Severity: ERROR
Message: Cancel extended operations can not be canceled.

ID: 1342

Severity: ERROR
Message: The modify DN operation for entry %s cannot be performed because the new superior entry %s is equal to or a subordinate of the entry to be moved.

ID: 1343

Severity: INFO
Message: Unable to process operation because this search scope is not allowed in this network group.

ID: 1344

Severity: ERROR
Message: Entry %s can not be added because BER encoding of %s attribute is not supported.

ID: 1345

Severity: INFO
Message: No worker queue thread pool size specified: sizing automatically to use %d threads.

ID: 1346

Severity: INFO
Message: Maximum time (in seconds) to wait before the command returns (the server continues the startup process, regardless). A value of '0' indicates an infinite timeout, which means that the command returns only when the server startup is completed. The default value is 60 seconds. This option cannot be used with the -N, --nodetach option.

ID: 1347

Severity: ERROR
Message: In no-detach mode, the 'timeout' option cannot be used.

ID: 1348

Severity: WARNING
Message: The search filter "%s" used by subentry manager is not indexed in backend %s. Backend initialization for subentry manager processing might take a very long time to complete.

ID: 1349

Severity: ERROR
Message: The subentry %s must have either the pwdPolicy or ds-pwp-password-policy objectclasses, which is required for the Directory Server password policy.

ID: 1350

Severity: ERROR
Message: CryptoManager failed to initialize because the specified cipher key length "%d" is beyond the allowed cryptography strength "%d" in jurisdiction policy files.

ID: 1351

Severity: ERROR
Message: Failed to update free disk space for directory %s: %s.

ID: 1352

Severity: ERROR
Message: The directory server is not accepting a new persistent search request because the server has already reached its limit.

ID: 1353

Severity: ERROR
Message: This operation involves LDAP subentries which you do not have sufficient privileges to administer.

ID: 1354

Severity: INFO
Message: Invalid Credentials.

ID: 1355

Severity: WARNING
Message: Entry "%s" contains a value for attribute %s that is invalid according to the syntax for that attribute: %s.

ID: 1356

Severity: ERROR
Message: When attempting to modify entry %s, one value for attribute %s was found to be invalid according to the associated syntax: %s.

ID: 1357

Severity: ERROR
Message: When attempting to modify entry %s to replace the set of values for attribute %s, one value was found to be invalid according to the associated syntax: %s.

ID: 1358

Severity: ERROR
Message: The password policy definition contained in configuration entry "%s" is invalid because the password validator "%s" specified in attribute "%s" cannot be found.

ID: 1359

Severity: ERROR
Message: The password could not be validated because of misconfiguration. Please contact the administrator.

ID: 1360

Severity: ERROR
Message: The password for user %s could not be validated because the password policy subentry %s is referring to an unknown password validator (%s). Please make sure the password policy subentry only refers to validators that exist on all replicas.

ID: 1361

Severity: ERROR
Message: Could not get filesystem for directory %s: %s.

ID: 1362

Severity: ERROR
Message: The free space (%s) on the disk containing directory "%s" is between low and full threshold for the following subsystems: %s. Write operations are only permitted by a user with the BYPASS_LOCKDOWN privilege until the free space rises above the threshold. Replication updates are still allowed.

ID: 1363

Severity: ERROR
Message: The free space (%s) on the disk containing directory "%s" is below full threshold for the following subsystems: %s. Write operations to the backend, replication updates included, will fail until the free space rises above the threshold.

ID: 1364

Severity: NOTICE
Message: The free space (%s) on the disk containing directory "%s" is now above the low threshold for the following subsystems: %s.

ID: 1365

Severity: ERROR
Message: Cannot properly use SHA-1 using the java provider. Verify java.security is properly configured.

ID: 1366

Severity: ERROR
Message: Cannot complete initialization of server’s backends because the root and administrative backends have not been initialized yet.

ID: 1367

Severity: ERROR
Message: An error occurred while adding Service Discovery Mechanism '%s': %s.

ID: 1368

Severity: ERROR
Message: Registering Service Discovery Manager’s listener failed : %s.

ID: 1369

Severity: ERROR
Message: Discovery mechanism '%s' initialization failed : %s.

ID: 1370

Severity: WARNING
Message: Replication server '%s' references server '%s' that could not be parsed correctly; the definition will be skipped.

ID: 1371

Severity: ERROR
Message: Error occurred while creating an SSL context for service discovery mechanism '%s' : %s.

ID: 1372

Severity: ERROR
Message: Could not retrieve the list of replicas from replication server '%s' for replication server group '%s'. Exception : %s.

ID: 1373

Severity: ERROR
Message: Could not retrieve auto-configuration data from directory server '%s' for replication server group '%s'. Exception : %s".

ID: 1374

Severity: ERROR
Message: Service discovery mechanism '%s' failed to refresh the partition information. Exception : %s",.

ID: 1375

Severity: WARNING
Message: Settings for Replica '%s' should provide a hostname.

ID: 1376

Severity: WARNING
Message: Cannot connect to replica '%s' for replication service discovery mechanism '%s'. The replica entry is: %s.

ID: 1377

Severity: WARNING
Message: Cannot gather naming contexts from server %s: %s.

ID: 1378

Severity: WARNING
Message: Scheduled discovery '%s' failed : %s.

ID: 1379

Severity: ERROR
Message: Service discovery mechanism '%s' failed to refresh the connection options. Exception : %s",.

ID: 1380

Severity: ERROR
Message: "%s" (low=%s, full=%s).

ID: 1381

Severity: ERROR
Message: You do not have sufficient privileges to read directory server monitoring information.

ID: 1382

Severity: WARNING
Message: There are multiple user-specific cursor entry limit values contained in user entry '%s'. The default server cursor entry limit will be used.

ID: 1383

Severity: WARNING
Message: The user-specific cursor entry limit value '%s' contained in user entry '%s' could not be parsed as an integer. The default server cursor entry limit will be used.

ID: 1384

Severity: ERROR
Message: Entry %s cannot be added because its parent entry %s is a subentry.

ID: 1385

Severity: INFO
Message: Server in lockdown mode.

ID: 1386

Severity: ERROR
Message: The master key with alias '%s' does not exist in the '%s' key manager. Please check that the correct key manager has been configured and that it contains the specified master keys.

ID: 1387

Severity: ERROR
Message: The CryptoManager could not encode a symmetric because the master key with alias '%s' does not exist in the '%s' key manager. Please check that the correct key manager has been configured and that it contains the specified master keys.

ID: 1388

Severity: ERROR
Message: The CryptoManager could was not able to obtain the deployment’s pepper. Please check that the CryptoManager has a correctly configured key manager and preferred digest mechanism.

ID: 1389

Severity: ERROR
Message: No enabled password storage schemes in '%s' in subentry '%s'.

ID: 1390

Severity: ERROR
Message: Cannot use both pwdValidatorPolicy and ds-pwp-validator in subentry '%s'.

ID: 1391

Severity: ERROR
Message: The dictionary data could not be decompressed: %s.

ID: 1392

Severity: ERROR
Message: The dictionary validator configuration is invalid.

ID: 1393

Severity: WARNING
Message: Found %d conflicting password policy subentries for user %s, used %s.

ID: 1394

Severity: ERROR
Message: Requested cipher for a non existing cipher key: cryptographic services were not properly initialized, programming error.

ID: 1395

Severity: ERROR
Message: Type %d is not a valid secret key type. The Valid type is '0' for a cipher key. Secret key initialization cannot continue, check the data source and re-initialize if needed.

ID: 1396

Severity: ERROR
Message: The subentry %s cannot use both %s and %s objectclasses.

ID: 1397

Severity: ERROR
Message: The subentry %s using the %s objectclass cannot define validators using the old %s objectclass.

ID: 1398

Severity: ERROR
Message: The subentry %s using the %s objectclass cannot define validators using the new %s objectclass.

ID: 1399

Severity: ERROR
Message: The value for the '%s' attribute is not a valid duration.

ID: 1400

Severity: ERROR
Message: The value for the '%s' attribute is not a valid integer.

ID: 1401

Severity: ERROR
Message: The value for the '%s' attribute is not a valid boolean.

ID: 1402

Severity: ERROR
Message: The value for the '%s' attribute is not a valid time.

ID: 1403

Severity: ERROR
Message: The value for the '%s' attribute is not a valid string.

ID: 1404

Severity: ERROR
Message: The value for the '%s' attribute is not a valid attribute.

ID: 1405

Severity: ERROR
Message: The values for the '%s' attribute are not valid strings.

ID: 1406

Severity: ERROR
Message: The value for the '%s' attribute is not a valid state update failure policy.

ID: 1407

Severity: ERROR
Message: A values for the '%s' attribute is not a valid attribute name.

ID: 1408

Severity: ERROR
Message: Could not start connection handler %s with listen addresses "%s". The error was: %s.

ID: 1409

Severity: INFO
Message: Registered %d static groups, %d dynamic groups and %d virtual static groups. The static group cache is using %d bytes of memory.

ID: 1410

Severity: INFO
Message: The following logging categories are defined for the server: %s.

ID: 1411

Severity: ERROR
Message: An error occurred while attempting to initialize the message digest generator for the %s algorithm: %s.

ID: 1412

Severity: ERROR
Message: An error occurred while attempting to base64-decode the password value %s: %s.

ID: 1413

Severity: ERROR
Message: The %s password storage scheme is not reversible, so it is impossible to recover the plaintext version of an encoded password.

ID: 1414

Severity: ERROR
Message: An error occurred while trying to register the JMX alert handler with the MBean server: %s.

ID: 1415

Severity: ERROR
Message: An unexpected error occurred while attempting to encode a password using the storage scheme defined in class %s: %s.

ID: 1416

Severity: ERROR
Message: The ds-cfg-include-filter attribute of configuration entry %s, which specifies a set of search filters that may be used to control which entries are included in the cache, has an invalid value of "%s": %s.

ID: 1417

Severity: ERROR
Message: The ds-cfg-exclude-filter attribute of configuration entry %s, which specifies a set of search filters that may be used to control which entries are excluded from the cache, has an invalid value of "%s": %s.

ID: 1418

Severity: ERROR
Message: A fatal error occurred while trying to initialize fifo entry cache: %s.

ID: 1419

Severity: ERROR
Message: A fatal error occurred while trying to initialize soft reference entry cache: %s.

ID: 1420

Severity: ERROR
Message: An unexpected error occurred while attempting to decode the password modify extended request sequence: %s.

ID: 1421

Severity: ERROR
Message: The password modify extended request cannot be processed because it does not contain an authorization ID and the underlying connection is not authenticated.

ID: 1422

Severity: ERROR
Message: The password modify extended request cannot be processed because the server was unable to obtain a write lock on user entry %s after multiple attempts.

ID: 1423

Severity: ERROR
Message: The password modify extended request cannot be processed because the server cannot decode "%s" as a valid DN for use in the authorization ID for the operation.

ID: 1424

Severity: ERROR
Message: The password modify extended request cannot be processed because it contained an invalid userIdentity field. The provided userIdentity string was "%s".

ID: 1425

Severity: ERROR
Message: The password modify extended request cannot be processed because it was not possible to identify the user entry to update based on the authorization DN of "%s".

ID: 1426

Severity: ERROR
Message: The password modify extended operation cannot be processed because the current password provided for the user is invalid.

ID: 1427

Severity: ERROR
Message: The keystore file %s specified in attribute ds-cfg-key-store-file of configuration entry %s does not exist.

ID: 1428

Severity: ERROR
Message: An error occurred while trying to load the keystore contents from file %s: %s.

ID: 1429

Severity: ERROR
Message: The keystore type %s specified in attribute ds-cfg-key-store-type of configuration entry %s is not valid: %s.

ID: 1430

Severity: ERROR
Message: An error occurred while trying to access the PKCS#11 key manager: %s.

ID: 1431

Severity: ERROR
Message: An error occurred while trying to create a key manager factory to access the contents of keystore file %s: %s.

ID: 1432

Severity: ERROR
Message: An error occurred while trying to create a key manager factory to access the contents of the PKCS#11 keystore: %s.

ID: 1433

Severity: ERROR
Message: The trust store file %s specified in attribute ds-cfg-trust-store-file of configuration entry %s does not exist.

ID: 1434

Severity: ERROR
Message: An error occurred while trying to load the trust store contents from file %s: %s.

ID: 1435

Severity: ERROR
Message: An error occurred while trying to create a trust manager factory to access the contents of trust store file %s: %s.

ID: 1436

Severity: ERROR
Message: The trust store type %s specified in attribute ds-cfg-trust-store-type of configuration entry %s is not valid: %s.

ID: 1437

Severity: ERROR
Message: Could not map the provided certificate chain to a user entry because no peer certificate was available.

ID: 1438

Severity: ERROR
Message: Could not map the provided certificate chain to a user because the peer certificate was not an X.509 certificate (peer certificate format was %s).

ID: 1439

Severity: ERROR
Message: Could not map the provided certificate chain to a user because the peer certificate subject "%s" could not be decoded as an LDAP DN: %s.

ID: 1440

Severity: ERROR
Message: Could not map the provided certificate chain to a user because an error occurred while attempting to retrieve the user entry with DN "%s": %s.

ID: 1441

Severity: ERROR
Message: Could not map the provided certificate chain to a user because no user entry exists with a DN of %s.

ID: 1442

Severity: ERROR
Message: The SASL EXTERNAL bind request could not be processed because the associated bind request does not have a reference to the client connection.

ID: 1443

Severity: ERROR
Message: The SASL EXTERNAL bind request could not be processed because the associated client connection instance is not an instance of LDAPClientConnection.

ID: 1444

Severity: ERROR
Message: The SASL EXTERNAL bind request could not be processed because the client did not present a certificate chain during SSL/TLS negotiation.

ID: 1445

Severity: ERROR
Message: The SASL EXTERNAL bind request failed because the certificate chain presented by the client during SSL/TLS negotiation could not be mapped to a user entry in the Directory Server.

ID: 1447

Severity: ERROR
Message: StartTLS cannot be used on this client connection because this connection type is not capable of using StartTLS to protect its communication.

ID: 1448

Severity: ERROR
Message: Unable to authenticate via SASL EXTERNAL because the mapped user entry %s does not have any certificates with which to verify the presented peer certificate.

ID: 1449

Severity: ERROR
Message: Unable to authenticate via SASL EXTERNAL because the mapped user entry %s did not contain the peer certificate presented by the client.

ID: 1450

Severity: ERROR
Message: An error occurred while attempting to validate the peer certificate presented by the client with a certificate from the user’s entry %s: %s.

ID: 1451

Severity: ERROR
Message: SASL PLAIN authentication requires that SASL credentials be provided but none were included in the bind request.

ID: 1452

Severity: ERROR
Message: The SASL PLAIN bind request did not include any NULL characters. NULL characters are required as delimiters between the authorization ID and authentication ID, and also between the authentication ID and the password.

ID: 1453

Severity: ERROR
Message: The SASL PLAIN bind request did not include a second NULL character in the credentials, which is required as a delimiter between the authentication ID and the password.

ID: 1454

Severity: ERROR
Message: The authentication ID contained in the SASL PLAIN bind request had a length of zero characters, which is not allowed. SASL PLAIN authentication does not allow an empty string for use as the authentication ID.

ID: 1455

Severity: ERROR
Message: The password contained in the SASL PLAIN bind request had a length of zero characters, which is not allowed. SASL PLAIN authentication does not allow an empty string for use as the password.

ID: 1456

Severity: ERROR
Message: An error occurred while attempting to decode the SASL PLAIN authentication ID "%s" because it appeared to contain a DN but DN decoding failed: %s.

ID: 1457

Severity: ERROR
Message: The authentication ID in the SASL PLAIN bind request appears to be an empty DN. This is not allowed.

ID: 1458

Severity: ERROR
Message: An error occurred while attempting to retrieve user entry %s as specified in the DN-based authentication ID of a SASL PLAIN bind request: %s.

ID: 1459

Severity: ERROR
Message: The server was not able to find any user entries for the provided authentication ID of %s.

ID: 1460

Severity: ERROR
Message: The provided password is invalid.

ID: 1461

Severity: INFO
Message: An unsupported or unexpected callback was provided to the SASL server for use during %s authentication: %s.

ID: 1462

Severity: ERROR
Message: An unexpected error occurred while attempting to determine the value of the ds-cfg-server-fqdn attribute in configuration entry %s: %s.

ID: 1463

Severity: ERROR
Message: An unexpected error occurred while trying to create an %s context: %s.

ID: 1464

Severity: ERROR
Message: An error occurred while attempting to decode the SASL %s username "%s" because it appeared to contain a DN but DN decoding failed: %s.

ID: 1465

Severity: ERROR
Message: The username in the SASL %s bind request appears to be an empty DN. This is not allowed.

ID: 1466

Severity: ERROR
Message: An error occurred while attempting to retrieve user entry %s as specified in the DN-based username of a SASL %s bind request: %s.

ID: 1467

Severity: ERROR
Message: The username contained in the SASL %s bind request had a length of zero characters, which is not allowed. %s authentication does not allow an empty string for use as the username.

ID: 1468

Severity: ERROR
Message: The server was not able to find any user entries for the provided username of %s.

ID: 1469

Severity: ERROR
Message: The provided authorization ID %s contained an invalid DN: %s.

ID: 1470

Severity: ERROR
Message: The entry %s specified as the authorization identity does not exist.

ID: 1471

Severity: ERROR
Message: The entry %s specified as the authorization identity could not be retrieved: %s.

ID: 1472

Severity: ERROR
Message: The server was unable to find any entry corresponding to authorization ID %s.

ID: 1473

Severity: ERROR
Message: An error occurred while attempting to retrieve the clear-text password(s) for user %s in order to perform SASL %s authentication: %s.

ID: 1474

Severity: ERROR
Message: SASL %s authentication is not possible for user %s because none of the passwords in the user entry are stored in a reversible form.

ID: 1475

Severity: ERROR
Message: SASL %s protocol error: %s.

ID: 1476

Severity: ERROR
Message: The authenticating user %s does not have sufficient privileges to assume a different authorization identity.

ID: 1477

Severity: ERROR
Message: The authenticating user %s does not have sufficient access to assume a different authorization identity.

ID: 1478

Severity: ERROR
Message: The server was unable to find any entry corresponding to authentication ID %s.

ID: 1479

Severity: ERROR
Message: The server was unable to because both the ds-cfg-kdc-address and ds-cfg-realm attributes must be defined or neither defined.

ID: 1480

Severity: ERROR
Message: An error occurred while attempting to map authorization ID %s to a user entry: %s.

ID: 1481

Severity: ERROR
Message: An error occurred while attempting to write a temporary JAAS configuration file for use during GSSAPI processing: %s.

ID: 1482

Severity: ERROR
Message: An error occurred while attempting to create the JAAS login context for GSSAPI authentication: %s.

ID: 1483

Severity: INFO
Message: GSSAPI mechanism using a principal name of: %s.

ID: 1484

Severity: INFO
Message: GSSAPI SASL mechanism using a server fully qualified domain name of: %s.

ID: 1485

Severity: INFO
Message: DIGEST-MD5 SASL mechanism using a realm of: %s.

ID: 1486

Severity: NOTICE
Message: DIGEST-MD5 SASL mechanism using a server fully qualified domain name of: %s.

ID: 1487

Severity: ERROR
Message: You do not have sufficient privileges to use the proxied authorization control.

ID: 1488

Severity: ERROR
Message: ID string %s could not be mapped to exactly one user. It maps at least to both '%s' and '%s'.

ID: 1489

Severity: ERROR
Message: The internal search based on ID string %s could not be processed efficiently: %s. Check the server configuration to ensure that all associated backends are properly configured for these types of searches.

ID: 1490

Severity: ERROR
Message: An internal failure occurred while attempting to resolve ID string %s to a user entry: %s.

ID: 1491

Severity: ERROR
Message: ID string %s mapped to multiple users.

ID: 1492

Severity: ERROR
Message: An error occurred while attempting to map username %s to a Directory Server entry: %s.

ID: 1493

Severity: ERROR
Message: An error occurred while attempting to map username %s to a Directory Server entry: %s.

ID: 1494

Severity: ERROR
Message: Unable to process the cancel request because the extended operation did not include a request value.

ID: 1495

Severity: ERROR
Message: An error occurred while attempting to decode the value of the cancel extended request: %s.

ID: 1496

Severity: INFO
Message: Processing on this operation was terminated as a result of receiving a cancel request (message ID %d).

ID: 1497

Severity: ERROR
Message: Password storage scheme %s does not support use with the authentication password attribute syntax.

ID: 1498

Severity: ERROR
Message: The configured minimum password length of %d characters is greater than the configured maximum password length of %d.

ID: 1499

Severity: ERROR
Message: The provided password is shorter than the minimum required length of %d characters.

ID: 1500

Severity: ERROR
Message: The provided password is longer than the maximum allowed length of %d characters.

IDs: 1501-2000

ID: 1501

Severity: ERROR
Message: Configuration entry "%s" does not contain attribute ds-cfg-password-character-set which specifies the sets of characters that should be used when generating the password. This is a required attribute.

ID: 1502

Severity: ERROR
Message: Configuration entry "%s" contains multiple definitions for the %s character set.

ID: 1503

Severity: ERROR
Message: An error occurred while attempting to decode the value(s) of the configuration attribute ds-cfg-password-character-set, which is used to hold the character set(s) for use in generating the password: %s.

ID: 1504

Severity: ERROR
Message: The password format string "%s" references an undefined character set "%s".

ID: 1505

Severity: ERROR
Message: The password format string "%s" contains an invalid syntax. This value should be a comma-delimited sequence of elements, where each element is the name of a character set followed by a colon and the number of characters to choose at random from that character set.

ID: 1506

Severity: ERROR
Message: An error occurred while attempting to decode the value for configuration attribute ds-cfg-password-format, which is used to specify the format for the generated passwords: %s.

ID: 1507

Severity: ERROR
Message: An error occurred while attempting to get the password policy for user %s: %s.

ID: 1508

Severity: ERROR
Message: The current password must be provided for self password changes.

ID: 1509

Severity: ERROR
Message: Password modify operations that supply the user’s current password must be performed over a secure communication channel.

ID: 1510

Severity: ERROR
Message: End users are not allowed to change their passwords.

ID: 1511

Severity: ERROR
Message: Password changes must be performed over a secure communication channel.

ID: 1512

Severity: ERROR
Message: The password cannot be changed because the previous password change was too recent.

ID: 1513

Severity: ERROR
Message: The password cannot be changed because it is expired.

ID: 1514

Severity: ERROR
Message: No new password was provided, and no password generator has been defined that may be used to automatically create a new password.

ID: 1515

Severity: ERROR
Message: An error occurred while attempting to create a new password using the password generator: %s.

ID: 1516

Severity: ERROR
Message: The password policy does not allow users to supply pre-encoded passwords.

ID: 1517

Severity: ERROR
Message: The provided new password failed the validation checks defined in the server: %s.

ID: 1518

Severity: ERROR
Message: Unable to encode the provided password using the default scheme(s): %s.

ID: 1519

Severity: ERROR
Message: An error occurred while attempting to determine the identity mapper to use in conjunction with the password modify extended operation defined in configuration entry %s: %s. The password modify extended operation will not be enabled for use in the server.

ID: 1520

Severity: ERROR
Message: The provided authorization ID string "%s" could not be mapped to any user in the directory.

ID: 1521

Severity: ERROR
Message: An error occurred while attempting to map authorization ID string "%s" to a user entry: %s.

ID: 1522

Severity: NOTICE
Message: Account-Status-Notification type='%s' userdn='%s' id=%d msg='%s'.

ID: 1523

Severity: ERROR
Message: An error occurred while attempting to verify the password for user %s during SASL PLAIN authentication: %s.

ID: 1524

Severity: WARNING
Message: The password modify operation was not actually performed in the Directory Server because the LDAP no-op control was present in the request.

ID: 1525

Severity: ERROR
Message: The user account has been administratively disabled.

ID: 1526

Severity: ERROR
Message: The user account is locked.

ID: 1527

Severity: ERROR
Message: Entry %s cannot be parsed as a valid static group because it does not contain the groupOfEntries, groupOfNames or groupOfUniqueNames object classes.

ID: 1528

Severity: ERROR
Message: You do not have sufficient privileges to perform password reset operations.

ID: 1529

Severity: ERROR
Message: The provided authorization ID was empty, which is not allowed for DIGEST-MD5 authentication.

ID: 1530

Severity: ERROR
Message: The provided authorization ID %s contained an invalid DN: %s.

ID: 1531

Severity: ERROR
Message: The authenticating user %s does not have sufficient privileges to specify an alternate authorization ID.

ID: 1532

Severity: ERROR
Message: The entry corresponding to authorization DN %s does not exist in the Directory Server.

ID: 1533

Severity: ERROR
Message: An error occurred while attempting to retrieve entry %s specified as the authorization ID: %s.

ID: 1534

Severity: ERROR
Message: No entry corresponding to authorization ID %s was found in the server.

ID: 1535

Severity: ERROR
Message: An error occurred while attempting to map authorization ID %s to a user entry: %s.

ID: 1536

Severity: ERROR
Message: Could not map the provided certificate chain to a user entry because no peer certificate was available.

ID: 1537

Severity: ERROR
Message: Could not map the provided certificate chain to a user because the peer certificate was not an X.509 certificate (peer certificate format was %s).

ID: 1538

Severity: ERROR
Message: The certificate with subject %s could not be mapped to exactly one user. It maps at least to both '%s' and '%s'.

ID: 1539

Severity: ERROR
Message: Configuration entry %s has value '%s' which violates the format required for attribute mappings. The expected format is 'certattr:userattr'.

ID: 1540

Severity: ERROR
Message: Configuration entry %s contains multiple mappings for certificate attribute %s.

ID: 1541

Severity: ERROR
Message: Mapping %s in configuration entry %s references attribute %s which is not defined in the server schema.

ID: 1542

Severity: ERROR
Message: Configuration entry %s contains multiple mappings for user attribute %s.

ID: 1543

Severity: ERROR
Message: Could not map the provided certificate chain to a user entry because no peer certificate was available.

ID: 1544

Severity: ERROR
Message: Could not map the provided certificate chain to a user because the peer certificate was not an X.509 certificate (peer certificate format was %s).

ID: 1545

Severity: ERROR
Message: Unable to decode peer certificate subject %s as a DN: %s.

ID: 1546

Severity: ERROR
Message: Peer certificate subject %s does not contain any attributes for which a mapping has been established.

ID: 1547

Severity: ERROR
Message: The certificate with subject %s could not be mapped to exactly one user. It maps at least to both '%s' and '%s'.

ID: 1548

Severity: ERROR
Message: Could not map the provided certificate chain to a user entry because no peer certificate was available.

ID: 1549

Severity: ERROR
Message: Could not map the provided certificate chain to a user because the peer certificate was not an X.509 certificate (peer certificate format was %s).

ID: 1550

Severity: ERROR
Message: An error occurred while attempting to calculate the fingerprint for the peer certificate with subject %s: %s.

ID: 1551

Severity: ERROR
Message: The certificate with fingerprint '%s' could not be mapped to exactly one user. It maps at least to both '%s' and '%s'.

ID: 1552

Severity: ERROR
Message: Unable to decode value "%s" in entry "%s" as an LDAP URL: %s.

ID: 1553

Severity: ERROR
Message: Dynamic groups do not support explicitly altering their membership.

ID: 1554

Severity: WARNING
Message: Base DN %s specified in dynamic group %s does not exist in the server.

ID: 1555

Severity: ERROR
Message: An error occurred while attempting to perform an internal search with base DN %s and filter %s to resolve the member list for dynamic group %s: result code %s, error message %s.

ID: 1556

Severity: ERROR
Message: The provided password differs less than the minimum required difference of %d characters.

ID: 1557

Severity: ERROR
Message: The provided password contained too many instances of the same character appearing consecutively. The maximum number of times the same character may appear consecutively in a password is %d.

ID: 1558

Severity: ERROR
Message: The provided password does not contain enough unique characters. The minimum number of unique characters that may appear in a user password is %d.

ID: 1559

Severity: ERROR
Message: The %s attribute is not searchable and should not be included in otherwise unindexed search filters.

ID: 1560

Severity: ERROR
Message: The provided password contained a word from the server’s dictionary.

ID: 1561

Severity: ERROR
Message: The specified dictionary file %s does not exist.

ID: 1562

Severity: ERROR
Message: An error occurred while attempting to load the dictionary from file %s: %s.

ID: 1563

Severity: ERROR
Message: The provided password was found in another attribute in the user entry.

ID: 1564

Severity: ERROR
Message: The provided password contained character '%s' which is not allowed for use in passwords.

ID: 1565

Severity: ERROR
Message: The provided password did not contain enough characters from the character set '%s'. The minimum number of characters from that set that must be present in user passwords is %d.

ID: 1566

Severity: ERROR
Message: The provided character set definition '%s' is invalid because it does not contain a colon to separate the minimum count from the character set.

ID: 1567

Severity: ERROR
Message: The provided character set definition '%s' is invalid because the provided character set is empty.

ID: 1568

Severity: ERROR
Message: The provided character set definition '%s' is invalid because the value before the colon must be an integer greater or equal to zero.

ID: 1569

Severity: ERROR
Message: The provided character set definition '%s' is invalid because it contains character '%s' which has already been used.

ID: 1570

Severity: ERROR
Message: The virtual static group defined in entry %s contains multiple target group DNs, but only one is allowed.

ID: 1571

Severity: ERROR
Message: Unable to decode "%s" as the target DN for group %s: %s.

ID: 1572

Severity: ERROR
Message: The virtual static group defined in entry %s does not contain a target group definition.

ID: 1573

Severity: ERROR
Message: Target group %s referenced by virtual static group %s does not exist.

ID: 1574

Severity: ERROR
Message: Altering membership for virtual static group %s is not allowed.

ID: 1575

Severity: ERROR
Message: Virtual static group %s references target group %s which is itself a virtual static group. One virtual static group is not allowed to reference another as its target group.

ID: 1576

Severity: ERROR
Message: You do not have sufficient privileges to use the password policy state extended operation.

ID: 1577

Severity: ERROR
Message: The provided password policy state extended request did not include a request value.

ID: 1578

Severity: ERROR
Message: An unexpected error occurred while attempting to decode password policy state extended request value: %s.

ID: 1579

Severity: ERROR
Message: An unexpected error occurred while attempting to decode an operation from the password policy state extended request: %s.

ID: 1580

Severity: ERROR
Message: No value was provided for the password policy state operation intended to set the disabled state for the user. Exactly one value (either 'true' or 'false') must be given.

ID: 1581

Severity: ERROR
Message: Multiple values were provided for the password policy state operation intended to set the disabled state for the user. Exactly one value (either 'true' or 'false') must be given.

ID: 1582

Severity: ERROR
Message: The value provided for the password policy state operation intended to set the disabled state for the user was invalid. The value must be either 'true' or 'false'.

ID: 1583

Severity: ERROR
Message: Multiple values were provided for the password policy state operation intended to set the account expiration time for the user. Exactly one value must be given.

ID: 1584

Severity: ERROR
Message: The value %s provided for the password policy state operation used to set the account expiration time was invalid: %s. The value should be specified using the generalized time format.

ID: 1585

Severity: ERROR
Message: Multiple values were provided for the password policy state operation intended to set the password changed time for the user. Exactly one value must be given.

ID: 1586

Severity: ERROR
Message: The value %s provided for the password policy state operation used to set the password changed time was invalid: %s. The value should be specified using the generalized time format.

ID: 1587

Severity: ERROR
Message: Multiple values were provided for the password policy state operation intended to set the password warned time for the user. Exactly one value must be given.

ID: 1588

Severity: ERROR
Message: The value %s provided for the password policy state operation used to set the password warned time was invalid: %s. The value should be specified using the generalized time format.

ID: 1589

Severity: ERROR
Message: Multiple values were provided for the password policy state operation intended to add an authentication failure time for the user. Exactly one value must be given.

ID: 1590

Severity: ERROR
Message: The value %s provided for the password policy state operation used to update the authentication failure times was invalid: %s. The value should be specified using the generalized time format.

ID: 1591

Severity: ERROR
Message: Multiple values were provided for the password policy state operation intended to set the last login time for the user. Exactly one value must be given.

ID: 1592

Severity: ERROR
Message: The value %s provided for the password policy state operation used to set the last login time was invalid: %s. The value should be specified using the generalized time format.

ID: 1593

Severity: ERROR
Message: No value was provided for the password policy state operation intended to set the reset state for the user. Exactly one value (either 'true' or 'false') must be given.

ID: 1594

Severity: ERROR
Message: Multiple values were provided for the password policy state operation intended to set the reset state for the user. Exactly one value (either 'true' or 'false') must be given.

ID: 1595

Severity: ERROR
Message: The value provided for the password policy state operation intended to set the reset state for the user was invalid. The value must be either 'true' or 'false'.

ID: 1596

Severity: ERROR
Message: Multiple values were provided for the password policy state operation intended to add a grace login use time for the user. Exactly one value must be given.

ID: 1597

Severity: ERROR
Message: The value %s provided for the password policy state operation used to update the grace login use times was invalid: %s. The value should be specified using the generalized time format.

ID: 1598

Severity: ERROR
Message: Multiple values were provided for the password policy state operation intended to set the required change time for the user. Exactly one value must be given.

ID: 1599

Severity: ERROR
Message: The value %s provided for the password policy state operation used to set the required change time was invalid: %s. The value should be specified using the generalized time format.

ID: 1600

Severity: ERROR
Message: The password policy state extended request included an operation with an invalid or unsupported operation type of %s.

ID: 1601

Severity: WARNING
Message: An error occurred while attempting to update the password policy state information for user %s as part of a password modify extended operation (result code='%s', error message='%s').

ID: 1602

Severity: ERROR
Message: The provided new password was already contained in the password history.

ID: 1603

Severity: ERROR
Message: The Directory Server is not configured with any SMTP servers. The SMTP alert handler cannot be used unless the Directory Server is configured with information about at least one SMTP server.

ID: 1604

Severity: WARNING
Message: An error occurred when trying to send an e-mail message for administrative alert with type %s and message %s: %s.

ID: 1605

Severity: ERROR
Message: The provided match pattern "%s" could not be parsed as a regular expression: %s.

ID: 1606

Severity: ERROR
Message: The processed ID string %s could not be mapped to exactly one user. It maps at least to both '%s' and '%s'.

ID: 1607

Severity: ERROR
Message: The internal search based on processed ID string %s could not be processed efficiently: %s. Check the server configuration to ensure that all associated backends are properly configured for these types of searches.

ID: 1608

Severity: ERROR
Message: An internal failure occurred while attempting to resolve processed ID string %s to a user entry: %s.

ID: 1609

Severity: ERROR
Message: The processed ID string %s mapped to multiple users.

ID: 1610

Severity: ERROR
Message: Group instance with DN %s has been deleted and is no longer valid.

ID: 1611

Severity: ERROR
Message: The SMTP account status notification handler defined in configuration entry %s cannot be enabled unless the Directory Server is with information about one or more SMTP servers.

ID: 1612

Severity: ERROR
Message: SMTP account status notification handler configuration entry '%s' does not include any email address attribute types or recipient addresses. At least one of these must be provided.

ID: 1613

Severity: ERROR
Message: Unable to parse message subject value '%s' from configuration entry '%s' because the value does not contain a colon to separate the notification type from the subject.

ID: 1614

Severity: ERROR
Message: Unable to parse message subject value '%s' from configuration entry '%s' because '%s' is not a valid account status notification type.

ID: 1615

Severity: ERROR
Message: The message subject definitions contained in configuration entry '%s' have multiple subjects defined for notification type %s.

ID: 1616

Severity: ERROR
Message: Unable to parse message template file path value '%s' from configuration entry '%s' because the value does not contain a colon to separate the notification type from the template file path.

ID: 1617

Severity: ERROR
Message: Unable to parse message template file path value '%s' from configuration entry '%s' because '%s' is not a valid account status notification type.

ID: 1618

Severity: ERROR
Message: The message template file path definitions contained in configuration entry '%s' have multiple template file paths defined for notification type %s.

ID: 1619

Severity: ERROR
Message: The message template file '%s' referenced in configuration entry '%s' does not exist.

ID: 1620

Severity: ERROR
Message: An unclosed token was found starting at column %d of line %d.

ID: 1621

Severity: ERROR
Message: The notification-user-attr token starting at column %d of line %d references undefined attribute type %s.

ID: 1622

Severity: ERROR
Message: The notification-property token starting at column %d of line %d references undefined notification property %s.

ID: 1623

Severity: ERROR
Message: An unrecognized token %s was found at column %d of line %d.

ID: 1624

Severity: ERROR
Message: An error occurred while attempting to parse message template file '%s' referenced in configuration entry '%s': %s.

ID: 1625

Severity: INFO
Message: Directory Account Status Notification.

ID: 1626

Severity: ERROR
Message: An error occurred while attempting to send an account status notification message for notification type %s for user entry %s: %s.

ID: 1627

Severity: ERROR
Message: An error occurred while trying to encrypt a value using password storage scheme %s: %s.

ID: 1628

Severity: ERROR
Message: An error occurred while trying to decrypt a value using password storage scheme %s: %s.

ID: 1629

Severity: ERROR
Message: Cannot decode the provided symmetric key extended operation because it does not have a value.

ID: 1630

Severity: ERROR
Message: Cannot decode the provided symmetric key extended request: %s.

ID: 1631

Severity: ERROR
Message: An unexpected error occurred while attempting to decode the symmetric key extended request sequence: %s.

ID: 1632

Severity: WARNING
Message: The exact match identity mapper defined in configuration entry %s references attribute type %s which does not have an equality index defined in backend %s.

ID: 1633

Severity: WARNING
Message: The regular expression identity mapper defined in configuration entry %s references attribute type %s which does not have an equality index defined in backend %s.

ID: 1634

Severity: WARNING
Message: The subject attribute to user attribute certificate mapper defined in configuration entry %s references attribute type %s which does not have an equality index defined in backend %s.

ID: 1635

Severity: ERROR
Message: Failed to create a SASL server for SASL mechanism %s.

ID: 1636

Severity: ERROR
Message: GSSAPI SASL mechanism handler initialization failed because the keytab file %s does not exist.

ID: 1637

Severity: INFO
Message: The GSSAPI SASL mechanism handler initialization was successful.

ID: 1638

Severity: INFO
Message: The GSSAPI SASL mechanism handler has been stopped.

ID: 1639

Severity: ERROR
Message: The password value %s has been base64-decoded but is too short to be valid.

ID: 1640

Severity: ERROR
Message: The provided minimum required number of character sets '%d' is invalid because it must at least include all mandatory character sets.

ID: 1641

Severity: ERROR
Message: The provided minimum required number of character sets '%d' is invalid because it is greater than the total number of defined character sets.

ID: 1642

Severity: ERROR
Message: The provided password did not contain characters from at least %d of the following character sets or ranges: %s.

ID: 1643

Severity: ERROR
Message: SASL %s authentication is not supported for user %s because the account is not managed locally.

ID: 1644

Severity: ERROR
Message: Password modification is not supported for user %s because the account is not managed locally.

ID: 1645

Severity: ERROR
Message: The password policy state extended operation is not supported for user %s because the account is not managed locally.

ID: 1646

Severity: ERROR
Message: The user "%s" could not be authenticated using LDAP PTA policy "%s" because the following mapping attributes were not found in the user’s entry: %s.

ID: 1647

Severity: ERROR
Message: The user "%s" could not be authenticated using LDAP PTA policy "%s" because the search of base DN "%s" returned more than one entry matching the filter "%s".

ID: 1648

Severity: ERROR
Message: The user "%s" could not be authenticated using LDAP PTA policy "%s" because the search did not return any entries matching the filter "%s".

ID: 1649

Severity: ERROR
Message: The user "%s" could not be authenticated using LDAP PTA policy "%s" because the search failed unexpectedly for the following reason: %s.

ID: 1650

Severity: ERROR
Message: The user "%s" could not be authenticated using LDAP PTA policy "%s" because the bind failed unexpectedly for the following reason: %s.

ID: 1651

Severity: ERROR
Message: The configuration of LDAP PTA policy "%s" is invalid because it does not specify a means for obtaining the mapped search bind password.

ID: 1652

Severity: ERROR
Message: The certificate with subject %s mapped to multiple users.

ID: 1653

Severity: ERROR
Message: The internal search based on the certificate with subject %s could not be processed efficiently: %s. Check the server configuration to ensure that all associated backends are properly configured for these types of searches.

ID: 1654

Severity: ERROR
Message: An internal failure occurred while attempting to map the certificate with subject %s to a user entry: %s.

ID: 1655

Severity: ERROR
Message: The certificate with subject %s mapped to multiple users.

ID: 1656

Severity: ERROR
Message: The internal search based on the certificate with subject %s could not be processed efficiently: %s. Check the server configuration to ensure that all associated backends are properly configured for these types of searches.

ID: 1657

Severity: ERROR
Message: An internal failure occurred while attempting to map the certificate with subject %s to a user entry: %s.

ID: 1658

Severity: ERROR
Message: The certificate with fingerprint %s mapped to multiple users.

ID: 1659

Severity: ERROR
Message: The internal search based on the certificate with fingerprint %s could not be processed efficiently: %s. Check the server configuration to ensure that all associated backends are properly configured for these types of searches.

ID: 1660

Severity: ERROR
Message: An internal failure occurred while attempting to map the certificate with fingerprint %s to a user entry: %s.

ID: 1661

Severity: ERROR
Message: The provided password did not contain enough characters from the character range '%s'. The minimum number of characters from that range that must be present in user passwords is %d.

ID: 1662

Severity: ERROR
Message: The provided character range definition '%s' is invalid because it does not contain a colon to separate the minimum count from the character range.

ID: 1663

Severity: ERROR
Message: The provided character range definition '%s' is invalid because it does not contain a colon to separate the minimum count from the character range.

ID: 1664

Severity: ERROR
Message: The provided character range definition '%s' is invalid because the value before the colon must be an integer greater or equal to zero.

ID: 1665

Severity: ERROR
Message: The provided character range definition '%s' is invalid because the range '%s' is reversed.

ID: 1666

Severity: ERROR
Message: The provided character range definition '%s' is invalid because the range '%s' is missing the minus.

ID: 1667

Severity: ERROR
Message: The provided character range definition '%s' is invalid because the range '%s' is too short.

ID: 1668

Severity: ERROR
Message: There is no private key entry in keystore '%s' used by file based key manager provider '%s'. TLS connections which rely on this key manager provider may fail. Ensure that keystore file contains at least one private key.

ID: 1669

Severity: ERROR
Message: An error occurred while attempting to match a bcrypt hashed password value: %s.

ID: 1670

Severity: ERROR
Message: The mapped search filter template "%s" could not be parsed as a valid LDAP filter.

ID: 1671

Severity: ERROR
Message: An error occurred while trying to create a key manager factory to access the contents of LDAP keystore with base DN '%s': %s.

ID: 1672

Severity: ERROR
Message: An error occurred while trying to create a trust manager factory to access the contents of LDAP keystore with base DN '%s': %s.

ID: 1673

Severity: ERROR
Message: An error occurred while trying to create a trust manager factory to access the contents of the PKCS#11 keystore: %s.

ID: 1674

Severity: ERROR
Message: An error occurred while trying to access the PKCS#11 trust manager: %s.

ID: 1675

Severity: ERROR
Message: Unable to load JVM default keystore from system properties: %s.

ID: 1676

Severity: ERROR
Message: An error occurred while reading information contained within key manager provider from configuration: "%s".

ID: 1677

Severity: ERROR
Message: Unable to get the JVM default truststore: %s.

ID: 1678

Severity: ERROR
Message: Could not map the provided certificate chain to a user becausethe peer certificate issuer "%s" could not be decoded as an LDAP DN: %s.

ID: 1679

Severity: ERROR
Message: Could not map the provided certificate chain to a user because the matching user entry with DN '%s' does not contain an issuer DN matching the certificate issuer DN '%s'.

ID: 1680

Severity: ERROR
Message: The baseDN '%s' specified as match base DN in the exact match identity mapper defined in configuration entry '%s', does not belong to a local backend.

ID: 1681

Severity: ERROR
Message: The baseDN '%s' specified as match base DN in the regular expression identity mapper defined in configuration entry '%s', does not belong to a local backend.

ID: 1682

Severity: ERROR
Message: The processed ID string %s is mapped to multiple users.

ID: 1683

Severity: ERROR
Message: File based key manager provider '%s' failed to load content from file '%s'. TLS connections which rely on this key manager provider may fail. Ensure that keystore file contains at least one private key compatible with the security providers. Security providers available in the running JVM are '%s'. The security provider used for loading key manager will be the first in the list which is compatible with the algorithm '%s'.

ID: 1684

Severity: WARNING
Message: File based key manager provider '%s' has loaded multiple key manager from keystore file '%s'. Only one will be used for securing TLS connections which rely on this key manager provider. Security providers available in the running JVM are %s. The security provider used for loading key manager will be the first in the list which is compatible with the algorithm '%s'.

ID: 1685

Severity: ERROR
Message: File based key manager provider '%s' cannot load an X509 extended key manager from keystore file '%s'. TLS connections which rely on this key manager provider may fail. Security providers available in the running JVM are %s. The security provider used for loading key manager will be the first in the list which is compatible with the algorithm '%s'.

ID: 1686

Severity: ERROR
Message: File based key manager provider '%s' cannot load content from keystore file '%s'. TLS connections which rely on this key manager provider may fail. Restarting the server or the impacted connection handler may resolve this problem. Error detail: %s.

ID: 1687

Severity: ERROR
Message: File based trust manager provider '%s' cannot load content from truststore file '%s'. TLS connections which rely on this trust manager provider may fail. Restarting the server or the impacted connection handler may resolve this problem. Error detail: %s.

ID: 1688

Severity: ERROR
Message: File based trust manager provider '%s' failed to load content from file '%s'. TLS connections which rely on this trust manager provider may fail. Ensure that truststore file contains at least one private key compatible with the security providers. Security providers available in the running JVM are '%s'. The security provider used for loading trust manager will be the first in the list which is compatible with the algorithm '%s'.

ID: 1689

Severity: WARNING
Message: File based trust manager provider '%s' has loaded multiple trust manager from truststore file '%s'. Only one will be used for securing TLS connections which rely on this trust manager provider. Security providers available in the running JVM are %s. The security provider used for loading trust manager will be the first in the list which is compatible with the algorithm '%s'.

ID: 1690

Severity: ERROR
Message: File based trust manager provider '%s' cannot load an X509 extended trust manager from truststore file '%s'. TLS connections which rely on this trust manager provider may fail. Security providers available in the running JVM are %s. The security provider used for loading trust manager will be the first in the list which is compatible with the algorithm '%s'.

ID: 1691

Severity: ERROR
Message: The %s SCRAM password storage scheme could not be initialized because the algorithm is not supported by the JVM.

ID: 1692

Severity: ERROR
Message: An error occurred while attempting to decode the SCRAM credential value %s: %s.

ID: 1693

Severity: ERROR
Message: SASL %s authentication is not possible for user '%s' because the user entry does not contain any SCRAM credentials.

ID: 1694

Severity: ERROR
Message: An error occurred while attempting to retrieve the SCRAM credentials for user '%s' in order to perform SASL %s authentication: %s.

ID: 1695

Severity: ERROR
Message: The %s SCRAM SASL mechanism handler could not be initialized because the algorithm is not supported by the JVM.

ID: 1696

Severity: ERROR
Message: Error loading dictionary: %s.

ID: 1697

Severity: ERROR
Message: An error occurred while trying to create a trust manager factory to access the certificates in "cn=admin data": %s.

ID: 1698

Severity: ERROR
Message: '%s' cannot list the secret files in directory '%s', all the secrets will be ignored: %s.

ID: 1699

Severity: WARNING
Message: '%s' cannot read the secret file '%s': %s.

ID: 1700

Severity: ERROR
Message: The file '%s' exceeds max size '%s'.

ID: 1701

Severity: ERROR
Message: '%s' cannot decode the secret file '%s': %s.

ID: 1702

Severity: WARNING
Message: '%s' has ignored the file '%s' either because the certificate does not contain the key usage extension '%s', or because the file does not contain the appropriate key types.

ID: 1703

Severity: ERROR
Message: Invalid excluded file name pattern: %s.

ID: 1704

Severity: ERROR
Message: The Argon2 password storage scheme could not be configured because it requires %s kB of memory, exceeding the maximum available of %s kB. Configure a bigger heap or reduce the Argon2 memory requirements.

ID: 1705

Severity: ERROR
Message: An unexpected error occurred while accessing the instance keys in "cn=admin data": %s.

ID: 1706

Severity: ERROR
Message: An unexpected error occurred while attempting to read the instance key '%s' in "cn=admin data": %s.

ID: 1707

Severity: ERROR
Message: A new Argon2 password storage scheme can only be added by running dsconfig in offline mode.

ID: 1708

Severity: INFO
Message: %s.

ID: 1709

Severity: INFO
Message: %s with exception: %s.

ID: 1710

Severity: ERROR
Message: Error occurred while writing log record for logger %s: %s. Any further write errors will be ignored.

ID: 1711

Severity: ERROR
Message: Error occurred while opening log file %s for logger %s: %s.

ID: 1712

Severity: ERROR
Message: Error occurred while closing log file for logger %s: %s.

ID: 1713

Severity: ERROR
Message: Error occurred while flushing writer buffer for logger %s: %s.

ID: 1714

Severity: WARNING
Message: Invalid error log severity "%s".

ID: 1715

Severity: WARNING
Message: Invalid error log category "%s".

ID: 1716

Severity: WARNING
Message: Invalid override of severity level "%s".

ID: 1717

Severity: WARNING
Message: Error occurred while setting file permissions for the log file %s: %s.

ID: 1718

Severity: WARNING
Message: This platform does not support setting file permissions %s to the log file %s.

ID: 1719

Severity: ERROR
Message: Error occurred while listing log files named by policy with initial file name %s.

ID: 1720

Severity: ERROR
Message: Error occurred while obtaining free disk space in the partition containing log file %s: %s.

ID: 1721

Severity: ERROR
Message: Error occurred while enforcing retention policy %s for logger %s: %s.

ID: 1722

Severity: ERROR
Message: Error while creating or updating common audit log publisher %s: %s.

ID: 1723

Severity: ERROR
Message: Error while adding common audit log publisher %s, the publisher has an unsupported handler type.

ID: 1724

Severity: ERROR
Message: Error while reading JSON configuration file %s while creating common audit external log publisher %s: %s.

ID: 1725

Severity: ERROR
Message: Error while creating common audit external log publisher %s: %s.

ID: 1726

Severity: ERROR
Message: Error while creating common audit log publisher %s: %s.

ID: 1727

Severity: ERROR
Message: Error while adding common audit log publisher %s, the publisher defines an unsupported log rotation policy %s.

ID: 1728

Severity: ERROR
Message: Error while adding common audit log publisher %s, the publisher defines an unsupported log retention policy %s.

ID: 1729

Severity: ERROR
Message: Error while processing common audit log publisher %s, this type of log publisher is unsupported.

ID: 1730

Severity: ERROR
Message: Error while processing common audit log publisher %s, delimiter char '%s' should not contain more than one character.

ID: 1731

Severity: ERROR
Message: Error while processing common audit log publisher %s, quote char '%s' should not contain more than one character.

ID: 1732

Severity: ERROR
Message: Error while processing common audit log publisher %s, time of the day value '%s' for fixed time log rotation policy is not valid, it should use a 24-hour format "HHmm" : %s.

ID: 1733

Severity: ERROR
Message: Error while processing a log event for common audit: %s.

ID: 1734

Severity: ERROR
Message: Error while processing common audit log publisher %s, the keystore pin file %s is missing.

ID: 1735

Severity: ERROR
Message: Error while processing common audit log publisher %s, the keystore pin file %s could not be read: %s.

ID: 1736

Severity: ERROR
Message: Error while processing common audit log publisher %s, the keystore pin file %s contains an empty pin.

ID: 1737

Severity: ERROR
Message: Error while processing common audit log publisher %s, the keystore file %s is missing.

ID: 1738

Severity: ERROR
Message: Error while processing common audit log publisher %s, the keystore file %s could not be read: %s.

ID: 1739

Severity: ERROR
Message: Error while processing common audit log publisher %s, the keystore file %s is empty.

ID: 1740

Severity: ERROR
Message: The log file %s unexpectedly disappeared. It looks like an external system is also trying to manage the log files retention (either deleting or moving files away). This system configuration is incorrect: either ForgeRock DS manages the log file retention OR the external system does. Pick one only.

ID: 1741

Severity: ERROR
Message: The message with ID %d has been generated %d times in the last second: %s.

ID: 1742

Severity: WARNING
Message: Invalid error log severity "%s", only one severity must be provided, the highest one at which logging should occur.

ID: 1743

Severity: ERROR
Message: The LDAP attribute description list plugin instance defined in configuration entry %s does not list any plugin types. This plugin must be configured to operate as a pre-parse search plugin.

ID: 1744

Severity: ERROR
Message: The LDAP attribute description list plugin instance defined in configuration entry %s lists an invalid plugin type %s. This plugin can only be used as a pre-parse search plugin.

ID: 1745

Severity: ERROR
Message: The startup plugin defined in configuration entry %s threw an exception when it was invoked during the Directory Server startup process: %s. The server startup process has been aborted.

ID: 1746

Severity: ERROR
Message: The startup plugin defined in configuration entry %s returned a null value when it was invoked during the Directory Server startup process. This is an illegal return value, and the server startup process has been aborted.

ID: 1747

Severity: ERROR
Message: The startup plugin defined in configuration entry %s encountered an error when it was invoked during the Directory Server startup process: %s (error ID %d). The server startup process has been aborted.

ID: 1748

Severity: ERROR
Message: The shutdown plugin defined in configuration entry %s threw an exception when it was invoked during the Directory Server shutdown process: %s.

ID: 1749

Severity: ERROR
Message: The post-connect plugin defined in configuration entry %s threw an exception when it was invoked for connection %d from %s: %s. The connection will be terminated.

ID: 1750

Severity: ERROR
Message: The post-connect plugin defined in configuration entry %s returned null when invoked for connection %d from %s. This is an illegal response, and the connection will be terminated.

ID: 1751

Severity: ERROR
Message: The post-disconnect plugin defined in configuration entry %s threw an exception when it was invoked for connection %d from %s: %s.

ID: 1752

Severity: ERROR
Message: The post-disconnect plugin defined in configuration entry %s returned null when invoked for connection %d from %s. This is an illegal response.

ID: 1753

Severity: ERROR
Message: The pre-parse %s plugin defined in configuration entry %s threw an exception when it was invoked for connection %d operation %d: %s. Processing on this operation will be terminated.

ID: 1754

Severity: ERROR
Message: The pre-parse %s plugin defined in configuration entry %s returned null when invoked for connection %d operation %d. This is an illegal response, and processing on this operation will be terminated.

ID: 1755

Severity: ERROR
Message: The pre-operation %s plugin defined in configuration entry %s threw an exception when it was invoked for connection %d operation %d: %s. Processing on this operation will be terminated.

ID: 1756

Severity: ERROR
Message: The pre-operation %s plugin defined in configuration entry %s returned null when invoked for connection %d operation %d. This is an illegal response, and processing on this operation will be terminated.

ID: 1757

Severity: ERROR
Message: The post-operation %s plugin defined in configuration entry %s threw an exception when it was invoked for connection %d operation %d: %s. Processing on this operation will be terminated.

ID: 1758

Severity: ERROR
Message: The post-operation %s plugin defined in configuration entry %s returned null when invoked for connection %d operation %d. This is an illegal response, and processing on this operation will be terminated.

ID: 1759

Severity: ERROR
Message: The post-response %s plugin defined in configuration entry %s threw an exception when it was invoked for connection %d operation %d: %s. Processing on this operation will be terminated.

ID: 1760

Severity: ERROR
Message: The post-response %s plugin defined in configuration entry %s returned null when invoked for connection %d operation %d. This is an illegal response, and processing on this operation will be terminated.

ID: 1761

Severity: ERROR
Message: The search result entry plugin defined in configuration entry %s threw an exception when it was invoked for connection %d operation %d with entry %s: %s. Processing on this search operation will be terminated.

ID: 1762

Severity: ERROR
Message: The search result entry plugin defined in configuration entry %s returned null when invoked for connection %d operation %d with entry %s. This is an illegal response, and processing on this search operation will be terminated.

ID: 1763

Severity: ERROR
Message: The search result reference plugin defined in configuration entry %s threw an exception when it was invoked for connection %d operation %d with referral URL(s) %s: %s. Processing on this search operation will be terminated.

ID: 1764

Severity: ERROR
Message: The search result reference plugin defined in configuration entry %s returned null when invoked for connection %d operation %d with referral URL(s) %s. This is an illegal response, and processing on this search operation will be terminated.

ID: 1765

Severity: ERROR
Message: An attempt was made to register the LastMod plugin to be invoked as a %s plugin. This plugin type is not allowed for this plugin.

ID: 1766

Severity: ERROR
Message: The LDIF import plugin defined in configuration entry %s threw an exception when it was invoked on entry %s: %s.

ID: 1767

Severity: ERROR
Message: The LDIF import plugin defined in configuration entry %s returned null when invoked on entry %s. This is an illegal response.

ID: 1768

Severity: ERROR
Message: An attempt was made to register the EntryUUID plugin to be invoked as a %s plugin. This plugin type is not allowed for this plugin.

ID: 1769

Severity: ERROR
Message: An attempt was made to register the password policy import plugin to be invoked as a %s plugin. This plugin type is not allowed for this plugin.

ID: 1770

Severity: ERROR
Message: An error occurred while attempting to encode a password value stored in attribute %s of user entry %s: %s. Password values for this user will not be encoded.

ID: 1771

Severity: ERROR
Message: The plugin defined in configuration entry %s does not support the %s plugin type.

ID: 1772

Severity: ERROR
Message: The password policy import plugin is not configured any default auth password schemes, and the server does not support the %s auth password scheme.

ID: 1773

Severity: ERROR
Message: Auth password storage scheme %s referenced by the password policy import plugin is not configured for use in the server.

ID: 1774

Severity: ERROR
Message: The password policy import plugin is not configured any default user password schemes, and the server does not support the %s auth password scheme.

ID: 1775

Severity: ERROR
Message: User password storage scheme %s referenced by the password policy import plugin is not configured for use in the server.

ID: 1776

Severity: WARNING
Message: Entry '%s' indicates that it uses custom password policy '%s', but no such policy is defined in the server. Any passwords contained in the entry will be encoded using the default storage schemes, but authentication as this user might not be possible.

ID: 1777

Severity: WARNING
Message: An error occurred while attempting to decode the value of the custom password policy attribute in entry '%s': %s. Any passwords contained in the entry will be encoded using the default storage schemes, but authentication as this user might not be possible.

ID: 1778

Severity: ERROR
Message: The subordinate modify DN plugin defined in configuration entry %s threw an exception when it was invoked for connection %d operation %d: %s. Processing on this operation will be terminated.

ID: 1779

Severity: ERROR
Message: The subordinate modify DN plugin defined in configuration entry %s returned null when invoked for connection %d operation %s. This is an illegal response, and processing on this operation will be terminated.

ID: 1780

Severity: ERROR
Message: An attempt was made to register the Unique Attribute plugin to be invoked as a %s plugin. This plugin type is not allowed for this plugin.

ID: 1781

Severity: ERROR
Message: An attempt was made to register the Referential Integrity plugin to be invoked as a %s plugin. This plugin type is not allowed for this plugin.

ID: 1782

Severity: ERROR
Message: An error occurred during Referential Integrity plugin initialization because log file creation failed: %s.

ID: 1783

Severity: ERROR
Message: An error occurred closing the Referential Integrity plugin update log file: %s.

ID: 1784

Severity: ERROR
Message: An error occurred replacing the Referential Integrity plugin update log file: %s.

ID: 1785

Severity: INFO
Message: The file name that the Referential Integrity plugin logs changes to during background processing has been changed from %s to %s, but this change will not take effect until the server is restarted.

ID: 1786

Severity: INFO
Message: The Referential Integrity plugin background processing update interval has been changed from %s to %s, the new value will now be during background processing.

ID: 1787

Severity: INFO
Message: The Referential Integrity plugin background processing has been stopped.

ID: 1788

Severity: INFO
Message: The Referential Integrity plugin has started background processing using the update interval %s.

ID: 1789

Severity: ERROR
Message: The Referential Integrity plugin failed when performing an internal search: %s.

ID: 1790

Severity: ERROR
Message: The Referential Integrity plugin failed when performing an internal modify on entry %s: %s.

ID: 1791

Severity: ERROR
Message: The Referential Integrity plugin failed to decode a entry DN from the update log: %s.

ID: 1792

Severity: INFO
Message: The Referential Integrity plugin failed when performing a search because the base DN %s does not exist.

ID: 1793

Severity: ERROR
Message: An error occurred in the Referential Integrity plugin while attempting to configure the attribute type %s which has a syntax OID of %s. A Referential Integrity attribute type must have a syntax OID of either 1.3.6.1.4.1.1466.115.121.1.12 (for the distinguished name syntax) or 1.3.6.1.4.1.1466.115.121.1.34 (for the name and optional uid syntax) or 1.3.6.1.4.1.36733.2.1.3.12 (for the name and json syntax).

ID: 1794

Severity: ERROR
Message: The 7-bit clean plugin is configured with invalid plugin type %s. Only the ldifImport, preOperationAdd, preOperationModify, and preOperationModifyDN plugin types are allowed.

ID: 1795

Severity: ERROR
Message: The modify DN operation would have resulted in a value for attribute %s that was not 7-bit clean.

ID: 1796

Severity: ERROR
Message: The entry included a value for attribute %s that was not 7-bit clean.

ID: 1797

Severity: ERROR
Message: The password policy import plugin references default auth password storage scheme %s which is not available for use in the server.

ID: 1798

Severity: ERROR
Message: The post-synchronization %s plugin defined in configuration entry %s threw an exception when it was invoked for connection %d operation %d: %s.

ID: 1799

Severity: ERROR
Message: A unique attribute conflict was detected for attribute %s: value %s already exists in entry %s.

ID: 1800

Severity: ERROR
Message: A unique attribute conflict was detected for attribute %s during synchronization (connID=%d, opID=%d): value %s in entry %s conflicts with an existing value in entry %s. Manual interaction is required to eliminate the conflict.

ID: 1801

Severity: ERROR
Message: An internal error occurred while attempting to determine whether the operation would have resulted in a unique attribute conflict (result %s, message %s).

ID: 1802

Severity: ERROR
Message: An internal error occurred while attempting to determine whether the synchronization operation (connID=%d, opID=%d) for entry %s would have resulted in a unique attribute conflict (result %s, message %s).

ID: 1803

Severity: ERROR
Message: The referential integrity plugin defined in configuration entry %s is configured to operate on attribute %s but there is no equality index defined for this attribute in backend %s.

ID: 1804

Severity: ERROR
Message: The unique attribute plugin defined in configuration entry %s is configured to operate on attribute %s but there is no equality index defined for this attribute in backend %s.

ID: 1805

Severity: ERROR
Message: An attempt was made to register the Change Number Control plugin to be invoked as a %s plugin. This plugin type is not allowed for this plugin.

ID: 1806

Severity: ERROR
Message: An attempt was made to register the Change Number Control plugin with the following plugin types : %s. However this plugin must be configured with all of the following plugin types : %s.

ID: 1807

Severity: ERROR
Message: The subordinate delete plugin defined in configuration entry %s threw an exception when it was invoked for connection %d operation %d: %s. Processing on this operation will be terminated.

ID: 1808

Severity: ERROR
Message: The subordinate delete plugin defined in configuration entry %s returned null when invoked for connection %d operation %s. This is an illegal response, and processing on this operation will be terminated.

ID: 1809

Severity: ERROR
Message: An attempt was made to register the Samba password synchronization plugin to be invoked as a %s plugin. This plugin type is not allowed for this plugin.

ID: 1810

Severity: ERROR
Message: The Samba password synchronization plugin could not encode a password for the following reasons: %s.

ID: 1811

Severity: ERROR
Message: The Samba password synchronization plugin could not process a modification for the following reason: %s.

ID: 1812

Severity: ERROR
Message: Invalid plugin type '%s' for the Attribute Cleanup plugin.

ID: 1813

Severity: ERROR
Message: Attribute '%s' is not defined in the directory schema.

ID: 1814

Severity: ERROR
Message: The attribute '%s' has already been defined in the configuration.

ID: 1815

Severity: ERROR
Message: The mapping '%s:%s' maps the attribute to itself.

ID: 1816

Severity: ERROR
Message: The property 'check-references-filter-criteria' specifies filtering criteria for attribute '%s', but this attribute is not listed in the 'attribute-type' property.

ID: 1817

Severity: ERROR
Message: The filtering criteria '%s' specified in property 'check-references-filter-criteria' is invalid because the filter could not be decoded: '%s'.

ID: 1818

Severity: ERROR
Message: The entry referenced by the value '%s' of the attribute '%s' in the entry '%s' does not exist in any of the configured naming contexts.

ID: 1819

Severity: ERROR
Message: The entry referenced by the value '%s' of the attribute '%s' in the entry '%s' does not match the filter '%s'.

ID: 1820

Severity: ERROR
Message: The entry referenced by the value '%s' of the attribute '%s' in the entry '%s' does not belong to any of the configured naming contexts.

ID: 1821

Severity: ERROR
Message: The operation could not be processed due to an unexpected exception: '%s'.

ID: 1822

Severity: ERROR
Message: An attempt was made to register the Graphite Monitor Reporter Plugin plugin to be invoked as a %s plugin. This plugin type is not allowed for this plugin.

ID: 1823

Severity: ERROR
Message: Unable to report metrics to Graphite server '%s' because the Graphite server hostname resolution has failed. Ensure that the plugin configuration is correct and that the Graphite server is reachable. The Graphite plugin will be disabled until a change is performed in its configuration or the server restart.

ID: 1824

Severity: ERROR
Message: The referential integrity plugin defined in configuration entry %s is configured to operate on attribute %s but there is no %s extensible matching rule index defined for this attribute in backend %s.

ID: 1825

Severity: ERROR
Message: An attempt was made to register the Entity Tag plugin to be invoked as a %s plugin. This plugin type is not allowed for this plugin.

ID: 1826

Severity: ERROR
Message: The post-commit %s plugin defined in configuration entry %s threw an exception when it was invoked for connection %d operation %d: %s.

ID: 1827

Severity: ERROR
Message: The server attempted to send a response to the %s operation (conn=%d, op=%d), but the operation did not have a result code. This could indicate that the operation did not complete properly or that it is one that is not allowed to have a response. Using a generic 'Operations Error' response.

ID: 1828

Severity: ERROR
Message: The server attempted to send a response to the %s operation (conn=%d, op=%d), but this type of operation is not allowed to have responses. Backtrace: %s.

ID: 1829

Severity: INFO
Message: The Directory Server is closing the connection to this client.

ID: 1830

Severity: WARNING
Message: The Directory Server is currently in the process of closing this client connection.

ID: 1831

Severity: ERROR
Message: The connection attempt from client %s to %s has been rejected because the client was included in one of the denied address ranges.

ID: 1832

Severity: ERROR
Message: The connection attempt from client %s to %s has been rejected because the client was not included in one of the allowed address ranges.

ID: 1833

Severity: INFO
Message: An internal error prevented the Directory Server from properly registering the client connection from %s to %s with an appropriate request handler: %s.

ID: 1834

Severity: ERROR
Message: Terminating this connection because the client sent an invalid message of type %s (LDAP message ID %d) that is not allowed for request messages.

ID: 1835

Severity: ERROR
Message: An unexpected failure occurred while trying to process a request of type %s (LDAP message ID %d): %s. The client connection will be terminated.

ID: 1836

Severity: ERROR
Message: This client connection is being terminated because a protocol error occurred while trying to process a bind request. The LDAP message ID was %d and the error message for the bind response was %s.

ID: 1837

Severity: ERROR
Message: An extended response message would have been sent to an LDAPv2 client (connection ID=%d, operation ID=%d): %s. LDAPv2 does not allow extended operations, so this response will not be sent.

ID: 1838

Severity: ERROR
Message: A search performed by an LDAPv2 client (connection ID=%d, operation ID=%d) would have included a search result reference %s. Referrals are not allowed for LDAPv2 clients, so this search reference will not be sent.

ID: 1839

Severity: ERROR
Message: The original result code for this message was 10 but this result is not allowed for LDAPv2 clients.

ID: 1840

Severity: ERROR
Message: The response included one or more referrals, which are not allowed for LDAPv2 clients. The referrals included were: %s.

ID: 1841

Severity: ERROR
Message: The Directory Server has been configured to deny access to LDAPv2 clients. This connection will be closed.

ID: 1842

Severity: ERROR
Message: The client with connection ID %d authenticated to the Directory Server using LDAPv2, but attempted to send an extended operation request (LDAP message ID %d), which is not allowed for LDAPv2 clients. The connection will be terminated.

ID: 1843

Severity: ERROR
Message: The attempt to register this connection with the Directory Server was rejected. This indicates that the server already has the maximum allowed number of concurrent connections established.

ID: 1844

Severity: INFO
Message: You have to rebuild the '%s' index(es) manually to get a fully functional server.

ID: 1845

Severity: NOTICE
Message: Started listening for new connections on %s.

ID: 1846

Severity: NOTICE
Message: Stopped listening for new connections on %s.

ID: 1847

Severity: ERROR
Message: User %s specified in the proxied authorization V1 control does not exist in the Directory Server.

ID: 1848

Severity: ERROR
Message: Unable to process proxied authorization V2 control because it contains an authorization ID based on a username and no proxied authorization identity mapper is configured in the Directory Server.

ID: 1849

Severity: ERROR
Message: The authorization ID "%s" contained in the proxied authorization V2 control is invalid because it does not start with "dn:" to indicate a user DN or "u:" to indicate a username.

ID: 1850

Severity: ERROR
Message: User %s specified in the proxied authorization V2 control does not exist in the Directory Server.

ID: 1851

Severity: WARNING
Message: The Directory Server is already processing another request on the same client connection with the same message ID of %d.

ID: 1852

Severity: ERROR
Message: Use of the proxied authorization V1 control for user %s is not allowed by the password policy configuration.

ID: 1853

Severity: INFO
Message: Unable to process the provided server-side sort request control because it included attribute %s which does not have a default ordering matching rule and no ordering rule was specified in the sort key.

ID: 1854

Severity: ERROR
Message: LDAPv2 clients are not allowed to use request controls.

ID: 1855

Severity: ERROR
Message: You do not have sufficient privileges to perform search operations through JMX.

ID: 1856

Severity: ERROR
Message: You do not have sufficient privileges to establish the connection through JMX. At least JMX_READ privilege is required.

ID: 1857

Severity: ERROR
Message: User %s does not exist in the directory.

ID: 1858

Severity: WARNING
Message: The value %s specified as the LDIF directory path for the LDIF connection handler defined in configuration entry %s exists but is not a directory. The specified path must be a directory. The LDIF connection handler will start, but will not be able to proces any changes until this path is changed to a directory.

ID: 1859

Severity: WARNING
Message: The directory %s referenced by the LDIF connection handler defined in configuration entry %s does not exist. The LDIF connection handler will start, but will not be able to process any changes until this directory is created.

ID: 1860

Severity: ERROR
Message: An error occurred while trying to read a change record from the LDIF file: %s. This change will be skipped but processing on the LDIF file will continue.

ID: 1861

Severity: ERROR
Message: An error occurred while trying to read a change record from the LDIF file: %s. No further processing on this LDIF file can be performed.

ID: 1862

Severity: INFO
Message: Result Code: %d (%s).

ID: 1863

Severity: INFO
Message: Additional Info: %s.

ID: 1864

Severity: INFO
Message: Matched DN: %s.

ID: 1865

Severity: INFO
Message: Referral URL: %s.

ID: 1866

Severity: ERROR
Message: An I/O error occurred while the LDIF connection handler was processing LDIF file %s: %s.

ID: 1867

Severity: ERROR
Message: An error occurred while the LDIF connection handler was attempting to rename partially-processed file from %s to %s: %s.

ID: 1868

Severity: ERROR
Message: An error occurred while the LDIF connection handler was attempting to delete processed file %s: %s.

ID: 1869

Severity: ERROR
Message: An error occurred while attempting to initialize the SSL context for use in the LDAP Connection Handler: %s.

ID: 1870

Severity: ERROR
Message: The Directory Server does not support LDAP protocol version %d. This connection will be closed.

ID: 1871

Severity: ERROR
Message: Cannot decode the provided control %s because an error occurred while attempting to decode the control value: %s.

ID: 1872

Severity: ERROR
Message: Cannot decode the provided entry changelog notification control because it does not have a value.

ID: 1873

Severity: ERROR
Message: Cannot decode the provided entry changelog notification control because an error occurred while attempting to decode the control value: %s.

ID: 1874

Severity: INFO
Message: Connection handler '%s' does not specify the number of request handler threads: defaulting to %d threads.

ID: 1875

Severity: ERROR
Message: The server received configuration changes that require a restart of the %s connection handler to take effect.

ID: 1876

Severity: ERROR
Message: Authorization as '%s' specified in the proxied authorization control is not permitted.

ID: 1877

Severity: ERROR
Message: The key with alias '%s' used by '%s' could not be found, which may cause subsequent SSL connections to fail. Verify that the underlying keystore is properly configured.

ID: 1878

Severity: ERROR
Message: No usable key was found for '%s', which may cause subsequent SSL connections to fail. Verify that the underlying keystore is properly configured.

ID: 1879

Severity: ERROR
Message: Use of the proxied authorization V2 control for user %s is not allowed: the account is disabled.

ID: 1880

Severity: ERROR
Message: Use of the proxied authorization V2 control for user %s is not allowed: the account is expired.

ID: 1881

Severity: ERROR
Message: Use of the proxied authorization V2 control for user %s is not allowed: the account is locked.

ID: 1882

Severity: ERROR
Message: Use of the proxied authorization V2 control for user %s is not allowed: the account’s password is expired.

ID: 1889

Severity: ERROR
Message: Unable to process the provided internal modifications request control because it did not contain an origin.

ID: 1890

Severity: ERROR
Message: Unable to process the provided internal modifications request control because it did not contain modifications.

ID: 1891

Severity: ERROR
Message: Unable to process the provided replication context request control because it did not contain a CSN.

ID: 1892

Severity: ERROR
Message: Unable to process the provided replication context request control because it did not contain an entry UUID.

ID: 1893

Severity: ERROR
Message: Unable to process request '%s' received for HTTP client connection: %s.

ID: 1894

Severity: ERROR
Message: Unable to process request '%s' received for internal client connection: %s.

ID: 1895

Severity: ERROR
Message: No result received after completion for request '%s' received for internal client connection.

ID: 1896

Severity: INFO
Message: Internal operations can’t be cancelled.

ID: 1897

Severity: ERROR
Message: Unable to process request '%s' received for JMX client because this type of request is not supported for JMX.

ID: 1898

Severity: ERROR
Message: Unable to process response received for JMX client connection for request '%s' because the response '%s' is not of any of the expected types.

ID: 1899

Severity: ERROR
Message: No result received after completion for request '%s' received for JMX client connection.

ID: 1900

Severity: ERROR
Message: Unable to process request '%s' received for JMX client connection: %s.

ID: 1901

Severity: ERROR
Message: User authentication is mandatory to access server monitoring information.

ID: 1902

Severity: ERROR
Message: Could not write data to the client for %s.

ID: 1903

Severity: ERROR
Message: The connection attempt from client %s to %s has been rejected because there are too many open connections from this client.

ID: 1904

Severity: ERROR
Message: Unable to process the provided server-side sort request control: %s.

ID: 1905

Severity: ERROR
Message: An error occurred during multi-stage authentication: '%s'.

ID: 1906

Severity: ERROR
Message: Unable to process HTTP request '%s': %s.

ID: 1907

Severity: ERROR
Message: Unable to write HTTP response to the client '%s': %s.

ID: 1908

Severity: ERROR
Message: Error while starting the HTTP application: %s.

ID: 1909

Severity: ERROR
Message: cancel() invoked.

ID: 1910

Severity: ERROR
Message: JMX connection %s with JMX connection ID '%s' has been disconnected because it was finalized by GC.

ID: 1911

Severity: ERROR
Message: JMX connection %s with JMX connection ID '%s' has been disconnected because it received a '%s' notification.

ID: 1912

Severity: ERROR
Message: LDAP connection %s has been closed because the LDAP connection handler %s is shutting down.

ID: 1913

Severity: ERROR
Message: The key with alias '%s' used by '%s' is not valid yet. The key will be used, but SSL connections may fail depending on the validation performed by the peer. Verify that the underlying keystore is properly configured with a valid key.

ID: 1914

Severity: ERROR
Message: The key with alias '%s' used by '%s' has expired. The key will be used, but SSL connections may fail depending on the validation performed by the peer. Verify that the underlying keystore is properly configured with a valid key.

ID: 1915

Severity: ERROR
Message: The connection attempt from client '%s' to '%s' has been rejected because the proxy protocol header indicated that the client used SSL but the header does not specify which SSL cipher was used. The proxy should be configured to transmit all SSL headers.

ID: 1916

Severity: ERROR
Message: The configured DN is already used by another domain.

ID: 1917

Severity: ERROR
Message: Replication Server failed to start : could not bind to the listen port : %d. Error : %s.

ID: 1918

Severity: ERROR
Message: Unknown operation type : %s.

ID: 1919

Severity: ERROR
Message: Internal Error : Operation %s change number %s was not found in local change list.

ID: 1920

Severity: ERROR
Message: Internal Error : Operation %s change number %s was not found in remote change list.

ID: 1921

Severity: ERROR
Message: The replication server failed to start because the database %s could not be read : %s.

ID: 1922

Severity: ERROR
Message: An Exception was caught while replaying operation %s %s (%s) : %s.

ID: 1923

Severity: NOTICE
Message: Error %s when updating server state %s : %s base dn : %s.

ID: 1924

Severity: ERROR
Message: Error %s when searching for server state %s : %s base dn : %s.

ID: 1925

Severity: ERROR
Message: Caught IOException while sending topology info (for update) on domain %s for %s server %s : %s.

ID: 1926

Severity: ERROR
Message: Error when searching old changes from the database for base DN %s: %s.

ID: 1927

Severity: ERROR
Message: Error trying to replay %s, operation could not be decoded: %s.

ID: 1928

Severity: ERROR
Message: Error during the Replication Server database trimming or flush process. The Changelog service is going to shutdown: %s.

ID: 1929

Severity: ERROR
Message: An unexpected error happened handling connection with %s. This connection is going to be closed.

ID: 1930

Severity: ERROR
Message: A loop was detected while replaying operation: %s %s (%s) error %s.

ID: 1931

Severity: ERROR
Message: An Exception was caught while testing existence or trying to create the directory for the Replication Server database : %s %s.

ID: 1932

Severity: ERROR
Message: The current request is rejected due to an import or an export already in progress for the same data.

ID: 1933

Severity: ERROR
Message: On domain %s, initialization of server with serverId:%s has been requested from a server with an invalid serverId:%s. %s.

ID: 1934

Severity: ERROR
Message: Invalid target for the export.

ID: 1935

Severity: ERROR
Message: Domain %s: the server with serverId=%s is unreachable.

ID: 1936

Severity: ERROR
Message: No domain matches the provided base DN '%s'.

ID: 1937

Severity: ERROR
Message: Multiple domains match the base DN provided.

ID: 1938

Severity: ERROR
Message: The provider class does not allow the operation requested.

ID: 1939

Severity: NOTICE
Message: Exception when reading messages from %s: %s.

ID: 1940

Severity: ERROR
Message: Duplicate server IDs found: replica '%s' for domain '%s' tried to connect from '%s', but replica '%s' is already connected from '%s'. Make sure the two replicas are configured with different server IDs.

ID: 1941

Severity: ERROR
Message: Duplicate server IDs found: replication server '%s' tried to connect from '%s', but replication server '%s' is already connected from '%s'. Make sure the two replication servers are configured with different server IDs.

ID: 1942

Severity: ERROR
Message: Entry %s was containing some unknown historical information, This may cause some inconsistency for this entry.

ID: 1943

Severity: ERROR
Message: A conflict was detected but the conflict information could not be added to entry %s. Conflict with %s %s, Result: %s.

ID: 1944

Severity: ERROR
Message: An error happened trying to rename a conflicting entry. DN: %s, Operation: %s, Result: %s.

ID: 1945

Severity: ERROR
Message: The Replication is configured for suffix %s but was not able to connect to any Replication Server.

ID: 1946

Severity: ERROR
Message: An unexpected error occurred while sending an Error Message to %s. This connection is going to be closed and reopened.

ID: 1947

Severity: ERROR
Message: An unexpected error occurred while sending a Message to %s. This connection is going to be closed and reopened.

ID: 1948

Severity: ERROR
Message: Could not replay operation %s %s with ChangeNumber %s error %s %s.

ID: 1949

Severity: ERROR
Message: The entry %s has historical information for attribute %s which is not defined in the schema. This information will be ignored.

ID: 1950

Severity: ERROR
Message: The Replication Server socket could not be closed : %s.

ID: 1951

Severity: ERROR
Message: The thread listening on the replication server port could not be stopped : %s.

ID: 1952

Severity: ERROR
Message: An unexpected error occurred when loading the generation id of domain "%s": %s.

ID: 1953

Severity: ERROR
Message: An unexpected error occurred when looking for the replicated backend : %s. It may be not configured or disabled.

ID: 1954

Severity: ERROR
Message: An unexpected error occurred when searching in %s for the generation ID : %s.

ID: 1955

Severity: ERROR
Message: An unexpected error occurred when updating generation ID for domain "%s": %s.

ID: 1956

Severity: ERROR
Message: The following error has been received : %s.

ID: 1957

Severity: ERROR
Message: Initialization cannot be done because import is not supported by the backend %s.

ID: 1958

Severity: ERROR
Message: Initialization cannot be done because export is not supported by the backend %s.

ID: 1959

Severity: ERROR
Message: Initialization cannot be done because the following error occurred while locking the backend %s : %s.

ID: 1960

Severity: ERROR
Message: Replication server caught exception while listening for client connections: %s.

ID: 1961

Severity: ERROR
Message: While clearing the database %s, the following error happened: %s.

ID: 1962

Severity: ERROR
Message: An unexpected error occurred when testing existence or creating the replication backend : %s.

ID: 1963

Severity: ERROR
Message: An error occurred when searching for %s : %s.

ID: 1964

Severity: ERROR
Message: The base DN %s is not stored by any of the Directory Server backend.

ID: 1965

Severity: ERROR
Message: An Exception was caught while replaying replication message : %s.

ID: 1966

Severity: ERROR
Message: Caught exception publishing fake operations for domain %s : %s.

ID: 1967

Severity: NOTICE
Message: ServerState recovery for domain %s, updated with changeNumber %s.

ID: 1968

Severity: ERROR
Message: For replicated domain %s, in server with serverId=%s, the generation ID could not be set to value %s in the rest of the topology because this server is NOT connected to any replication server. You should check in the configuration that the domain is enabled and that there is one replication server up and running.

ID: 1969

Severity: ERROR
Message: DN sent by remote replication server: %s does not match local replication server one: %s.

ID: 1970

Severity: ERROR
Message: DN sent by replication server: %s does not match local directory server one: %s.

ID: 1971

Severity: ERROR
Message: Caught IOException while forwarding ResetGenerationIdMsg to peer replication servers for domain %s : %s.

ID: 1972

Severity: ERROR
Message: Replication server received invalid initial status: %s for replication domain %s from server id %s.

ID: 1973

Severity: ERROR
Message: Received invalid requested status %s in DS replication domain %s with server id %s.

ID: 1974

Severity: ERROR
Message: Could not compute new status in RS replication domain %s for server id %s. Was in %s status and received %s event.

ID: 1975

Severity: ERROR
Message: Could not compute new status in DS replication domain %s with server id %s. Was in %s status and received %s event.

ID: 1976

Severity: ERROR
Message: Caught IOException while changing status for domain %s and serverId: %s after reset for generation id: %s.

ID: 1977

Severity: ERROR
Message: Received change status message does not come from a directory server (dn: %s, server id: %s, msg: %s).

ID: 1978

Severity: ERROR
Message: Received invalid new status %s in RS for replication domain %s and directory server id %s.

ID: 1979

Severity: WARNING
Message: Connected to a replication server with wrong group id. We have group id %s and replication server id %s %s has group id %s. This is for domain %s in directory server %s.

ID: 1980

Severity: ERROR
Message: Replication broker with dn %s and server id %s failed to signal status change because of: %s.

ID: 1981

Severity: ERROR
Message: Caught IOException while changing status for domain %s and serverId: %s from status analyzer: %s.

ID: 1982

Severity: NOTICE
Message: Ignoring reset generation ID request from '%s' to '%s' for replica '%s' because the replica is being re-initialized.

ID: 1983

Severity: ERROR
Message: The generation ID could not be reset for domain %s.

ID: 1984

Severity: NOTICE
Message: Cannot change the configuration while a total update is in progress.

ID: 1985

Severity: ERROR
Message: The Replication was not started on base-dn %s : %s.

ID: 1986

Severity: ERROR
Message: Replication protocol error. Bad message type. %s received, %s required.

ID: 1987

Severity: NOTICE
Message: Wrong fractional replication configuration: could not find object class definition for %s in schema.

ID: 1988

Severity: NOTICE
Message: Wrong fractional replication configuration : could not find attribute type definition for %s in schema.

ID: 1989

Severity: NOTICE
Message: Wrong fractional replication configuration : attribute %s is not optional in class %s.

ID: 1990

Severity: NOTICE
Message: Wrong fractional replication configuration : wrong format : %s (need at least [<className>|*],attributeName).

ID: 1991

Severity: NOTICE
Message: Wrong fractional replication configuration : cannot use both exclusive and inclusive modes.

ID: 1992

Severity: NOTICE
Message: Wrong fractional replication configuration : prohibited attribute %s usage.

ID: 1993

Severity: NOTICE
Message: Fractional replication : exception for domain : %s : %s.

ID: 1994

Severity: NOTICE
Message: Warning : domain %s fractional replication configuration is inconsistent with backend data set : need resynchronization or fractional configuration to be changed.

ID: 1995

Severity: ERROR
Message: The fractional replication ldif import plugin is configured with invalid plugin type %s. Only the ldifImport plugin type is allowed.

ID: 1996

Severity: NOTICE
Message: The online full update for importing suffix %s data from remote directory server %s has been stopped due to fractional configuration inconsistency between destination and source server : imported data set has not the same fractional configuration.

ID: 1997

Severity: NOTICE
Message: The online full update for importing suffix %s data from remote directory server %s has been stopped due to fractional configuration inconsistency between destination and source server : imported data set has some fractional configuration but not destination server.

ID: 1998

Severity: NOTICE
Message: The following operation has been forbidden in suffix %s due to inconsistency with the fractional replication configuration : %s.

ID: 1999

Severity: NOTICE
Message: The export of domain %s from server %s to all other servers of the topology is forbidden as the source server has some fractional configuration : only fractional servers in a replicated topology does not make sense.

ID: 2000

Severity: ERROR
Message: An error occurred when accessing the change number database : %s.

IDs: 2001-2500

ID: 2001

Severity: ERROR
Message: The initialization failed because the domain %s is not connected to a replication server.

ID: 2002

Severity: ERROR
Message: Could not retrieve the configuration for a replication domain matching the entry %s.

ID: 2003

Severity: NOTICE
Message: The LDIF import for importing suffix %s data has been stopped due to fractional configuration inconsistency : imported data set has not the same fractional configuration as local server.

ID: 2004

Severity: NOTICE
Message: The LDIF import for importing suffix %s data has been stopped due to fractional configuration inconsistency : imported data set has some fractional configuration but not local server.

ID: 2005

Severity: WARNING
Message: A transient problem occurred while Directory Server %s was connecting to this Replication Server %s. The peer server may try to establish a connection again. The problem was: %s.

ID: 2006

Severity: WARNING
Message: A transient problem occurred while Replication Server %s was connecting to this Replication Server %s. The Replication Server should try to reconnect later. The problem was: %s.

ID: 2007

Severity: NOTICE
Message: Error when loading a virtual attribute for external change log: Attribute: %s , Error: %s.

ID: 2008

Severity: ERROR
Message: Full resync required. Reason: The provided cookie contains unknown replicated domain %s. Current starting cookie <%s>.

ID: 2009

Severity: ERROR
Message: Full resync required. Reason: The provided cookie is older than the start of historical in the server for the replicated domain : %s.

ID: 2010

Severity: ERROR
Message: Invalid syntax for the provided cookie '%s'.

ID: 2011

Severity: ERROR
Message: Domain %s (server id: %s) : remote exporter server disconnection (server id: %s ) detected during initialization.

ID: 2012

Severity: ERROR
Message: During initialization from a remote server, the following error occurred : %s.

ID: 2013

Severity: ERROR
Message: Connection failure with Replication Server %s during import.

ID: 2014

Severity: ERROR
Message: Bad msg id sequence during import. Expected:%s Actual:%s.

ID: 2015

Severity: ERROR
Message: The following servers did not acknowledge initialization in the expected time for domain %s. They are potentially down or too slow. Servers list: %s.

ID: 2016

Severity: ERROR
Message: The following servers did not end initialization being connected with the right generation (%s). They are potentially stopped or too slow. Servers list: %s.

ID: 2017

Severity: ERROR
Message: When initializing remote server(s), connection to Replication Server with serverId=%s is lost.

ID: 2018

Severity: ERROR
Message: When initializing remote server(s), the initialized server with serverId=%s is potentially stopped or too slow.

ID: 2019

Severity: ERROR
Message: When sending a new initialization request for an initialization from a remote server, the following error occurred %s. The initial error was : %s.

ID: 2020

Severity: NOTICE
Message: Resending a new initialization request for an initialization from a remote server due to the root error : %s.

ID: 2021

Severity: ERROR
Message: Error while trying to solve conflict with DN : %s ERROR : %s.

ID: 2022

Severity: NOTICE
Message: Replication server RS(%s) started listening for new connections on address %s port %d.

ID: 2023

Severity: INFO
Message: Replication server RS(%s) has connected to replication server RS(%s) for domain "%s" at %s.

ID: 2024

Severity: INFO
Message: Replication server RS(%s) has accepted a connection from replication server RS(%s) for domain "%s" at %s.

ID: 2025

Severity: INFO
Message: Replication server RS(%s) has accepted a connection from directory server DS(%s) for domain "%s" at %s.

ID: 2026

Severity: NOTICE
Message: Directory server DS(%s) has connected to replication server RS(%s) for domain "%s" at %s with generation ID %s.

ID: 2027

Severity: WARNING
Message: Directory server DS(%s) has connected to replication server RS(%s) for domain "%s" at %s, but the generation IDs do not match, indicating that a full re-initialization is required. The local (DS) generation ID is %s and the remote (RS) generation ID is %s.

ID: 2028

Severity: WARNING
Message: Directory server DS(%s) was unable to connect to any of the following replication servers for domain "%s": %s.

ID: 2029

Severity: WARNING
Message: Directory server DS(%s) was unable to connect to any replication servers for domain "%s".

ID: 2030

Severity: WARNING
Message: Replication server RS(%s) at %s has closed the connection to this directory server DS(%s). This directory server will now try to connect to another replication server in order to receive changes for the domain "%s".

ID: 2031

Severity: WARNING
Message: Directory server DS(%s) encountered an error while receiving changes for domain "%s" from replication server RS(%s) at %s. The connection will be closed, and this directory server will now try to connect to another replication server. The error was: %s.

ID: 2032

Severity: NOTICE
Message: Directory Server DS(%s) is switching from replication server RS(%s) at %s to RS(%s) for domain "%s" because it is more suitable. The previous replication server evaluation was: "%s", and the new replication server evaluation was: "%s".

ID: 2033

Severity: NOTICE
Message: Starting total update: importing domain "%s" from remote directory server DS(%s) to this directory server DS(%s).

ID: 2034

Severity: NOTICE
Message: Finished total update: imported domain "%s" from remote directory server DS(%s) to this directory server DS(%s). %s.

ID: 2035

Severity: NOTICE
Message: Starting total update: exporting %d entries in domain "%s" from this directory server DS(%s) to remote directory server DS(%s).

ID: 2036

Severity: NOTICE
Message: Starting total update: exporting %d entries in domain "%s" from this directory server DS(%s) to all remote directory servers.

ID: 2037

Severity: NOTICE
Message: Finished total update: exported domain "%s" from this directory server DS(%s) to remote directory server DS(%s). %s.

ID: 2038

Severity: NOTICE
Message: Finished total update: exported domain "%s" from this directory server DS(%s) to all remote directory servers. %s.

ID: 2039

Severity: NOTICE
Message: Directory server DS(%s) for domain "%s" has changed its status to %s.

ID: 2040

Severity: WARNING
Message: Directory server DS(%s) is closing its connection to replication server RS(%s) at %s for domain "%s" because it could not detect a heart beat.

ID: 2041

Severity: WARNING
Message: Replication server RS(%s) at %s presented generation ID %s for domain "%s", but the generation ID of this replication server RS(%s) is %s. This usually indicates that one or more directory servers in the replication topology have not been initialized with the same data, and re-initialization is required.

ID: 2042

Severity: NOTICE
Message: The generation ID for domain "%s" has been reset to %s.

ID: 2043

Severity: WARNING
Message: Timed out while trying to acquire the domain lock for domain "%s". The connection attempt from replication server RS(%s) at %s to this replication server RS(%s) will be aborted. This is probably benign and a result of a simultaneous cross connection attempt.

ID: 2044

Severity: WARNING
Message: Directory server DS(%s) at %s presented generation ID %s for domain "%s", but the generation ID of this replication server RS(%s) is %s. This usually indicates that one or more directory servers in the replication topology have not been initialized with the same data, and re-initialization is required.

ID: 2045

Severity: NOTICE
Message: Replication server RS(%s) ignoring update %s for domain "%s" from replication server RS(%s) at %s because its generation ID %s is different to the local generation ID %s.

ID: 2046

Severity: WARNING
Message: Replication server RS(%s) not sending update %s for domain "%s" to replication server RS(%s) at %s because its generation ID %s is different to the local generation ID %s.

ID: 2047

Severity: WARNING
Message: Replication server RS(%s) ignoring update %s for domain "%s" from directory server DS(%s) at %s because its generation ID %s is different to the local generation ID %s.

ID: 2048

Severity: WARNING
Message: Replication server RS(%s) not sending update %s for domain "%s" to directory server DS(%s) at %s because its generation ID %s is different to the local generation ID %s.

ID: 2049

Severity: WARNING
Message: Replication server RS(%s) ignoring update %s for domain "%s" from directory server DS(%s) at %s because it is currently performing a full update.

ID: 2050

Severity: WARNING
Message: Replication server RS(%s) not sending update %s for domain "%s" to directory server DS(%s) at %s because it is currently performing a full update.

ID: 2051

Severity: ERROR
Message: The connection from this replication server RS(%s) to replication server RS(%s) at %s for domain "%s" has failed.

ID: 2052

Severity: ERROR
Message: The connection from this replication server RS(%s) to directory server DS(%s) at %s for domain "%s" has failed.

ID: 2053

Severity: WARNING
Message: Directory server DS(%s) was unable to connect to replication server %s for domain "%s". Please check that there is a replication server listening at this address.

ID: 2054

Severity: WARNING
Message: Directory server DS(%s) timed out while connecting to replication server %s for domain "%s".

ID: 2055

Severity: ERROR
Message: Directory server DS(%s) encountered an unexpected error while connecting to replication server %s for domain "%s": %s.

ID: 2056

Severity: WARNING
Message: Directory server DS(%s) encountered a transient problem while connecting to replication server %s for domain "%s". Directory server will try to connect to a replication server again. The problem was: %s.

ID: 2057

Severity: INFO
Message: Replication server accepted a connection from %s to local address %s but the SSL handshake failed. This is probably benign, but may indicate a transient network outage or a misconfigured client application connecting to this replication server. The error was: %s.

ID: 2058

Severity: NOTICE
Message: Directory Server DS(%s) is disconnecting from replication server RS(%s) at %s for domain "%s" in order to find another replication server in the topology and distribute load more equally.

ID: 2059

Severity: WARNING
Message: The attribute value '%s' is not a valid synchronization history value.

ID: 2060

Severity: WARNING
Message: Cannot open database %s because shutdown was requested from replication server RS(%s).

ID: 2061

Severity: NOTICE
Message: RS(%s) has no generation Id, but at least one other RS has the same generation Id %s as DS(%s).

ID: 2062

Severity: NOTICE
Message: RS(%s) generation Id %s does not match DS(%s) generation Id %s, but at least another RS does.

ID: 2063

Severity: NOTICE
Message: RS(%s) groupId '%s' does not match DS(%s) groupId '%s', but at least one other RS does.

ID: 2064

Severity: NOTICE
Message: RS(%s) newest change %s is behind DS(%s) newest change %s, but at least another RS is at the same point or ahead of the DS.

ID: 2065

Severity: NOTICE
Message: RS(%s) newest change %s is behind another RS which is ahead of DS(%s) newest change %s.

ID: 2066

Severity: NOTICE
Message: RS(%s) is not on the same virtual machine as DS(%s) but another RS is.

ID: 2067

Severity: NOTICE
Message: RS(%s) is on a different host than DS(%s), but at least another RS is on the same host.

ID: 2068

Severity: NOTICE
Message: DS(%s) disconnected from overloaded RS(%s).

ID: 2069

Severity: NOTICE
Message: DS(%s) not disconnected from overloaded RS(%s), other DSs will disconnect.

ID: 2070

Severity: NOTICE
Message: DS(%s) not disconnected from current RS(%s), since there is no need to rebalance all directory servers to other replication servers in the topology.

ID: 2071

Severity: NOTICE
Message: DS(%s) not disconnected from current RS(%s), because RS is underloaded or its load goal is reached.

ID: 2072

Severity: NOTICE
Message: DS(%s) will connect to RS(%s) because it has the biggest weight among all the replication servers.

ID: 2073

Severity: NOTICE
Message: DS(%s) stayed connected to RS(%s) to avoid the yoyo effect.

ID: 2074

Severity: NOTICE
Message: RS(%s) has been evaluated to be the best replication server for DS(%s) to connect to because it was the only one standing after all tests.

ID: 2075

Severity: NOTICE
Message: RS(%s) could not be contacted by DS(%s).

ID: 2076

Severity: ERROR
Message: Could not create replica database because the changelog database is shutting down.

ID: 2077

Severity: ERROR
Message: Could not add change %s to replicaDB %s %s because flushing thread is shutting down.

ID: 2078

Severity: ERROR
Message: Error when retrieving changelog state from root path '%s' : IO error on domain directory '%s' when retrieving list of server ids.

ID: 2079

Severity: ERROR
Message: Could not get or create replica DB for base DN '%s', serverId '%s', generationId '%s': %s.

ID: 2080

Severity: ERROR
Message: Could not get or create change number index DB in root path '%s', using path '%s': %s.

ID: 2081

Severity: ERROR
Message: Could not delete generation id file '%s' for DN '%s': %s.

ID: 2082

Severity: ERROR
Message: Could not create directory '%s' for server id %s: %s.

ID: 2083

Severity: ERROR
Message: Could not create generation id file '%s': %s.

ID: 2084

Severity: ERROR
Message: Could not read server id filename because it uses a wrong format, expecting '[id].server' where [id] is numeric but got '%s'.

ID: 2085

Severity: ERROR
Message: Could not read generation id because it uses a wrong format, expecting a number but got '%s'.

ID: 2086

Severity: ERROR
Message: Could not open log file '%s' for write: %s.

ID: 2087

Severity: ERROR
Message: Could not open a reader on log file '%s': %s.

ID: 2088

Severity: ERROR
Message: Could not decode a record from data read in log file '%s'.

ID: 2089

Severity: ERROR
Message: Could not delete log files: %s.

ID: 2090

Severity: ERROR
Message: Could not create log file '%s': %s.

ID: 2091

Severity: WARNING
Message: The changelog '%s' has been opened in read-only mode, it is not enabled for write.

ID: 2092

Severity: ERROR
Message: Could not add record '%s' in log file '%s': %s.

ID: 2093

Severity: ERROR
Message: Could not synchronize written records to file system for log file '%s': %s.

ID: 2094

Severity: ERROR
Message: Could not seek to position %d for reader on log file '%s'.

ID: 2095

Severity: ERROR
Message: Could not create root directory '%s' for log file: %s.

ID: 2096

Severity: ERROR
Message: Could not decode DN from domain state file '%s', from line '%s'.

ID: 2097

Severity: ERROR
Message: Could not read domain state file '%s'. The replication server cannot continue, it should be restored from a backup. Cause was : %s.

ID: 2098

Severity: ERROR
Message: There is a mismatch between domain state file and actual domain directories found in file system. Expected domain ids : %s. Actual domain ids found in file system: %s.

ID: 2099

Severity: ERROR
Message: Could not create a new domain id %s for domain DN %s and save it in the domain state file. Replication will continue, but if the domain state file cannot be written when stopping the server, it should be restored from backup. Cause was : %s.

ID: 2100

Severity: ERROR
Message: Could not decode the key from string [%s].

ID: 2101

Severity: ERROR
Message: Could not initialize the log '%s' : %s.

ID: 2102

Severity: ERROR
Message: Could not retrieve key bounds from log file '%s': %s.

ID: 2103

Severity: ERROR
Message: Could not retrieve read-only log files from log '%s': %s.

ID: 2104

Severity: ERROR
Message: While purging log, could not delete log file(s): '%s'.

ID: 2105

Severity: ERROR
Message: The following log '%s' must be released but it is not referenced.

ID: 2106

Severity: ERROR
Message: Could not read replica offline state file '%s' for domain %s, it should contain exactly one line corresponding to the offline CSN.

ID: 2107

Severity: ERROR
Message: Could not read content of replica offline state file '%s' for domain %s.

ID: 2108

Severity: ERROR
Message: Could not retrieve file length of log file '%s'.

ID: 2109

Severity: ERROR
Message: An error occurred while recovering the replication change log file '%s'. The recovery has been aborted and this replication server will be removed from the replication topology. The change log file system may be read-only, full, or corrupt and must be fixed before this replication server can be used. The underlying error was: %s.

ID: 2110

Severity: INFO
Message: Log file '%s' was successfully recovered by removing unreadable records. The file changed size from %d to %d bytes.

ID: 2111

Severity: NOTICE
Message: You do not have sufficient privileges to perform a search request on cn=changelog.

ID: 2112

Severity: ERROR
Message: An error occurred when searching base DN '%s' with filter '%s' in changelog backend : %s.

ID: 2113

Severity: ERROR
Message: An error occurred when retrieving attribute value for attribute '%s' for entry DN '%s' in changelog backend : %s.

ID: 2114

Severity: ERROR
Message: Could not create file '%s' to store last log rotation time %d.

ID: 2115

Severity: ERROR
Message: Could not delete file '%s' that stored the previous last log rotation time.

ID: 2116

Severity: ERROR
Message: Cursor on log '%s' has been aborted after a purge.

ID: 2117

Severity: ERROR
Message: Could not position and read newest record from log file '%s'. Current thread is '%s'. Error was: %s.

ID: 2118

Severity: ERROR
Message: The change number index could not be reset to start with %d in base DN '%s' because starting CSN '%s' does not exist in the change log.

ID: 2119

Severity: ERROR
Message: The change number could not be reset to %d because the associated change with CSN '%s' has already been purged from the change log. Try resetting to a more recent change.

ID: 2120

Severity: ERROR
Message: Change number indexing is disabled for replication domain '%s'.

ID: 2121

Severity: ERROR
Message: Cannot decode change-log record with version %x.

ID: 2122

Severity: ERROR
Message: Cannot start total update in domain "%s" from this directory server DS(%s): no remote directory servers found.

ID: 2123

Severity: ERROR
Message: Cannot start total update in domain "%s" from this directory server DS(%s): cannot find remote directory server DS(%s).

ID: 2124

Severity: ERROR
Message: New replication connection from %s started with unexpected message %s and is being closed.

ID: 2125

Severity: ERROR
Message: The directory server %s can no longer keep up with changes coming from replication server %s for base DN %s. Some missing changes have been purged by this replication server and the connection will be terminated. The directory server may fail-over to another replication server that has not purged the changes that it needs. If there is no replication server containing the missing changes then it will fail to connect to any replication server and will need to be reinitialized. (Underlying error is: %s).

ID: 2126

Severity: ERROR
Message: The replication server %s can no longer keep up with changes coming from replication server %s for base DN %s. Some missing changes have been purged by this replication server and the connection will be terminated. The directory servers connected to this replication server may fail-over to another replication server that has not purged the changes that it needs. If there is no replication server containing the missing changes then the directory servers will fail to connect to any replication server and will need to be reinitialized. (Underlying error is: %s).

ID: 2127

Severity: WARNING
Message: Error while setting replication listener socket timeout to 1 second for domain '%s', server state may be reported as being a bit late with respect to other servers. Cause was: %s.

ID: 2128

Severity: ERROR
Message: Invalid operator '%s' specified in historicalCsnRangeMatch extensible matching rule assertion.

ID: 2129

Severity: ERROR
Message: Specified assertion '%s' for historicalCsnRangeMatch extensible matching rule does not conform to expected syntax. The assertion must specify a CSN range.

ID: 2130

Severity: ERROR
Message: Specified CSNs '%s' and '%s' have two different server ids. The historicalCsnRangeMatch extensible matching rule requires CSNs to have the same server id.

ID: 2131

Severity: ERROR
Message: Specified operators '%s' and '%s' do not specify a range for historicalCsnRangeMatch extensible matching rule.

ID: 2132

Severity: ERROR
Message: Could not restart the Replication Server, bind to listen port %d failed : %s.

ID: 2133

Severity: ERROR
Message: The replication server has detected that the file system containing the changelog is full. In order to prevent further problems, the replication server will disconnect from the replication topology and wait for sufficient disk space to be recovered, at which point it will reconnect.

ID: 2134

Severity: WARNING
Message: Disk space for the replication changelog is getting low. The replication server will continue to operate, but will stop in the event of a full disk.

ID: 2135

Severity: WARNING
Message: The replication server has detected that the file system containing the changelog has sufficient disk space to resume operation. It is now reconnecting to the rest of the replication topology.

ID: 2136

Severity: NOTICE
Message: An I/O error occurred while reading replication messages from %s. The connection will close and replication server (%s) will not process any more updates from it. Reported error is: %s.

ID: 2137

Severity: NOTICE
Message: %s is disconnecting from this replication server %s.

ID: 2138

Severity: ERROR
Message: The replication server connector thread could not be stopped : %s.

ID: 2139

Severity: ERROR
Message: Unable to position reader to key '%s' using strategy '%s' on log '%s'. Changelog may be corrupted. Directory servers connected to this replication server may need to be reinitialized.

ID: 2140

Severity: ERROR
Message: Assured replication is not supported anymore, it should be disabled on the topology.

ID: 2141

Severity: ERROR
Message: Replication Server '%s' expected to negotiate with another Replication Server but got information for Directory Server '%s' instead. The connection will be closed.

ID: 2142

Severity: WARNING
Message: Replication delay for '%s' is above %dms, current delay: %dms.

ID: 2143

Severity: WARNING
Message: The replication server has detected that the file system containing the changelog has sufficient disk space to resume operation.

ID: 2144

Severity: ERROR
Message: Detected one or more corrupted records in log file '%s', this replication server will be removed from the replication topology. Recover the server from a valid filesystem backup if available or re-create it.

ID: 2145

Severity: ERROR
Message: An error occurred while verifying integrity of log file '%s' : %s.

ID: 2146

Severity: ERROR
Message: Cannot enable replication to server '%s' as this server’s ID '%s' is not a number between 1 and 32767.

ID: 2147

Severity: ERROR
Message: An error occurred in session '%s' when trying to send a message to the socket: %s.

ID: 2148

Severity: ERROR
Message: Could not convert value '%s' to long.

ID: 2149

Severity: ERROR
Message: Could not find replica update message matching the index record. No more replica update messages with a csn newer than %s exist.

ID: 2150

Severity: ERROR
Message: An exception was encountered while trying to encode a replication %s message for entry "%s" into an External Change Log entry: %s.

ID: 2151

Severity: ERROR
Message: Unexpected message type when trying to create changelog entry for dn %s: '%s'.

ID: 2152

Severity: ERROR
Message: %s in Replication Server=%s, an initialization message of type %s cannot be sent to its destination server. Details: routing table is empty.

ID: 2153

Severity: ERROR
Message: %s message of type %s cannot be routed. Details: %s.

ID: 2154

Severity: ERROR
Message: Error when trying to publish a message in '%s'. The connection is going to be closed and reopened.

ID: 2155

Severity: ERROR
Message: Error when trying to publish a message in '%s'. The connection is going to be closed and reopened. Error: %s.

ID: 2156

Severity: ERROR
Message: Error when initializing publisher of messages in '%s'.

ID: 2157

Severity: ERROR
Message: Error when initializing publisher of messages in '%s'.

ID: 2158

Severity: ERROR
Message: Directory server %s was attempting to connect to replication server %s but an error occurred in handshake phase. Error: %s.

ID: 2159

Severity: ERROR
Message: Replication server %s was attempting to connect to replication server %s but an error occurred in handshake phase. Error: %s.

ID: 2160

Severity: ERROR
Message: Error when enabling external changelog: %s.

ID: 2161

Severity: WARNING
Message: Directory server %s stopped the handshake process with replication server %s because it received the unexpected message '%s'.

ID: 2162

Severity: INFO
Message: Cursor on replica '%s' invalidated.

ID: 2163

Severity: ERROR
Message: The domain state file cannot be written. The server will shutdown but it should be restored from backup. Cause was : %s.

ID: 2164

Severity: ERROR
Message: Some data in the domain state file '%s' in not of the form <domainId>[csn:csn]:<domainDN>, the replication server cannot start. Restore the server from backup.

ID: 2165

Severity: INFO
Message: Task '%s' to initialize domain '%s' failed to contact the source server. The task will be retried because the current server may be in the process of re-connecting to the best replication server for itself.

ID: 2166

Severity: INFO
Message: The server '%s' may retry the initialization process because the server '%s' in domain '%s' is temporarily unreachable.

ID: 2167

Severity: ERROR
Message: Error when purging historical information for entry %s: %s.

ID: 2168

Severity: ERROR
Message: Replication server failed to start because setting socket timeout on port %d caused error %s.

ID: 2169

Severity: WARNING
Message: A transient problem occurred while DS(%s) was connecting to RS(%s), Directory Server will try to connect again. Problem was: %s.

ID: 2170

Severity: ERROR
Message: %s for domain %s cannot route message of type %s to all the replicas in the topology because none are reachable.

ID: 2171

Severity: ERROR
Message: %s for domain '%s' cannot route message of type %s to replica %s because it is unreachable. Reachable replicas: %s.

ID: 2172

Severity: ERROR
Message: Server %s should be initialized but is not connected to the topology.

ID: 2174

Severity: ERROR
Message: Changelog file %s should be version %d, but found version %d. Likely causes for this error: the server binaries were accidentally downgraded, data was restored from a file system backup taken on a more recent version of the server, or the changelog file was corrupted. If the server was downgraded, upgrade it. If the data was restored from a file system backup, restore it again from a recent, valid file system backup taken on the same version of the server. Otherwise, as last resort, remove the changelog by running the 'dsrepl clear-changelog' command and restart the server.

ID: 2175

Severity: NOTICE
Message: An unresolved conflict was detected in CSN %s replaying a DELETE of "%s" as child entries exist (renaming child "%s" to "%s"). Consider restoring the parent entry, or deleting the renamed child entries.

ID: 2176

Severity: NOTICE
Message: An unresolved conflict was detected in CSN %s replaying an ADD of "%s" as the parent entry is missing (adding as "%s"). Consider restoring the parent entry, or deleting the new entry.

ID: 2177

Severity: NOTICE
Message: An unresolved conflict was detected in CSN %s replaying an ADD of "%s" which already exists (adding as "%s"). Consider reviewing both entries and either merge the contents manually or delete one.

ID: 2178

Severity: NOTICE
Message: An unresolved conflict was detected in CSN %s replaying a MODIFYDN of "%s" as the new parent entry "%s" does not exist. Consider restoring the parent entry, or deleting this entry.

ID: 2179

Severity: NOTICE
Message: An unresolved conflict was detected in CSN %s replaying a MODIFYDN of "%s" to "%s" which already exists (renaming as "%s"). Consider merging the two entries manually, or deleting one of them.

ID: 2181

Severity: NOTICE
Message: RS(%s) groupId '%s' has lower priority than groupId '%s' which matched at least one other RS.

ID: 2182

Severity: ERROR
Message: Peer '%s' has sent an update, but it is not allowed to do so by the configuration of this replication server. This update will be discarded. Check the configuration of both this replication server and its peer to determine if they have to be adjusted.

ID: 2183

Severity: ERROR
Message: Replication peer certificate verification failed with error: %s.

ID: 2184

Severity: ERROR
Message: Digest algorithm '%s' of fingerprint '%s' is not supported by the JVM.

ID: 2185

Severity: ERROR
Message: The following replication server listener threads were unexpectedly stopped: %s. A server restart may be needed.

ID: 2186

Severity: ERROR
Message: Cursor on log '%s' has been aborted after a clear.

ID: 2187

Severity: ERROR
Message: Initialization of domain '%s' interrupted: no data received from the remote exporter '%s' for %s.

ID: 2188

Severity: NOTICE
Message: Recovery interrupted because shutdown of replication domain has been requested.

ID: 2189

Severity: WARNING
Message: The replication server domain connection for '%s' will be forcibly closed because the peer replication server '%s' is unresponsive.

ID: 2190

Severity: WARNING
Message: The replication domain connection for '%s' will be forcibly closed because the peer replication server '%s' is unresponsive.

ID: 2191

Severity: WARNING
Message: ChangeTime Heartbeat publisher '%s' for domain '%s' will be forcibly stopped because the peer server is unresponsive.

ID: 2192

Severity: ERROR
Message: Publish of a replication message to server '%s' was interrupted.

ID: 2193

Severity: ERROR
Message: Changelog on replication server '%s' no longer contains changes for domain '%s' which are required by replica '%s'. The replica will no longer receive replicated changes and must be re-initialized.

ID: 2195

Severity: WARNING
Message: Replication server RS(%s) is not sending update %s for domain '%s' to directory server DS(%s) at %s because the replica is too late and must be re-initialized.

ID: 2196

Severity: WARNING
Message: Replication server RS(%s) is ignoring update %s for domain "%s" from directory server DS(%s) at %s because the replica is too late and must be re-initialized.

ID: 2197

Severity: WARNING
Message: Replication server RS(%s) is closing its connection to %s at %s for domain '%s' because it could not detect a heartbeat: time since last message (%s) is greater than the timeout interval %s ms (heartbeat interval is %s ms).

ID: 2198

Severity: WARNING
Message: Change number indexing cannot advance because some replicas do not seem to be part of the topology anymore. The changelog will not be able to purge old files until replicas reconnect or their reference is deleted from user data. The following replicas are referenced by replication, but they are not connected to the topology or they have not been properly stopped: %s.

ID: 2199

Severity: WARNING
Message: Change number indexing cannot advance because replica '%s' has not sent any messages since '%s'. The changelog is temporarily unable to purge old files. Verify whether the replica is still running or is connected to a replication server.

ID: 2200

Severity: ERROR
Message: Replica '%s' seems to have disconnected from the topology while it was being re-initialized, initialization will stop.

ID: 2201

Severity: ERROR
Message: Initialization of replication domain '%s' interrupted because the domain is shutting down. The domain still needs to be re-initialized.

ID: 2202

Severity: INFO
Message: Change number indexing will resume since replica '%s' is now sending messages again.

ID: 2203

Severity: WARNING
Message: Directory server DS(%s) was unable to connect to replication server at %s for domain '%s': unknown host.

ID: 2204

Severity: INFO
Message: Directory server DS(%s) did not find a generation ID for domain '%s'. A new generation ID will be computed by exporting the first %d entries in the domain.

ID: 2205

Severity: WARNING
Message: Replica '%s' for domain '%s' tried to connect but the replication server is still processing messages from the previous replication session and considers the replica already connected. The connection will be closed, the replica will connect again.

ID: 2206

Severity: INFO
Message: %s: received message <%s>.

ID: 2207

Severity: NOTICE
Message: This replica %s has received a notification from its replication server %s to stop processing updates for domain %s as part of a disaster recovery procedure. This replica must be reinitialized as part of the recovery procedure.

ID: 2209

Severity: ERROR
Message: The search cannot be processed because the external changelog is not configured to generate change numbers. Change the replication server configuration if change numbers are needed.

ID: 2210

Severity: INFO
Message: The purge delay has been set to: %s.

ID: 2211

Severity: INFO
Message: Purging is disabled (delay set to 0).

ID: 2212

Severity: ERROR
Message: An unexpected error occurred when loading the fractional replication configuration of domain "%s": %s.

ID: 2213

Severity: WARNING
Message: Replication server RS(%s) ignoring update %s for domain "%s" from directory server DS(%s) at %s because the peer DS reported to be in BAD_DATA status. The generation ID matches, (DS is %s, RS is %s), there may be a problem with fractional replication configuration. Check the DS error logs for more details.

ID: 2214

Severity: WARNING
Message: Replication server RS(%s) not sending update %s for domain "%s" to directory server DS(%s) at %s because the peer DS reported to be in BAD_DATA status. The generation ID matches, (DS is %s, RS is %s), there may be a problem with fractional replication configuration. Check the DS error logs for more details.

ID: 2215

Severity: NOTICE
Message: JAVA Version: %s.

ID: 2216

Severity: NOTICE
Message: JAVA Vendor: %s.

ID: 2217

Severity: NOTICE
Message: JVM Version: %s.

ID: 2218

Severity: NOTICE
Message: JVM Vendor: %s.

ID: 2219

Severity: NOTICE
Message: JAVA Home: %s.

ID: 2220

Severity: NOTICE
Message: Class Path: %s.

ID: 2221

Severity: NOTICE
Message: Current Directory: %s.

ID: 2222

Severity: NOTICE
Message: Operating System: %s.

ID: 2223

Severity: NOTICE
Message: JVM Architecture: %s.

ID: 2224

Severity: NOTICE
Message: System Name: %s.

ID: 2225

Severity: NOTICE
Message: Available Processors: %d.

ID: 2226

Severity: NOTICE
Message: Max Available Memory: %d.

ID: 2227

Severity: NOTICE
Message: Currently Used Memory: %d.

ID: 2228

Severity: NOTICE
Message: Currently Free Memory: %d.

ID: 2229

Severity: NOTICE
Message: JVM Information: %s by %s, %s architecture, %d bytes heap size.

ID: 2230

Severity: NOTICE
Message: JVM Host: %s, running %s, %d bytes physical memory size, number of processors available %d.

ID: 2231

Severity: NOTICE
Message: JVM Arguments: %s.

ID: 2232

Severity: NOTICE
Message: JVM Host: %s, running %s, unknown physical memory size, number of processors available %d.

ID: 2233

Severity: NOTICE
Message: Installation Directory: %s.

ID: 2234

Severity: NOTICE
Message: Installation Directory: unknown.

ID: 2235

Severity: NOTICE
Message: Instance Directory: %s.

ID: 2236

Severity: NOTICE
Message: Instance Directory: unknown.

ID: 2237

Severity: ERROR
Message: The provided value "%s" could not be parsed as a valid distinguished name because the last non-space character was a comma or semicolon.

ID: 2238

Severity: ERROR
Message: The provided value "%s" could not be parsed as a valid distinguished name because character '%c' at position %d is not allowed in an attribute name.

ID: 2239

Severity: ERROR
Message: The provided value "%s" could not be parsed as a valid distinguished name because the hyphen character is not allowed as the first character of an attribute name.

ID: 2240

Severity: ERROR
Message: The provided value "%s" could not be parsed as a valid distinguished name because it contained an RDN containing an empty attribute name.

ID: 2241

Severity: ERROR
Message: The provided value "%s" could not be parsed as a valid distinguished name because the parsed attribute name %s included a period but that name did not appear to be a valid OID.

ID: 2242

Severity: ERROR
Message: The provided value "%s" could not be parsed as a valid distinguished name because the last non-space character was part of the attribute name '%s'.

ID: 2243

Severity: ERROR
Message: The provided value "%s" could not be parsed as a valid distinguished name because the next non-space character after attribute name "%s" should have been an equal sign but instead was '%c'.

ID: 2244

Severity: ERROR
Message: The provided value "%s" could not be parsed as a valid distinguished name because character '%c' at position %d is not valid.

ID: 2245

Severity: ERROR
Message: The provided value "%s" could not be parsed as a valid distinguished name because an attribute value started with an octothorpe (#) but was not followed by a positive multiple of two hexadecimal digits.

ID: 2246

Severity: ERROR
Message: The provided value "%s" could not be parsed as a valid distinguished name because an attribute value started with an octothorpe (#) but contained a character %c that was not a valid hexadecimal digit.

ID: 2247

Severity: ERROR
Message: The provided value "%s" could not be parsed as a valid distinguished name because an unexpected failure occurred while attempting to parse an attribute value from one of the RDN components: "%s".

ID: 2248

Severity: ERROR
Message: The provided value "%s" could not be parsed as a valid distinguished name because one of the RDN components included a quoted value that did not have a corresponding closing quotation mark.

ID: 2249

Severity: ERROR
Message: The provided value "%s" could not be parsed as a valid distinguished name because one of the RDN components included a value with an escaped hexadecimal digit that was not followed by a second hexadecimal digit.

ID: 2251

Severity: ERROR
Message: The provided value "%s" could not be parsed as a valid subtree specification.

ID: 2252

Severity: NOTICE
Message: A schema element could not be imported: %s, %s.

ID: 2253

Severity: ERROR
Message: There should be no warnings on the schema, but instead got %d warnings: %s.

ID: 2254

Severity: ERROR
Message: Unable to parse the OID from the provided definition of objectclass: '%s'.

ID: 2255

Severity: ERROR
Message: Unable to parse the OID from the provided definition of attribute type: '%s'.

ID: 2256

Severity: ERROR
Message: Unable to parse the OID from the provided definition of ldap syntax: '%s'.

ID: 2257

Severity: ERROR
Message: Unable to parse the OID from the provided definition of matching rule use: '%s'.

ID: 2258

Severity: ERROR
Message: Unable to parse the OID from the provided definition of name form: '%s'.

ID: 2259

Severity: ERROR
Message: Unable to parse the OID from the provided definition of DIT content rule: '%s'.

ID: 2260

Severity: ERROR
Message: Unable to parse the rule ID from the provided definition of DIT structure rule: '%s'.

ID: 2268

Severity: ERROR
Message: There is already a server instance configured in the directory %s. Please make sure there is no configuration (config) or data (db) directory in the server instance root path.

ID: 2269

Severity: INFO
Message: You have chosen to combine an evaluation profile with another profile that is intended for production. Applying an evaluation profile after others can compromise the security of your server. Review the server configuration carefully before deployment.

ID: 2270

Severity: ERROR
Message: The file '%s' is referring to an invalid instance (%s). You must remove this file before setting up a new instance in the directory %s. Please use either the --%s option in non interactive mode or the interactive mode to setup an instance elsewhere.

ID: 2271

Severity: ERROR
Message: A server instance (%s) has already been setup in the directory %s.

ID: 2272

Severity: WARNING
Message: Setup has failed, see the errors in the messages below. The process also failed to automatically remove the files that it created during setup. Please manually remove the 'db' and 'config' directories from the instance directory before trying to run the setup again.

ID: 2273

Severity: WARNING
Message: Setup has failed, see the errors in the messages below. The process also failed to automatically remove the files that it created during setup. Please manually remove the 'db' and 'config' directories from the instance directory and the '%s' file before trying to run the setup again.

ID: 2274

Severity: ERROR
Message: The file based keystore password cannot be empty.

ID: 2275

Severity: ERROR
Message: You must specify the keystore password of the file based keystore. You can use either --%s or --%s options to specify it.

ID: 2276

Severity: INFO
Message: Path of a JCEKS keystore containing the certificate(s) that the server should use when negotiating secure connections using StartTLS or SSL.

ID: 2277

Severity: INFO
Message: Path of a JKS keystore containing the certificate(s) that the server should use when negotiating secure connections using StartTLS or SSL.

ID: 2278

Severity: ERROR
Message: You must specify a valid port number.

ID: 2279

Severity: INFO
Message: Trust remote server certificates.

ID: 2280

Severity: INFO
Message: Use existing PKCS#12 truststore.

ID: 2281

Severity: INFO
Message: Use existing JCEKS truststore.

ID: 2282

Severity: INFO
Message: Use existing JKS truststore.

ID: 2283

Severity: INFO
Message: Truststore file.

ID: 2284

Severity: INFO
Message: Truststore password.

ID: 2285

Severity: INFO
Message: PKCS#12 truststore path:.

ID: 2286

Severity: INFO
Message: JCEKS truststore path:.

ID: 2287

Severity: INFO
Message: JKS truststore path:.

ID: 2288

Severity: INFO
Message: Truststore password (leave empty if the truststore has no password):.

ID: 2289

Severity: INFO
Message: How should the server trust certificates from SSL peers?.

ID: 2290

Severity: INFO
Message: Use the JVM truststore.

ID: 2291

Severity: INFO
Message: Use a PKCS#12 truststore.

ID: 2292

Severity: INFO
Message: Use a JCEKS truststore.

ID: 2293

Severity: INFO
Message: Use a JKS truststore.

ID: 2294

Severity: INFO
Message: Blindly trust all certificates (evaluation only - unsafe for production).

ID: 2295

Severity: INFO
Message: No password provided.

ID: 2296

Severity: INFO
Message: Use existing PKCS12 truststore file for validating peer SSL certificates.

ID: 2297

Severity: INFO
Message: Use existing JCEKS truststore file for validating peer SSL certificates.

ID: 2298

Severity: INFO
Message: Use existing JKS truststore file for validating peer SSL certificates.

ID: 2299

Severity: INFO
Message: Blindly trust peer SSL certificates.

ID: 2300

Severity: ERROR
Message: The provided password file '%s' must be an existing readable file.

ID: 2301

Severity: ERROR
Message: Unable to read password in file '%s'. A password file must contain a single line with the keystore password, details: %s.

ID: 2302

Severity: ERROR
Message: Invalid content for password file '%s'. A password file must contain a single line with the password.

ID: 2303

Severity: ERROR
Message: password is empty.

ID: 2304

Severity: ERROR
Message: An error occurred while storing provided password in the instance file '%s', details: %s.

ID: 2305

Severity: ERROR
Message: Could not access the %s truststore '%s'. Check that the content of the file corresponds to a valid truststore, that you have access rights to it and that a valid password has been provided if needed. Error details: %s.

ID: 2306

Severity: ERROR
Message: clear-text password cannot be empty.

ID: 2307

Severity: ERROR
Message: An error occurred while creating the file based trust manager provider: %s.

ID: 2308

Severity: ERROR
Message: An error occurred while enabling the %s trust manager provider: %s.

ID: 2309

Severity: ERROR
Message: The provided truststore file '%s' must be an existing readable file.

ID: 2310

Severity: ERROR
Message: An error occurred while creating the PKCS#11 key manager provider: %s.

ID: 2311

Severity: ERROR
Message: Could not read the %s keystore '%s' entries. Check that the content of the file corresponds to a valid keystore, that you have access rights to it and that a valid password has been provided if needed. Error details: %s.

ID: 2312

Severity: ERROR
Message: Could not access the PKCS#11 keystore. Check that the JVM security settings have been configured to use a PKCS#11 keystore and that a valid password has been provided if needed. Error details: %s.

ID: 2313

Severity: ERROR
Message: No private key entry found in keystore '%s'. Keystores used for securing client connections must contain at least one private key entry. Beware: you may need to provide the keystore password to access keystore private entries.

ID: 2314

Severity: INFO
Message: Provide the server’s fully qualified host name.

ID: 2315

Severity: INFO
Message: Welcome to the OpenDJ %s interactive setup.%n%nInteractive mode helps you quickly set up an OpenDJ server.%nProvide all required options to set up the server in non-interactive mode,%nor use the command shown at the end of your interactive session.

ID: 2316

Severity: ERROR
Message: License not accepted, %s will exit.

ID: 2317

Severity: ERROR
Message: Invalid input: keystore path cannot be empty.

ID: 2318

Severity: ERROR
Message: Invalid configuration: you must use at least one certificate nickname.

ID: 2319

Severity: INFO
Message: The keystore contains the following certificate nicknames: %s.%nYou will be prompted for the nickname(s) to use.

ID: 2320

Severity: ERROR
Message: The number of entries to import must be a positive integer.

ID: 2321

Severity: ERROR
Message: Value '%s' must be a valid number.

ID: 2322

Severity: ERROR
Message: Value '%s' must be a valid version (two or three digits separated with a dot).

ID: 2323

Severity: ERROR
Message: Please select at least version %s.

ID: 2324

Severity: INFO
Message: Listening on port %d.

ID: 2325

Severity: INFO
Message: Customize Server With Profiles.

ID: 2326

Severity: INFO
Message: Server security.

ID: 2327

Severity: INFO
Message: Keystore file.

ID: 2328

Severity: INFO
Message: Use existing PKCS#11 keystore.

ID: 2329

Severity: INFO
Message: Use existing PKCS#12 keystore.

ID: 2330

Severity: INFO
Message: Use existing JCEKS keystore.

ID: 2331

Severity: INFO
Message: Use existing JKS keystore.

ID: 2332

Severity: INFO
Message: Keystore password.

ID: 2333

Severity: INFO
Message: Certificate nickname(s) to use.

ID: 2334

Severity: INFO
Message: LDAP (cleartext).

ID: 2335

Severity: INFO
Message: LDAPS (secure).

ID: 2336

Severity: INFO
Message: HTTP (cleartext).

ID: 2337

Severity: INFO
Message: HTTPS (secure).

ID: 2338

Severity: INFO
Message: How would you like to secure your deployment?.

ID: 2339

Severity: INFO
Message: You already have a CA certificate for the deployment and an SSL key-pair for this server.

ID: 2340

Severity: INFO
Message: Provide the SSL certificate that will be used for securing server connections:.

ID: 2341

Severity: INFO
Message: Generate a CA certificate and SSL key-pair using the deployment ID (easier to deploy, but not suitable for public facing services).

ID: 2342

Severity: INFO
Message: Provide the deployment ID:.

ID: 2343

Severity: INFO
Message: Server instance path.

ID: 2344

Severity: INFO
Message: Provide the server instance path.

ID: 2345

Severity: INFO
Message: Provide the directory root user DN.

ID: 2346

Severity: INFO
Message: Provide the password for root user (leave empty to use the deployment ID password):.

ID: 2347

Severity: INFO
Message: Confirm the password for root user:.

ID: 2348

Severity: INFO
Message: Enable HTTP?.

ID: 2349

Severity: INFO
Message: HTTP port.

ID: 2350

Severity: INFO
Message: Enable HTTPS?.

ID: 2351

Severity: INFO
Message: HTTPS port.

ID: 2352

Severity: INFO
Message: Start server after setup.

ID: 2353

Severity: INFO
Message: Run as Windows service.

ID: 2354

Severity: INFO
Message: Server’s fully qualified host name.

ID: 2355

Severity: INFO
Message: Root user password.

ID: 2356

Severity: INFO
Message: Enable LDAP?.

ID: 2357

Severity: INFO
Message: LDAP port.

ID: 2358

Severity: INFO
Message: Enable LDAPS?.

ID: 2359

Severity: INFO
Message: LDAPS port.

ID: 2360

Severity: INFO
Message: Administration connector port.

ID: 2361

Severity: INFO
Message: Start the server when setup is complete? Note: starting with version 7.0, it is advised to only start the server once it is customized for the intended deployment. If more configuration is needed, then select 'no'.

ID: 2362

Severity: INFO
Message: Global Parameters.

ID: 2363

Severity: INFO
Message: Network Parameters.

ID: 2364

Severity: INFO
Message: All Server Parameters.

ID: 2365

Severity: INFO
Message: Set up the server with the specified settings.

ID: 2366

Severity: INFO
Message: Start over.

ID: 2367

Severity: INFO
Message: Quit.

ID: 2368

Severity: INFO
Message: Equivalent non-interactive command:.

ID: 2369

Severity: INFO
Message: Accept these choices and continue?.

ID: 2370

Severity: ERROR
Message: Unable to encode provided password because '%s'.

ID: 2371

Severity: ERROR
Message: The fully qualified host name must be a non blank string.

ID: 2372

Severity: ERROR
Message: The provided keystore file '%s' must be an existing readable file.

ID: 2373

Severity: INFO
Message: Launch external process: '%s'.

ID: 2374

Severity: ERROR
Message: External process contains errors: %s.

ID: 2375

Severity: INFO
Message: External process standard output: %s.

ID: 2376

Severity: ERROR
Message: External process has been interrupted: '%s'.

ID: 2377

Severity: ERROR
Message: Unable to display license because '%s'.

ID: 2378

Severity: ERROR
Message: Unable to enable windows service (return code '%d'): %s.

ID: 2379

Severity: INFO
Message: Enable windows service command (return code '%d') output: %s.

ID: 2380

Severity: ERROR
Message: Unable to create server instance directory '%s'.

ID: 2381

Severity: ERROR
Message: The instance parent (%s) must be a valid existing directory.

ID: 2382

Severity: ERROR
Message: The instance path must be a directory.

ID: 2383

Severity: ERROR
Message: An error occurred while trying to read instance.loc file: %s.

ID: 2384

Severity: ERROR
Message: An error occurred while trying to write instance.loc file: %s.

ID: 2385

Severity: ERROR
Message: You cannot provide a keystore password without providing an existing keystore.

ID: 2386

Severity: ERROR
Message: You cannot specify certificate aliases without providing an existing keystore.

ID: 2387

Severity: ERROR
Message: You cannot specify truststore without providing an existing keystore.

ID: 2389

Severity: ERROR
Message: Unable to enable the file based HTTP access logger because: %s.

ID: 2390

Severity: ERROR
Message: An error occurred while writing password in configuration file: '%s'.

ID: 2391

Severity: ERROR
Message: An error occurred while attempting to update the HTTP connector port: '%s'.

ID: 2392

Severity: ERROR
Message: An error occurred while attempting to update the HTTPS connector: '%s'.

ID: 2393

Severity: ERROR
Message: An error occurred while attempting to update the port on which to listen for LDAP communication: %s.

ID: 2394

Severity: ERROR
Message: Unable to write configuration file '%s' (%s).

ID: 2395

Severity: ERROR
Message: Unable to write the upgrade version in '%s' file (%s).

ID: 2396

Severity: ERROR
Message: Unable to parse the version in '%s' file in order to initialize the content of the '%s' file.

ID: 2397

Severity: ERROR
Message: Unable to write file '%s' because: '%s'.

ID: 2398

Severity: ERROR
Message: Unable to edit runtime settings file because '%s'.

ID: 2399

Severity: ERROR
Message: An error occurred while copying file '%s' into '%s': '%s'.

ID: 2400

Severity: ERROR
Message: An error occurred while creating directory '%s'.

ID: 2401

Severity: ERROR
Message: Unable to set access permissions to allow write operations on file '%s'. Ensure that you have enough rights to change the access permissions on instance files.

ID: 2402

Severity: INFO
Message: Configuring server.

ID: 2403

Severity: INFO
Message: Validating parameters.

ID: 2404

Severity: ERROR
Message: The server can only be enabled as a windows service on a Windows operating system.

ID: 2405

Severity: INFO
Message: Port on which the server should listen for HTTP communication.

ID: 2406

Severity: INFO
Message: Port on which the server should listen for HTTPS communication.

ID: 2407

Severity: INFO
Message: Path were the instance should be set up.

ID: 2408

Severity: NOTICE
Message: /path/to/opendj.

ID: 2409

Severity: ERROR
Message: The provided certificate nickname '%s' could not be found. The keystore contains the following certificate nicknames: %s.

ID: 2410

Severity: ERROR
Message: The keystore contains the following certificate nicknames: %s.%nYou have to provide the nickname of the certificate you want to use.

ID: 2411

Severity: ERROR
Message: Could not access the %s keystore '%s'. Check that the content of the file corresponds to a valid keystore, that you have access rights to it and that a valid password has been provided if needed. Error details: %s.

ID: 2412

Severity: ERROR
Message: You must accept the product license to run setup. Either use interactive mode or the '--%s' option.

ID: 2413

Severity: ERROR
Message: The provided server install path '%s' must reference an existing directory.

ID: 2414

Severity: ERROR
Message: An unexpected error has been raised during setup: '%s'.

ID: 2415

Severity: ERROR
Message: Administration connector port '%d' is not in allowed range %d, %d.

ID: 2416

Severity: ERROR
Message: LDAP port '%d' is not in allowed range %d, %d.

ID: 2417

Severity: ERROR
Message: LDAPS port '%d' is not in allowed range %d, %d.

ID: 2418

Severity: ERROR
Message: HTTP port '%d' is not in allowed range %d, %d.

ID: 2419

Severity: ERROR
Message: HTTPS port '%d' is not in allowed range %d, %d.

ID: 2420

Severity: ERROR
Message: Replication port '%d' is not in allowed range %d, %d.

ID: 2421

Severity: ERROR
Message: Port '%d' is not in allowed range %d, %d.

ID: 2422

Severity: ERROR
Message: Value '%d' has been specified for different ports.

ID: 2423

Severity: ERROR
Message: The administrator user bind DN '%s' is invalid. %s.

ID: 2424

Severity: ERROR
Message: The root user DN cannot be empty.

ID: 2425

Severity: ERROR
Message: DN for the monitor user cannot be empty.

ID: 2426

Severity: ERROR
Message: Monitor user DN value '%s' is invalid because: %s.

ID: 2427

Severity: NOTICE
Message: This utility sets up an OpenDJ server. Use the %s option to list available profiles.

ID: 2428

Severity: INFO
Message: Done.

ID: 2429

Severity: INFO
Message: Enabling Windows service.

ID: 2430

Severity: INFO
Message: Error.

ID: 2431

Severity: INFO
Message: …​..

ID: 2432

Severity: INFO
Message: Starting directory server.

ID: 2433

Severity: INFO
Message: Configuring certificates.

ID: 2434

Severity: INFO
Message: An error occurred creating the temporary file.

ID: 2435

Severity: INFO
Message: Error Enabling Windows service.

ID: 2436

Severity: INFO
Message: Error Starting Directory Server.

ID: 2437

Severity: INFO
Message: Error Starting Directory Server. Error code: %s.

ID: 2438

Severity: INFO
Message: See %s for a detailed log of the failed operation.%nPlease report this error and provide the log file mentioned above.

ID: 2439

Severity: INFO
Message: An error occurred while configuring the certificates: %s.

ID: 2440

Severity: INFO
Message: Administration connector port.

ID: 2441

Severity: INFO
Message: Please read the License Agreement above.%nYou must accept the terms of the agreement before continuing with the installation.

ID: 2442

Severity: INFO
Message: Root user DN.

ID: 2443

Severity: ERROR
Message: The --%s option should only be provided when using a file based trust store option.

ID: 2444

Severity: INFO
Message: Provide the DN for the default monitor user.

ID: 2445

Severity: INFO
Message: Provide the password for the default monitor user:.

ID: 2446

Severity: INFO
Message: Confirm the password for the default monitor user:.

ID: 2447

Severity: INFO
Message: Define and enable a default user for querying monitoring information?.

ID: 2448

Severity: INFO
Message: Monitor user.

ID: 2449

Severity: INFO
Message: Monitor user password.

ID: 2450

Severity: INFO
Message: {monitorUserDn}.

ID: 2451

Severity: INFO
Message: {monitorUserPassword}.

ID: 2452

Severity: INFO
Message: DN of the default user allowed to query monitoring information.

ID: 2453

Severity: INFO
Message: Password of the default user allowed to query monitoring information.

ID: 2454

Severity: ERROR
Message: When specifying a default user for monitoring a password should also be provided.

ID: 2455

Severity: ERROR
Message: An error occurred while attempting to write the monitor user entry: %s.

ID: 2456

Severity: ERROR
Message: An error occurred while attempting to configure the backend for the monitor user: %s.

ID: 2457

Severity: ERROR
Message: Folder '%s' of the setup profile '%s' must be a readable existing folder.

ID: 2458

Severity: ERROR
Message: Last folder of profile '%s' path '%s' must be the profile version (two or three digits separated by either dot or hyphen, e.g /path/to/profile/6.5.0).

ID: 2459

Severity: ERROR
Message: Folder of the setup profile '%s' must contain a '%s' readable regular file.

ID: 2460

Severity: ERROR
Message: File '%s' from the setup profile '%s' must be a readable regular file.

ID: 2461

Severity: INFO
Message: Configuring profile %s.

ID: 2462

Severity: ERROR
Message: The '%s' setup profile failed: %s.

ID: 2463

Severity: INFO
Message: {name[:version]}.

ID: 2464

Severity: INFO
Message: Setup profile to apply when initially configuring the server. If the version is not specified, the most recent version older or equal to this OpenDJ version is used. Use this option multiple times to apply multiple profiles. This option cannot be combined with data import options. %s.

ID: 2465

Severity: INFO
Message: There are no setup profiles available for this OpenDJ version.

ID: 2466

Severity: INFO
Message: Available setup profiles: %s.

ID: 2467

Severity: INFO
Message: {[profileName/]parameterName:value}.

ID: 2468

Severity: INFO
Message: Assign a value to a setup profile parameter. Profile name must be provided if multiple profiles are provided, indicate the profile that a parameter applies to by using the profileName/parameterName format.

ID: 2469

Severity: INFO
Message: Display all available profiles.

ID: 2470

Severity: INFO
Message: Display profile parameters.

ID: 2471

Severity: INFO
Message: Profiles available with this OpenDJ version are:.

ID: 2472

Severity: INFO
Message: Use %s %s to list profile parameters.

ID: 2473

Severity: NOTICE
Message: Parameter(s) '%s' provided for profile '%s' is (are) not used in the profile.

ID: 2474

Severity: NOTICE
Message: Parameter '%s' is provided without any profile specification which is not allowed when multiple profiles are used.

ID: 2475

Severity: ERROR
Message: The parameter '%s' is required by profile '%s', but no value has been provided.

ID: 2476

Severity: ERROR
Message: Error in profile '%s': the default value for parameter '%s' cannot be derived from the SetupConfiguration method '%s' because no such method exists.

ID: 2477

Severity: ERROR
Message: Error in profile '%s': the default value for parameter '%s' cannot be derived from the SetupConfiguration method '%s' because the method invocation threw an error: %s.

ID: 2478

Severity: ERROR
Message: Invalid profile parameter value '%s'. Supported format is '%s'.

ID: 2479

Severity: ERROR
Message: Option to setup profile parameters have been provided but not the profile name. If you want to use a setup profile, please provide its name with the '%s' option.

ID: 2480

Severity: ERROR
Message: Setup profile '%s' cannot be found. %s.

ID: 2481

Severity: ERROR
Message: Profile '%s' has been specified multiple times. It is not possible to configure the server for multiple versions of the same profile. Please choose one version for this profile.

ID: 2482

Severity: ERROR
Message: Setup profile parameter '%s' has been provided multiple times with different values. Please either choose one value or prefix the option values with a profile name.

ID: 2483

Severity: ERROR
Message: Setup profile parameter '%s' references the profile '%s' which has not been provided on the command line. Setup profiles can be added on the command line with the '%s' option.

ID: 2484

Severity: ERROR
Message: Unable to read template file '%s'. Please ensure that the file exists and that you have appropriate permissions to read the file.

ID: 2485

Severity: ERROR
Message: Unable to read file '%s'. Please ensure that the file exists and that you have appropriate permissions to read the file.

ID: 2486

Severity: WARNING
Message: An error occurred while attempting to remove content of directory '%s': %s.

ID: 2487

Severity: ERROR
Message: An error occurred while substituting properties from profile '%s' resource file '%s': %s.

ID: 2488

Severity: ERROR
Message: An IO error occurred while running profile '%s': '%s'.

ID: 2489

Severity: ERROR
Message: Unable to create '%s' backend (%s).

ID: 2490

Severity: ERROR
Message: Unable to create replication domain for base DN '%s' (%s).

ID: 2491

Severity: ERROR
Message: No backend has been created in the profile.

ID: 2492

Severity: ERROR
Message: '%s' setup profile failed to import data contained in '%s' file(s) into '%s' backend. Import LDIF tool options: '%s'. Exception message:'%s'. Tool output: %s.

ID: 2493

Severity: ERROR
Message: Unable to import data.

ID: 2494

Severity: ERROR
Message: Unable to import data (%s).

ID: 2495

Severity: ERROR
Message: Unable to import generated users (%s).

ID: 2496

Severity: ERROR
Message: Unable to import data because some entries have been rejected.

ID: 2497

Severity: ERROR
Message: Unable to import data because some entries have been skipped.

ID: 2498

Severity: ERROR
Message: '%s' setup profile failed to import data contained in '%s' file(s) into '%s' backend because of rejected entries (listed in '%s'). Import LDIF tool options: '%s'. Tool output: %s.

ID: 2499

Severity: ERROR
Message: '%s' setup profile failed to import data contained in '%s' file(s) into '%s' backend because of skipped entries (listed in '%s'). Import LDIF tool options: '%s'. Tool output: %s.

ID: 2500

Severity: ERROR
Message: Unable to update server configuration.

IDs: 2501-3000

ID: 2501

Severity: ERROR
Message: '%s' setup profile failed to update server configuration file, dsconfig tool options: '%s'. Exception message:'%s'. Tool output: %s.

ID: 2502

Severity: ERROR
Message: Unable to add index for attribute '%s' (%s).

ID: 2503

Severity: INFO
Message: Available profiles:.

ID: 2504

Severity: INFO
Message: Enter profile number(s) separated by comma (leave empty to skip this step):.

ID: 2505

Severity: INFO
Message: Enter profile number(s) separated by comma [%s]:.

ID: 2506

Severity: INFO
Message: No profiles configured or data to be imported.

ID: 2507

Severity: INFO
Message: Confirm the %s:.

ID: 2508

Severity: INFO
Message: Provide a value for '%s'.

ID: 2509

Severity: INFO
Message: Value set for '%s'.

ID: 2510

Severity: INFO
Message: Configure server for profile '%s'.

ID: 2511

Severity: INFO
Message: Configure server for profile '%s (%s)'.

ID: 2512

Severity: ERROR
Message: Please provide a value having the following syntax: %s.

ID: 2513

Severity: ERROR
Message: The value '%s' for parameter '%s' in profile '%s' is invalid. Please provide a value having the following syntax: %s.

ID: 2514

Severity: ERROR
Message: The value '%s' for parameter '%s' in profile '%s' is invalid because it does not match any allowed values (%s).

ID: 2515

Severity: ERROR
Message: The value for password parameter '%s' of profile '%s' is invalid (%s).

ID: 2516

Severity: ERROR
Message: Unable to encode password associated to parameter '%s' of profile '%s' (%s).

ID: 2517

Severity: ERROR
Message: The value for domain parameter '%s' of profile '%s' cannot be blank.

ID: 2518

Severity: ERROR
Message: The value '%s' for domain parameter '%s' of profile '%s' is invalid (%s).

ID: 2519

Severity: ERROR
Message: The value for DN parameter '%s' of profile '%s' cannot be empty.

ID: 2520

Severity: WARNING
Message: Version %s not found, best match is %s.

ID: 2521

Severity: INFO
Message: Profile '%s (%s)' does not have any parameters.

ID: 2522

Severity: INFO
Message: %s (%s) parameters.

ID: 2523

Severity: INFO
Message: Parameter:.

ID: 2524

Severity: INFO
Message: Syntax:.

ID: 2525

Severity: INFO
Message: %s or configuration expression.

ID: 2526

Severity: INFO
Message: String.

ID: 2527

Severity: INFO
Message: Number.

ID: 2528

Severity: INFO
Message: Decimal number.

ID: 2529

Severity: INFO
Message: Password.

ID: 2530

Severity: INFO
Message: Domain name.

ID: 2531

Severity: INFO
Message: File or directory path.

ID: 2532

Severity: INFO
Message: One of the following values:.

ID: 2533

Severity: INFO
Message: host:port.

ID: 2534

Severity: INFO
Message: DN.

ID: 2535

Severity: INFO
Message: Description:.

ID: 2536

Severity: INFO
Message: Default:.

ID: 2537

Severity: INFO
Message: Derived from the setup global options.

ID: 2538

Severity: ERROR
Message: Unable to bootstrap the Directory Server configuration because of the following error: %s.

ID: 2539

Severity: ERROR
Message: Unable to find resource '%s' of profile '%s' in profile version folders.

ID: 2540

Severity: INFO
Message: Which version of '%s' do you want to use (minimum %s)?.

ID: 2541

Severity: INFO
Message: Specify the server ID for this server. An acceptable ID is an ASCII alpha-numeric string; it may also contain underscore and hyphen characters provided they are not the first character.

ID: 2542

Severity: INFO
Message: {serverId}.

ID: 2543

Severity: INFO
Message: Unique server ID (used for identifying the server in the topology).

ID: 2544

Severity: INFO
Message: Server ID.

ID: 2545

Severity: ERROR
Message: An error occurred while configuring the server ID or the advertised listen address in global configuration: %s.

ID: 2546

Severity: ERROR
Message: Server ID '%s' is not valid. A Server ID is an ASCII alpha-numeric string possibly containing underscore and hyphen characters.

ID: 2547

Severity: INFO
Message: Do you want to set a value for parameter '%s'?.

ID: 2548

Severity: INFO
Message: No value specified for '%s'.

ID: 2549

Severity: INFO
Message: Do you want to add another value for parameter '%s'?.

ID: 2550

Severity: INFO
Message: Provide hostname for '%s'.

ID: 2551

Severity: INFO
Message: Provide port for '%s'.

ID: 2552

Severity: INFO
Message: This utility configures profiles in an offline OpenDJ server instance. %s.

ID: 2553

Severity: INFO
Message: Path of the server instance where profiles should be setup.

ID: 2554

Severity: INFO
Message: Name of the profile to be configured. If the version is not specified, the most recent version older or equal to this OpenDJ version is used. Use this option multiple times to apply multiple profiles.

ID: 2555

Severity: INFO
Message: configure profiles in an offline OpenDJ server instance.

ID: 2556

Severity: ERROR
Message: You must select at least one profile by using the option '%s'. %s.

ID: 2557

Severity: ERROR
Message: Instance path '%s' is not a valid existing directory.

ID: 2558

Severity: ERROR
Message: Instance path '%s' does not contain an OpenDJ instance.

ID: 2559

Severity: ERROR
Message: An error occurred while initializing tool: %s.

ID: 2560

Severity: ERROR
Message: Profiles can be setup only when the server is offline, please stop the server and retry.

ID: 2561

Severity: ERROR
Message: An error occurred while reading file '%s': %s.

ID: 2562

Severity: ERROR
Message: Unable to setup the profile '%s' because it is already configured in the server.

ID: 2563

Severity: ERROR
Message: Unable to setup profiles '%s' because they are already configured in the server.

ID: 2564

Severity: INFO
Message: The deployment ID which should be used for securing the deployment. If no existing certificates are specified using the key-store and trust-store options then the deployment ID will also be used for securing all TLS network communication.

ID: 2565

Severity: INFO
Message: {deploymentId}.

ID: 2566

Severity: ERROR
Message: This deployment ID is using a key-pair generator which is not available in this Java environment. Retry the command with the Java environment that was used for generating this deployment ID.

ID: 2567

Severity: ERROR
Message: Unable to add certificates derived from deployment ID in keystore: %s.

ID: 2568

Severity: ERROR
Message: An error occurred while configuring replication: %s.

ID: 2569

Severity: INFO
Message: Deployment ID password.

ID: 2570

Severity: INFO
Message: {deploymentIdPassword}.

ID: 2571

Severity: INFO
Message: Provide the deployment ID password:.

ID: 2572

Severity: INFO
Message: Use deployment ID.

ID: 2573

Severity: ERROR
Message: An error occurred while attempting to update the administration connector port: %s.

ID: 2574

Severity: ERROR
Message: An error occurred while attempting to update the crypto manager in the Directory Server: %s.

ID: 2575

Severity: ERROR
Message: An error occurred while attempting to update the port on which to listen for LDAPS communication: %s.

ID: 2576

Severity: ERROR
Message: An error occurred while attempting to update the entry for the initial Directory Server root user: %s.

ID: 2577

Severity: ERROR
Message: Unable to bind to port %d. This port may already be in use, or you may not have permission to bind to it.

ID: 2578

Severity: ERROR
Message: Unable to bind to port %d. This port may already be in use, or you may not have permission to bind to it. On UNIX-based operating systems, non-root users may not be allowed to bind to ports 1 through 1024.

ID: 2579

Severity: ERROR
Message: Unable to write a required file. Make sure that the %s tool has sufficient permissions to create and write the file: %s.

ID: 2580

Severity: ERROR
Message: The root user password is missing, provide it with the --%s option.

ID: 2581

Severity: INFO
Message: install OpenDJ server.

ID: 2582

Severity: ERROR
Message: The provided password values do not match.

ID: 2583

Severity: INFO
Message: Use an existing certificate in a JCEKS keystore.

ID: 2584

Severity: INFO
Message: Use an existing certificate in a JKS keystore.

ID: 2585

Severity: INFO
Message: Use an existing certificate on a PKCS#11 token.

ID: 2586

Severity: INFO
Message: Use an existing certificate in a PKCS#12 keystore.

ID: 2587

Severity: INFO
Message: What would you like to do?.

ID: 2588

Severity: INFO
Message: Use nickname %s?.

ID: 2589

Severity: INFO
Message: Enable the server to run as a Windows Service?.

ID: 2590

Severity: INFO
Message: JCEKS keystore path:.

ID: 2591

Severity: INFO
Message: Java keystore (JKS) path:.

ID: 2592

Severity: INFO
Message: Keystore password:.

ID: 2593

Severity: INFO
Message: PKCS#12 keystore path:.

ID: 2594

Severity: ERROR
Message: Input tries limit reached (%d).

ID: 2595

Severity: ERROR
Message: Unable to resolve the server installation root directory.

ID: 2596

Severity: ERROR
Message: An error occurred while attempting to enable key manager provider entry: %s.

ID: 2597

Severity: INFO
Message: To see basic server status and configuration, you can launch %s.

ID: 2598

Severity: INFO
Message: Disabled.

ID: 2599

Severity: INFO
Message: Enabled.

ID: 2600

Severity: INFO
Message: Port on which the Administration Connector should listen for communication.

ID: 2601

Severity: INFO
Message: Nickname of a keystore entry containing a certificate that the server should use when negotiating secure connections using StartTLS or SSL. Multiple keystore entries may be provided by using this option multiple times.

ID: 2602

Severity: INFO
Message: Start the server when the configuration is completed.

ID: 2603

Severity: INFO
Message: Enable StartTLS to allow secure communication with the server using the LDAP port.

ID: 2604

Severity: INFO
Message: Enable the server to run as a Windows Service.

ID: 2605

Severity: INFO
Message: The fully-qualified directory server host name that will be used when generating certificates for LDAP SSL/StartTLS, the administration connector, and replication.

ID: 2606

Severity: INFO
Message: Port on which the Directory Server should listen for LDAP communication.

ID: 2607

Severity: INFO
Message: Port on which the Directory Server should listen for LDAPS communication. The LDAPS port will be configured and SSL will be enabled only if this option is explicitly specified.

ID: 2608

Severity: INFO
Message: DN for the initial root user for the Directory Server.

ID: 2609

Severity: INFO
Message: Password for the initial root user for the Directory Server.

ID: 2610

Severity: INFO
Message: Skip the check to determine whether the specified ports are usable.

ID: 2611

Severity: INFO
Message: Use certificate(s) in a PKCS#11 token that the server should use when accepting SSL-based connections or performing StartTLS negotiation.

ID: 2612

Severity: INFO
Message: Path of a PKCS#12 keystore containing the certificate(s) that the server should use when negotiating secure connections using StartTLS or SSL.

ID: 2613

Severity: INFO
Message: {path}.

ID: 2614

Severity: INFO
Message: Path of the file containing the keystore password. The specified path will be used as the configuration value in the new server.

ID: 2615

Severity: INFO
Message: {nickname}.

ID: 2616

Severity: INFO
Message: {rootUserDN}.

ID: 2617

Severity: INFO
Message: {rootUserPassword}.

ID: 2618

Severity: INFO
Message: {path}.

ID: 2619

Severity: INFO
Message: Path of the file containing the truststore password. The specified path will be used as the configuration value in the new server.

ID: 2620

Severity: ERROR
Message: The deployment ID password is missing, provide it with the --%s option.

ID: 2621

Severity: INFO
Message: Same as deployment ID password.

ID: 2622

Severity: INFO
Message: The addresses of one or more replication servers within the topology which the server should connect to for discovering the rest of the topology. Use syntax "hostname:port" or "[IPv6Address]:port" for IPv6 addresses.

ID: 2623

Severity: INFO
Message: {bootstrapReplicationServer}.

ID: 2624

Severity: INFO
Message: Port used for replication protocol communications with other servers. Use this option to configure a local replication server. When this option is not used, this server is configured as a standalone DS (no local replication server).

ID: 2625

Severity: INFO
Message: Replication port.

ID: 2626

Severity: INFO
Message: Replication (secure).

ID: 2627

Severity: INFO
Message: What are the hostname and port number of the server to replicate with? (e.g ds.example.com on port 8989).

ID: 2628

Severity: INFO
Message: Replication server hostname.

ID: 2629

Severity: ERROR
Message: '%s' is not a valid hostname.

ID: 2630

Severity: INFO
Message: Replication port on %s.

ID: 2631

Severity: INFO
Message: Do you want to add another replication server.

ID: 2632

Severity: INFO
Message: Do you want to specify a server to replicate with? This step can be skipped if this is the first server in the topology.

ID: 2633

Severity: INFO
Message: Replicate with server.

ID: 2634

Severity: INFO
Message: Error Installing Backup Cloud Extension for Directory Server: %s.

ID: 2635

Severity: INFO
Message: The Directory Server shutdown process has been initiated by task %s.

ID: 2636

Severity: INFO
Message: The Directory Server shutdown process has been initiated by task %s: %s.

ID: 2637

Severity: ERROR
Message: Unable to add one or more files to the server schema because no schema file names were provided in attribute %s of task entry %s.

ID: 2638

Severity: ERROR
Message: Unable to add one or more files to the server schema because the specified schema file %s does not exist in schema directory %s.

ID: 2639

Severity: ERROR
Message: Unable to add one or more files to the server schema because an error occurred while attempting to determine whether file %s exists in schema directory %s: %s.

ID: 2640

Severity: ERROR
Message: An error occurred while attempting to load the contents of schema file %s into the server schema: %s.

ID: 2641

Severity: ERROR
Message: Unable to add one or more files to the server schema because the server was unable to obtain a write lock on the schema entry %s after multiple attempts.

ID: 2642

Severity: ERROR
Message: You do not have sufficient privileges to modify the server schema.

ID: 2643

Severity: ERROR
Message: You do not have sufficient privileges to initiate a Directory Server backup or backup purge.

ID: 2644

Severity: ERROR
Message: You do not have sufficient privileges to initiate a Directory Server restore.

ID: 2645

Severity: ERROR
Message: You do not have sufficient privileges to initiate an LDIF import.

ID: 2646

Severity: ERROR
Message: You do not have sufficient privileges to initiate an LDIF export.

ID: 2647

Severity: ERROR
Message: You do not have sufficient privileges to initiate a Directory Server restart.

ID: 2648

Severity: ERROR
Message: You do not have sufficient privileges to initiate a Directory Server shutdown.

ID: 2649

Severity: ERROR
Message: An error occurred while attempting to notify a synchronization provider of type %s about the schema changes made by the add schema file task: %s.

ID: 2650

Severity: ERROR
Message: You do not have sufficient privileges to initiate an index rebuild.

ID: 2651

Severity: ERROR
Message: Invalid DN provided to the Initialize task: %s.

ID: 2652

Severity: ERROR
Message: Only users with the SERVER_LOCKDOWN privilege may place the server in lockdown mode.

ID: 2653

Severity: ERROR
Message: Only users with the SERVER_LOCKDOWN privilege connected from a loopback address may place the server in lockdown mode.

ID: 2654

Severity: ERROR
Message: Only users with the SERVER_LOCKDOWN privilege may cause the server to leave lockdown mode.

ID: 2655

Severity: ERROR
Message: Only users with the SERVER_LOCKDOWN privilege connected from a loopback address may cause the server to leave lockdown mode.

ID: 2656

Severity: ERROR
Message: You do not have sufficient privileges to terminate client connections.

ID: 2657

Severity: ERROR
Message: Unable to decode value %s as an integer connection ID.

ID: 2658

Severity: ERROR
Message: Attribute %s must be provided to specify the connection ID for the client to disconnect.

ID: 2659

Severity: ERROR
Message: Unable to decode value %s as an indication of whether to notify the client before disconnecting it. The provided value should be either 'true' or 'false'.

ID: 2660

Severity: INFO
Message: An administrator has terminated this client connection.

ID: 2661

Severity: ERROR
Message: There is no client connection with connection ID %s.

ID: 2662

Severity: INFO
Message: Add Schema File.

ID: 2663

Severity: INFO
Message: Backup.

ID: 2664

Severity: INFO
Message: Disconnect Client.

ID: 2665

Severity: INFO
Message: Lockdown.

ID: 2666

Severity: INFO
Message: Export.

ID: 2667

Severity: INFO
Message: Import.

ID: 2668

Severity: INFO
Message: Initialize Backend.

ID: 2669

Severity: INFO
Message: Initialize From Replica.

ID: 2670

Severity: INFO
Message: Leave Lockdown.

ID: 2671

Severity: INFO
Message: Rebuild Index.

ID: 2672

Severity: INFO
Message: Restore.

ID: 2673

Severity: INFO
Message: Set Generation ID.

ID: 2674

Severity: INFO
Message: Shutdown.

ID: 2675

Severity: INFO
Message: Unscheduled.

ID: 2676

Severity: INFO
Message: Disabled.

ID: 2677

Severity: INFO
Message: Waiting on start time.

ID: 2678

Severity: INFO
Message: Waiting on dependency.

ID: 2679

Severity: INFO
Message: Running.

ID: 2680

Severity: INFO
Message: Completed successfully.

ID: 2681

Severity: INFO
Message: Completed with errors.

ID: 2682

Severity: INFO
Message: Stopped by shutdown.

ID: 2683

Severity: INFO
Message: Stopped by error.

ID: 2684

Severity: INFO
Message: Stopped by administrator.

ID: 2685

Severity: INFO
Message: Canceled before starting.

ID: 2686

Severity: INFO
Message: Backend ID(s).

ID: 2687

Severity: INFO
Message: Backup Location.

ID: 2688

Severity: INFO
Message: LDIF File.

ID: 2689

Severity: INFO
Message: Backend ID.

ID: 2690

Severity: INFO
Message: Append To LDIF.

ID: 2691

Severity: INFO
Message: Compress LDIF.

ID: 2692

Severity: INFO
Message: Encrypt LDIF.

ID: 2693

Severity: INFO
Message: Sign Hash.

ID: 2694

Severity: INFO
Message: Include Attribute.

ID: 2695

Severity: INFO
Message: Exclude Attribute.

ID: 2696

Severity: INFO
Message: Include Filter.

ID: 2697

Severity: INFO
Message: Exclude Filter.

ID: 2698

Severity: INFO
Message: Include Branch.

ID: 2699

Severity: INFO
Message: Exclude Branch.

ID: 2700

Severity: INFO
Message: Wrap Column.

ID: 2701

Severity: INFO
Message: Backup Directory.

ID: 2702

Severity: INFO
Message: Backup ID.

ID: 2703

Severity: INFO
Message: LDIF File.

ID: 2704

Severity: INFO
Message: Backend ID.

ID: 2705

Severity: INFO
Message: Include Attribute.

ID: 2706

Severity: INFO
Message: Exclude Attribute.

ID: 2707

Severity: INFO
Message: Include Filter.

ID: 2708

Severity: INFO
Message: Exclude Filter.

ID: 2709

Severity: INFO
Message: Include Branch.

ID: 2710

Severity: INFO
Message: Exclude Branch.

ID: 2711

Severity: INFO
Message: Reject File.

ID: 2712

Severity: INFO
Message: Skip File.

ID: 2713

Severity: INFO
Message: Overwrite.

ID: 2714

Severity: INFO
Message: Skip Schema Validation.

ID: 2715

Severity: INFO
Message: Is Compressed.

ID: 2716

Severity: INFO
Message: Is Encrypted.

ID: 2717

Severity: INFO
Message: Clear Backend.

ID: 2718

Severity: INFO
Message: Process.

ID: 2719

Severity: INFO
Message: Cancel.

ID: 2720

Severity: INFO
Message: Disable.

ID: 2721

Severity: INFO
Message: Task was stopped by an administrator: %s.

ID: 2723

Severity: INFO
Message: Template File.

ID: 2724

Severity: INFO
Message: Random Seed.

ID: 2725

Severity: INFO
Message: Recurring.

ID: 2726

Severity: ERROR
Message: Index option cannot be specified when the rebuildAll or rebuildDegraded option is used.

ID: 2727

Severity: INFO
Message: Purge conflicts historical.

ID: 2728

Severity: ERROR
Message: Attribute %s has an invalid value. Reason: %s.

ID: 2729

Severity: INFO
Message: Reset change number index to begin with a given number and change.

ID: 2730

Severity: ERROR
Message: No changelog database was found for baseDN '%s'. Either the baseDN is not replicated or its changelog has not been enabled in this server.

ID: 2731

Severity: ERROR
Message: The change number index cannot be reset because this OpenDJ instance does not appear to be a replication server.

ID: 2732

Severity: ERROR
Message: Invalid change number (%d) specified, it must be greater than zero.

ID: 2733

Severity: ERROR
Message: Unable to reset the change number index: %s.

ID: 2734

Severity: ERROR
Message: The changes made by the add schema file task failed schema validation: %s.

ID: 2735

Severity: INFO
Message: Retrying.

ID: 2736

Severity: INFO
Message: Storage property.

ID: 2737

Severity: INFO
Message: Purge backup(s).

ID: 2738

Severity: INFO
Message: Backup location.

ID: 2739

Severity: INFO
Message: Backup ID(s).

ID: 2740

Severity: INFO
Message: Keep count.

ID: 2741

Severity: INFO
Message: Remove older than.

ID: 2742

Severity: INFO
Message: Force.

ID: 2743

Severity: INFO
Message: Backend name(s).

ID: 2744

Severity: ERROR
Message: Invalid DN provided to the Initialize Target task: %s.

ID: 2745

Severity: ERROR
Message: Invalid DN provided to the Purge Conflicts Historical task: %s.

ID: 2746

Severity: ERROR
Message: Invalid DN provided to the Reset Generation ID task: %s.

ID: 2747

Severity: INFO
Message: List available password storage schemes.

ID: 2748

Severity: INFO
Message: Clear-text password to encode or to compare against an encoded password.

ID: 2749

Severity: INFO
Message: Encoded password to compare against the clear-text password.

ID: 2750

Severity: INFO
Message: Scheme to use for the encoded password.

ID: 2751

Severity: ERROR
Message: An error occurred while parsing the command-line arguments: %s.

ID: 2752

Severity: ERROR
Message: No clear-text password was specified. Use --%s, --%s or --%s to specify the password to encode.

ID: 2753

Severity: ERROR
Message: No password storage scheme was specified. Use the --%s argument to specify the storage scheme.

ID: 2754

Severity: ERROR
Message: An unexpected error occurred while attempting to bootstrap the Directory Server client-side code: %s.

ID: 2755

Severity: ERROR
Message: An error occurred while trying to load the Directory Server configuration: %s.

ID: 2756

Severity: ERROR
Message: An error occurred while trying to load the Directory Server schema: %s.

ID: 2757

Severity: ERROR
Message: An error occurred while trying to initialize the core Directory Server configuration: %s.

ID: 2758

Severity: ERROR
Message: An error occurred while trying to initialize the Directory Server password storage schemes: %s.

ID: 2759

Severity: ERROR
Message: No password storage schemes have been configured for use in the Directory Server.

ID: 2760

Severity: ERROR
Message: Password storage scheme "%s" is not configured for use in the Directory Server.

ID: 2761

Severity: INFO
Message: The provided clear-text and encoded passwords match.

ID: 2762

Severity: INFO
Message: The provided clear-text and encoded passwords do not match.

ID: 2763

Severity: ERROR
Message: An error occurred while attempting to encode the clear-text password: %s.

ID: 2764

Severity: INFO
Message: Path to the LDIF file to write. All paths are relative to the server’s installation directory, which can be remote.

ID: 2765

Severity: INFO
Message: Append an existing LDIF file rather than overwriting it.

ID: 2766

Severity: INFO
Message: Backend ID for the backend to export.

ID: 2767

Severity: INFO
Message: Base DN of a branch to exclude from the LDIF export.

ID: 2768

Severity: INFO
Message: Attribute to include in the LDIF export.

ID: 2769

Severity: INFO
Message: Attribute to exclude from the LDIF export.

ID: 2770

Severity: INFO
Message: Filter to identify entries to include in the LDIF export.

ID: 2771

Severity: INFO
Message: Filter to identify entries to exclude from the LDIF export.

ID: 2772

Severity: INFO
Message: Column at which to wrap long lines (0 for no wrapping).

ID: 2773

Severity: INFO
Message: Compress the LDIF data as it is exported.

ID: 2774

Severity: ERROR
Message: Unable to decode exclude filter string "%s" as a valid search filter: %s.

ID: 2775

Severity: ERROR
Message: Unable to decode include filter string "%s" as a valid search filter: %s.

ID: 2776

Severity: ERROR
Message: Unable to decode base DN string "%s" as a valid distinguished name: %s.

ID: 2777

Severity: ERROR
Message: Multiple Directory Server backends are configured with the requested backend ID "%s".

ID: 2778

Severity: ERROR
Message: None of the Directory Server backends are configured with the requested backend ID "%s".

ID: 2779

Severity: ERROR
Message: Unable to decode exclude branch string "%s" as a valid distinguished name: %s.

ID: 2780

Severity: ERROR
Message: Unable to decode wrap column value "%s" as an integer.

ID: 2781

Severity: ERROR
Message: An error occurred while attempting to process the LDIF export: %s.

ID: 2782

Severity: ERROR
Message: Unable to load class %s referenced in configuration entry %s for use as a Directory Server backend: %s.

ID: 2783

Severity: ERROR
Message: Unable to create an instance of class %s referenced in configuration entry %s as a Directory Server backend: %s.

ID: 2784

Severity: INFO
Message: Path to the LDIF file to import. All paths are relative to the server’s installation directory, which can be remote.

ID: 2785

Severity: INFO
Message: Backend ID for the backend to import.

ID: 2786

Severity: INFO
Message: Base DN of a branch to exclude from the LDIF import.

ID: 2787

Severity: INFO
Message: Attribute to include in the LDIF import.

ID: 2788

Severity: INFO
Message: Attribute to exclude from the LDIF import.

ID: 2789

Severity: INFO
Message: Filter to identify entries to include in the LDIF import.

ID: 2790

Severity: INFO
Message: Filter to identify entries to exclude from the LDIF import.

ID: 2791

Severity: INFO
Message: Write rejected entries to the specified file.

ID: 2792

Severity: INFO
Message: Overwrite an existing rejects and/or skip file rather than appending to it.

ID: 2793

Severity: INFO
Message: LDIF file is compressed.

ID: 2794

Severity: ERROR
Message: Unable to decode exclude filter string "%s" as a valid search filter: %s.

ID: 2795

Severity: ERROR
Message: Unable to decode include filter string "%s" as a valid search filter: %s.

ID: 2796

Severity: ERROR
Message: Imported branches or backend IDs can not span across multiple Directory Server backends.

ID: 2797

Severity: ERROR
Message: None of the Directory Server backends are configured with the requested backend ID or base DNs that include the specified branches.

ID: 2798

Severity: ERROR
Message: Unable to decode exclude branch string "%s" as a valid distinguished name: %s.

ID: 2799

Severity: ERROR
Message: An error occurred while trying to open the rejects file %s for writing: %s.

ID: 2800

Severity: ERROR
Message: An error occurred while attempting to process the LDIF import: %s.

ID: 2801

Severity: INFO
Message: Base DN of a backend supporting indexing. Verification is performed on indexes within the scope of the given base DN.

ID: 2802

Severity: INFO
Message: Name of an index to be verified. For an attribute index this is simply an attribute name. Multiple indexes may be verified for completeness, or all indexes if no indexes are specified. An index is complete if each index value references all entries containing that value.

ID: 2803

Severity: INFO
Message: Specifies that a single index should be verified to ensure it is clean. An index is clean if each index value references only entries containing that value. Only one index at a time may be verified in this way.

ID: 2804

Severity: ERROR
Message: An error occurred while attempting to perform index verification: %s.

ID: 2805

Severity: ERROR
Message: Only one index at a time may be verified for cleanliness.

ID: 2806

Severity: ERROR
Message: The backend does not support indexing.

ID: 2807

Severity: ERROR
Message: The Directory Server backend with backend ID "%s" does not provide a mechanism for performing LDIF exports.

ID: 2808

Severity: ERROR
Message: The Directory Server backend with backend ID %s does not provide a mechanism for performing LDIF imports.

ID: 2809

Severity: INFO
Message: Base DN of a branch to include in the LDIF import.

ID: 2810

Severity: ERROR
Message: Unable to decode include branch string "%s" as a valid distinguished name: %s.

ID: 2811

Severity: ERROR
Message: Provided include base DN "%s" is not handled by the backend with backend ID %s.

ID: 2812

Severity: ERROR
Message: Multiple Directory Server backends are configured to support base DN "%s".

ID: 2813

Severity: ERROR
Message: None of the Directory Server backends are configured to support the requested base DN "%s".

ID: 2814

Severity: INFO
Message: Base DN of a branch to include in the LDIF export.

ID: 2815

Severity: ERROR
Message: Provided include base DN "%s" is not handled by the backend with backend ID %s.

ID: 2816

Severity: ERROR
Message: An error occurred while attempting to initialize the crypto manager: %s.

ID: 2817

Severity: ERROR
Message: An error occurred while attempting to initialize the subentry manager: %s.

ID: 2818

Severity: ERROR
Message: An error occurred while attempting to acquire an exclusive lock for backend %s: %s. This generally means some other process is still using this backend (e.g., it is in use by the Directory Server or a backup or LDIF export is in progress). The LDIF import cannot continue.

ID: 2819

Severity: WARNING
Message: An error occurred while attempting to release the exclusive lock for backend %s: %s. This lock should automatically be cleared when the import process exits, so no further action should be required.

ID: 2820

Severity: ERROR
Message: An error occurred while attempting to acquire a shared lock for backend %s: %s. This generally means that some other process has an exclusive lock on this backend (e.g., an LDIF import or a restore). The LDIF export cannot continue.

ID: 2821

Severity: WARNING
Message: An error occurred while attempting to release the shared lock for backend %s: %s. This lock should automatically be cleared when the export process exits, so no further action should be required.

ID: 2822

Severity: ERROR
Message: An error occurred while attempting to acquire a shared lock for backend %s: %s. This generally means that some other process has an exclusive lock on this backend (e.g., an LDIF import or a restore). The index verification cannot continue.

ID: 2823

Severity: WARNING
Message: An error occurred while attempting to release the shared lock for backend %s: %s. This lock should automatically be cleared when the verification process exits, so no further action should be required.

ID: 2824

Severity: INFO
Message: Skip schema validation during the LDIF import.

ID: 2825

Severity: INFO
Message: Use the authentication password syntax rather than the user password syntax.

ID: 2826

Severity: ERROR
Message: Authentication password storage scheme "%s" is not configured for use in the Directory Server.

ID: 2827

Severity: ERROR
Message: The provided password is not a valid encoded authentication password value: %s.

ID: 2828

Severity: ERROR
Message: An error occurred while attempting to initialize the password policy components: %s.

ID: 2829

Severity: INFO
Message: Reason the server is being stopped or restarted.

ID: 2830

Severity: INFO
Message: Indicates the date/time at which the shutdown operation will begin as a server task expressed in format YYYYMMDDhhmmssZ for UTC time or YYYYMMDDhhmmss for local time. A value of '0' will cause the shutdown to be scheduled for immediate execution. When this option is specified the operation will be scheduled to start at the specified time after which this utility will exit immediately.

ID: 2831

Severity: ERROR
Message: ERROR: Unable to decode the provided stop time. It should be in the form YYYYMMDDhhmmssZ for UTC time or YYYYMMDDhhmmss for local time.

ID: 2832

Severity: ERROR
Message: ERROR: An I/O error occurred while attempting to communicate with the Directory Server: %s.

ID: 2833

Severity: INFO
Message: Use quiet mode (no output).

ID: 2834

Severity: INFO
Message: Path to a MakeLDIF template to use to generate the import data.

ID: 2835

Severity: ERROR
Message: Neither the %s nor the %s argument was provided. One of these arguments must be given to specify the source for the LDIF data to be imported.

ID: 2836

Severity: ERROR
Message: Unable to parse the specified file %s as a MakeLDIF template file: %s.

ID: 2837

Severity: INFO
Message: Seed for the MakeLDIF random number generator. To always generate the same data with the same command, use the same non-zero seed value. A value of zero (the default) results in different data each time the tool is run.

ID: 2838

Severity: INFO
Message: Path to the file to watch for deletion.

ID: 2839

Severity: INFO
Message: Path to a file containing log output to monitor.

ID: 2840

Severity: INFO
Message: Maximum length of time in seconds to wait for the target file to be deleted before exiting.

ID: 2841

Severity: WARNING
Message: WARNING: Unable to open log file %s for reading: %s.

ID: 2842

Severity: INFO
Message: This utility can be used to encode user passwords with a specified storage scheme, or to determine whether a given clear-text value matches a provided encoded password.

ID: 2843

Severity: INFO
Message: This utility can be used to export data from a Directory Server backend in LDIF form.

ID: 2844

Severity: INFO
Message: This utility can be used to import LDIF data into a Directory Server backend, overwriting existing data. It cannot be used to append data to the backend database.

ID: 2845

Severity: INFO
Message: This utility can be used to request that the Directory Server stop running or perform a restart. When run without explicit connection options, this utility sends a signal to the OpenDJ process to stop the server. When run with explicit connection options, this utility connects to the OpenDJ administration port and creates a shutdown task to stop the server.

ID: 2846

Severity: INFO
Message: This utility ensures that index data is consistent within an indexed backend database. Stop the server before running this tool.

ID: 2847

Severity: INFO
Message: This utility can be used to wait for a file to be removed from the filesystem.

ID: 2848

Severity: ERROR
Message: The provided password is not a valid encoded user password value: %s.

ID: 2849

Severity: INFO
Message: Use the LDAP compare result as an exit code for the password comparison.

ID: 2850

Severity: INFO
Message: Exclude operational attributes from the LDIF export.

ID: 2851

Severity: INFO
Message: Server already stopped.

ID: 2852

Severity: INFO
Message: Stopping Server…​

ID: 2853

Severity: ERROR
Message: Could not find the service name for the server.

ID: 2854

Severity: ERROR
Message: An unexpected error occurred starting the server as a windows service.

ID: 2855

Severity: ERROR
Message: An unexpected error occurred stopping the server windows service.

ID: 2856

Severity: INFO
Message: This utility can be used to configure the server as a Windows service.

ID: 2857

Severity: INFO
Message: Enables the server as a Windows service.

ID: 2858

Severity: INFO
Message: Disables the server as a Windows service and stops the server.

ID: 2859

Severity: INFO
Message: Provides information about the state of the server as a Windows service.

ID: 2860

Severity: ERROR
Message: You can only provide one of the following arguments: enableService, disableService, serviceState or cleanupService.

ID: 2861

Severity: ERROR
Message: You must provide at least one of the following arguments: enableService, disableService or serviceState or cleanupService.

ID: 2862

Severity: INFO
Message: %s.

ID: 2863

Severity: INFO
Message: Next Generation Directory Server. Installation path: %s.

ID: 2864

Severity: INFO
Message: The server was successfully enabled to run as a Windows service.

ID: 2865

Severity: INFO
Message: The server was already enabled to run as a Windows service.

ID: 2866

Severity: ERROR
Message: The server could not be enabled to run as a Windows service. The service name is already in use.

ID: 2867

Severity: ERROR
Message: An unexpected error occurred trying to enable the server as a Windows service.%nCheck that you have administrator rights (only Administrators can enable the server to run as a Windows Service).

ID: 2868

Severity: INFO
Message: The server was successfully disabled as a Windows service.

ID: 2869

Severity: INFO
Message: The server was already disabled as a Windows service.

ID: 2870

Severity: WARNING
Message: The server has been marked for deletion as a Windows Service.

ID: 2871

Severity: ERROR
Message: An unexpected error occurred trying to disable the server as a Windows service%nCheck that you have administrator rights (only Administrators can disable the server as a Windows Service).

ID: 2872

Severity: INFO
Message: The server is enabled as a Windows service. The service name for the server is: %s.

ID: 2873

Severity: INFO
Message: The server is disabled as a Windows service.

ID: 2874

Severity: ERROR
Message: An unexpected error occurred trying to retrieve the state of the server as a Windows service.

ID: 2875

Severity: INFO
Message: Path to a file to which the command will write the output.

ID: 2876

Severity: WARNING
Message: WARNING: Unable to open output file %s for writing: %s.

ID: 2877

Severity: INFO
Message: Disables the server as a Windows service and removes the Windows registry information associated with the specified service.

ID: 2878

Severity: INFO
Message: Clean up of service %s was successful.

ID: 2879

Severity: ERROR
Message: Could not find the service with name %s.

ID: 2880

Severity: WARNING
Message: Service %s has been marked for deletion.

ID: 2881

Severity: ERROR
Message: An unexpected error occurred cleaning up the service %s.

ID: 2882

Severity: INFO
Message: This utility can be used to rebuild index data within an indexed backend database.

ID: 2883

Severity: INFO
Message: Base DN of a backend supporting indexing. Rebuild is performed on indexes within the scope of the given base DN.

ID: 2884

Severity: INFO
Message: Names of index(es) to rebuild. For an attribute index this is simply an attribute name. At least one index must be specified for rebuild. Cannot be used with the "--rebuildAll" option.

ID: 2885

Severity: ERROR
Message: An error occurred while attempting to perform index rebuild: %s.

ID: 2886

Severity: ERROR
Message: The backend does not support rebuilding of indexes.

ID: 2887

Severity: ERROR
Message: At least one index must be specified for the rebuild process.

ID: 2888

Severity: ERROR
Message: An error occurred while attempting to acquire a exclusive lock for backend %s: %s. This generally means that some other process has an lock on this backend or the server is running with this backend online. The rebuild process cannot continue.

ID: 2889

Severity: WARNING
Message: An error occurred while attempting to release the shared lock for backend %s: %s. This lock should automatically be cleared when the rebuild process exits, so no further action should be required.

ID: 2890

Severity: ERROR
Message: An error occurred while attempting to acquire a shared lock for backend %s: %s. This generally means that some other process has an exclusive lock on this backend (e.g., an LDIF import or a restore). The rebuild process cannot continue.

ID: 2891

Severity: ERROR
Message: The specified LDIF file %s cannot be read.

ID: 2892

Severity: INFO
Message: Count the number of entries rejected by the server and return that value as the exit code (values > 255 will be reduced to 255 due to exit code restrictions).

ID: 2893

Severity: INFO
Message: Write skipped entries to the specified file.

ID: 2894

Severity: ERROR
Message: An error occurred while trying to open the skip file %s for writing: %s.

ID: 2895

Severity: INFO
Message: Count the number of errors found during the verification and return that value as the exit code (values > 255 will be reduced to 255 due to exit code restrictions).

ID: 2896

Severity: INFO
Message: Remove all entries for all base DNs in the backend before importing.

ID: 2897

Severity: ERROR
Message: Neither the %s nor the %s argument was provided. One of these arguments must be given to specify the backend for the LDIF data to be imported to.

ID: 2898

Severity: INFO
Message: %s task %s scheduled to start immediately.

ID: 2899

Severity: ERROR
Message: This tool may only be used on UNIX-based systems.

ID: 2900

Severity: INFO
Message: Create an RC script or systemd service that may be used to start, stop, and restart the Directory Server on UNIX-based systems.

ID: 2901

Severity: INFO
Message: The path to the RC script to create.

ID: 2902

Severity: ERROR
Message: Unable to determine the path to the server root directory. Please ensure that the %s system property or the %s environment variable is set to the path of the server root directory.

ID: 2903

Severity: ERROR
Message: An error occurred while attempting to generate the RC script: %s.

ID: 2904

Severity: INFO
Message: List the base DNs in a backend.

ID: 2905

Severity: INFO
Message: The backend ID of the backend.

ID: 2906

Severity: INFO
Message: The base DN within the backend.

ID: 2907

Severity: INFO
Message: The name of the index.

ID: 2908

Severity: INFO
Message: Do not try to decode backend data to their appropriate types.

ID: 2909

Severity: INFO
Message: Shows the status of indexes for a backend base DN. This subcommand can take a long time to complete, as it reads all indexes for all backends.

ID: 2910

Severity: INFO
Message: Only show records with keys that should be ordered before the provided value using the comparator for the database container.

ID: 2911

Severity: INFO
Message: Only show records with keys that should be ordered after the provided value using the comparator for the database container.

ID: 2912

Severity: INFO
Message: Only show records whose data is no larger than the provided value.

ID: 2913

Severity: INFO
Message: Only show records whose data is no smaller than the provided value.

ID: 2914

Severity: INFO
Message: Backend ID.

ID: 2915

Severity: INFO
Message: Base DN.

ID: 2916

Severity: ERROR
Message: None of the Directory Server JE backends are configured with the requested backend ID %s.

ID: 2917

Severity: ERROR
Message: None of the entry containers are configured with the requested base DN %s in backend %s.

ID: 2918

Severity: ERROR
Message: Unable to decode base DN string "%s" as a valid distinguished name: %s.

ID: 2919

Severity: INFO
Message: Median.

ID: 2920

Severity: INFO
Message: Key Count.

ID: 2921

Severity: INFO
Message: Size.

ID: 2922

Severity: INFO
Message: Records.

ID: 2923

Severity: INFO
Message: Index Name.

ID: 2924

Severity: INFO
Message: Type.

ID: 2925

Severity: INFO
Message: Secure.

ID: 2926

Severity: INFO
Message: Entry Limit.

ID: 2927

Severity: INFO
Message: Mean.

ID: 2928

Severity: WARNING
Message: An error occurred while attempting to release the shared lock for backend %s: %s. This lock should automatically be cleared when the process exits, so no further action should be required.

ID: 2929

Severity: ERROR
Message: An error occurred while attempting to acquire a shared lock for backend %s: %s. This generally means that some other process has exclusive access to this backend (e.g., a restore or an LDIF import).

ID: 2930

Severity: INFO
Message: Over.

ID: 2931

Severity: INFO
Message: 80th.

ID: 2932

Severity: INFO
Message: 95th.

ID: 2933

Severity: INFO
Message: 99th.

ID: 2934

Severity: ERROR
Message: A sub-command must be specified.

ID: 2935

Severity: INFO
Message: The name of the user account under which the server should run.

ID: 2936

Severity: INFO
Message: The path to the Java installation that should be used to run the server.

ID: 2937

Severity: INFO
Message: A set of arguments that should be passed to the JVM when running the server.

ID: 2938

Severity: ERROR
Message: The directory %s specified as the OPENDJ_JAVA_HOME path does not exist or is not a directory.

ID: 2939

Severity: ERROR
Message: The argument '%s' is incompatible with '%s'.

ID: 2940

Severity: INFO
Message: This utility can be used to obtain a list of tasks scheduled to run within the Directory Server as well as information about individual tasks.

ID: 2941

Severity: INFO
Message: Print a summary of tasks.

ID: 2942

Severity: INFO
Message: ID of a particular task about which this tool will display information.

ID: 2943

Severity: INFO
Message: refresh.

ID: 2944

Severity: INFO
Message: cancel task.

ID: 2945

Severity: INFO
Message: view logs.

ID: 2946

Severity: INFO
Message: Enter the number of a task to cancel.

ID: 2947

Severity: ERROR
Message: Invalid menu item or task number '%s'.

ID: 2948

Severity: INFO
Message: ID.

ID: 2949

Severity: INFO
Message: Type.

ID: 2950

Severity: INFO
Message: Status.

ID: 2951

Severity: INFO
Message: Scheduled Start Time.

ID: 2952

Severity: INFO
Message: Actual Start Time.

ID: 2953

Severity: INFO
Message: Completion Time.

ID: 2954

Severity: INFO
Message: Dependencies.

ID: 2955

Severity: INFO
Message: Failed Dependency Action.

ID: 2956

Severity: INFO
Message: Log Message(s).

ID: 2957

Severity: INFO
Message: Last Log Message.

ID: 2958

Severity: INFO
Message: Email Upon Completion.

ID: 2959

Severity: INFO
Message: Email Upon Error.

ID: 2960

Severity: INFO
Message: Task %s canceled.

ID: 2961

Severity: ERROR
Message: Error retrieving task entry %s: %s.

ID: 2962

Severity: ERROR
Message: There are no tasks with ID %s.

ID: 2963

Severity: INFO
Message: Task Details.

ID: 2964

Severity: INFO
Message: %s Options.

ID: 2965

Severity: INFO
Message: No tasks exist.

ID: 2966

Severity: INFO
Message: None.

ID: 2967

Severity: INFO
Message: None Specified.

ID: 2968

Severity: INFO
Message: Immediate execution.

ID: 2969

Severity: INFO
Message: Error connecting to the directory server: '%s'. Verify that the connection options are correct and that the server is running.

ID: 2970

Severity: INFO
Message: ID of a particular task to cancel.

ID: 2971

Severity: INFO
Message: Show only tasks of this type.

ID: 2972

Severity: INFO
Message: {taskType}.

ID: 2973

Severity: INFO
Message: Show only tasks with this status.

ID: 2974

Severity: INFO
Message: {taskStatus}.

ID: 2975

Severity: ERROR
Message: Error canceling task '%s': %s.

ID: 2976

Severity: ERROR
Message: Error accessing logs for task '%s': %s.

ID: 2977

Severity: ERROR
Message: Task at index %d is not cancelable.

ID: 2978

Severity: INFO
Message: There are currently no cancelable tasks.

ID: 2979

Severity: ERROR
Message: There are no tasks defined with ID '%s'.

ID: 2980

Severity: ERROR
Message: Task '%s' has finished and cannot be canceled.

ID: 2981

Severity: ERROR
Message: State for task '%s' cannot be determined.

ID: 2982

Severity: INFO
Message: Indicates the date/time at which this operation will start when scheduled as a server task expressed in YYYYMMDDhhmmssZ format for UTC time or YYYYMMDDhhmmss for local time. A value of '0' will cause the task to be scheduled for immediate execution. When this option is specified the operation will be scheduled to start at the specified time after which this utility will exit immediately.

ID: 2983

Severity: ERROR
Message: The start date/time must in YYYYMMDDhhmmssZ format for UTC time or YYYYMMDDhhmmss for local time.

ID: 2984

Severity: INFO
Message: %s task %s scheduled to start %s.

ID: 2985

Severity: ERROR
Message: You have provided options for scheduling this operation as a task but options provided for connecting to the server’s tasks backend resulted in the following error: '%s'.

ID: 2986

Severity: INFO
Message: Task Scheduling Options.

ID: 2987

Severity: INFO
Message: Task Backend Connection Options.

ID: 2988

Severity: INFO
Message: Email address of a recipient to be notified when the task completes. This option may be specified more than once.

ID: 2989

Severity: INFO
Message: Email address of a recipient to be notified if an error occurs when this task executes. This option may be specified more than once.

ID: 2990

Severity: INFO
Message: ID of a task upon which this task depends. A task will not start execution until all its dependencies have completed execution.

ID: 2991

Severity: INFO
Message: Action this task will take should one if its dependent tasks fail. The value must be one of %s. If not specified defaults to %s.

ID: 2992

Severity: ERROR
Message: The option %s is only applicable when scheduling this operation as a task.

ID: 2993

Severity: ERROR
Message: The value %s for option %s is not a valid email address.

ID: 2994

Severity: ERROR
Message: The failed dependency action value %s is invalid. The value must be one of %s.

ID: 2995

Severity: ERROR
Message: The failed dependency action option is to be used in conjunction with one or more dependencies.

ID: 2996

Severity: ERROR
Message: Error: task %s is not in a cancelable state.

ID: 2997

Severity: INFO
Message: {ldifFile}.

ID: 2998

Severity: INFO
Message: {seed}.

ID: 2999

Severity: INFO
Message: {host}.

ID: 3000

Severity: INFO
Message: {baseDN}.

IDs: 3001-3500

ID: 3001

Severity: INFO
Message: {path}.

ID: 3002

Severity: INFO
Message: {filter}.

ID: 3003

Severity: INFO
Message: {backendName}.

ID: 3004

Severity: INFO
Message: {startTime}.

ID: 3005

Severity: INFO
Message: {emailAddress}.

ID: 3006

Severity: INFO
Message: {taskID}.

ID: 3007

Severity: INFO
Message: {action}.

ID: 3008

Severity: INFO
Message: {serviceName}.

ID: 3009

Severity: INFO
Message: {userName}.

ID: 3010

Severity: INFO
Message: {args}.

ID: 3011

Severity: INFO
Message: {databaseName}.

ID: 3012

Severity: INFO
Message: {maxKeyValue}.

ID: 3013

Severity: INFO
Message: {minKeyValue}.

ID: 3014

Severity: INFO
Message: {maxDataSize}.

ID: 3015

Severity: INFO
Message: {minDataSize}.

ID: 3016

Severity: INFO
Message: {clearPW}.

ID: 3017

Severity: INFO
Message: {encodedPW}.

ID: 3018

Severity: INFO
Message: {scheme}.

ID: 3019

Severity: INFO
Message: {branchDN}.

ID: 3020

Severity: INFO
Message: {attribute}.

ID: 3021

Severity: INFO
Message: {wrapColumn}.

ID: 3022

Severity: INFO
Message: {templateFile}.

ID: 3023

Severity: INFO
Message: {rejectFile}.

ID: 3024

Severity: INFO
Message: {skipFile}.

ID: 3025

Severity: INFO
Message: {index}.

ID: 3026

Severity: INFO
Message: {stopReason}.

ID: 3027

Severity: INFO
Message: {stopTime}.

ID: 3028

Severity: INFO
Message: {seconds}.

ID: 3029

Severity: INFO
Message: %s task %s has been successfully completed.

ID: 3030

Severity: INFO
Message: %s task %s did not complete successfully.

ID: 3031

Severity: INFO
Message: {schedulePattern}.

ID: 3032

Severity: ERROR
Message: An error occurred while attempting to initialize server components to run the tool: %s.

ID: 3033

Severity: ERROR
Message: The %s argument is not supported for online imports.

ID: 3034

Severity: INFO
Message: Indicates the task is recurring and will be scheduled according to the value argument expressed in crontab(5) compatible time/date pattern.

ID: 3035

Severity: INFO
Message: Recurring %s task %s scheduled successfully.

ID: 3036

Severity: INFO
Message: Exporting to %s.

ID: 3037

Severity: INFO
Message: yes.

ID: 3038

Severity: INFO
Message: y.

ID: 3039

Severity: INFO
Message: no.

ID: 3040

Severity: INFO
Message: n.

ID: 3041

Severity: ERROR
Message: The specified start time '%s' has already passed.

ID: 3042

Severity: ERROR
Message: The specified stop time '%s' has already passed.

ID: 3043

Severity: INFO
Message: r.

ID: 3044

Severity: INFO
Message: c.

ID: 3045

Severity: INFO
Message: l.

ID: 3046

Severity: ERROR
Message: The timeout of '%d' seconds has been reached. You can use the argument '--%s' to increase this timeout.

ID: 3047

Severity: INFO
Message: Path to temporary directory for index scratch files during LDIF import.

ID: 3048

Severity: INFO
Message: {directory}.

ID: 3049

Severity: INFO
Message: Number of threads used to read LDIF files during import. If 0, the number of threads will be set to twice the number of CPUs.

ID: 3050

Severity: INFO
Message: {count}.

ID: 3051

Severity: ERROR
Message: The value %s for threadCount cannot be parsed: %s.

ID: 3052

Severity: INFO
Message: The password to encode or to compare against an encoded password is interactively asked to the user.

ID: 3053

Severity: INFO
Message: Please enter the password :.

ID: 3054

Severity: INFO
Message: Please renter the password:.

ID: 3055

Severity: ERROR
Message: Provided passwords don’t matched.

ID: 3056

Severity: ERROR
Message: Cannot read password from the input: %s.

ID: 3057

Severity: INFO
Message: Rebuild all indexes, including any DN2ID, DN2URI, VLV and extensible indexes. Cannot be used with the "-i" option or the "--rebuildDegraded" option.

ID: 3058

Severity: INFO
Message: {directory}.

ID: 3059

Severity: INFO
Message: Path to temporary directory for index scratch files during index rebuilding.

ID: 3060

Severity: INFO
Message: {period}.

ID: 3061

Severity: INFO
Message: When this argument is specified, the status command will display its contents periodically. Used to specify the period (in seconds) between two displays of the status.

ID: 3062

Severity: ERROR
Message: The Windows Service was successfully configured but there was an error starting it. Error code starting Windows Service: %d.

ID: 3063

Severity: INFO
Message: Do not display backend data, just statistics.

ID: 3064

Severity: ERROR
Message: The provided schedule value has an invalid format. The schedule must be expressed using a crontab(5) format. Error details: %s.

ID: 3065

Severity: INFO
Message: Rebuild all degraded indexes, including any DN2ID, DN2URI, VLV and extensible indexes. Cannot be used with the "-i" option or the "--rebuildAll" option.

ID: 3066

Severity: INFO
Message: Indicates that indexes do not need rebuilding because they are known to be empty and forcefully marks them as valid. This is an advanced option which must only be used in cases where a degraded index is known to be empty and does not therefore need rebuilding.

ID: 3067

Severity: ERROR
Message: The version of the installed OpenDJ could not be determined because the version file '%s' could not be found. Restore it from backup before continuing.

ID: 3068

Severity: ERROR
Message: The version of the installed OpenDJ could not be determined because the version file '%s' exists but contains invalid data. Restore it from backup before continuing.

ID: 3069

Severity: ERROR
Message: The OpenDJ binary version '%s' does not match the installed configuration version '%s'. Please run upgrade before continuing.

ID: 3070

Severity: INFO
Message: Ignores any errors which occur during the upgrade. This option should be used with caution and may be useful in automated deployments where potential errors are known in advance and resolved after the upgrade has completed.

ID: 3071

Severity: INFO
Message: Forces a non-interactive upgrade to continue even if it requires user interaction. In particular, long running or critical upgrade tasks, such as re-indexing, which require user confirmation will be performed automatically. This option may only be used with the '%s' option.

ID: 3072

Severity: INFO
Message: Upgrades only application data. OpenDJ configuration must have been upgraded before.

ID: 3073

Severity: INFO
Message: Upgrades OpenDJ configuration and application data so that it is compatible with the installed binaries.%n%nThis tool should be run immediately after upgrading the OpenDJ binaries and before restarting the server.%n%nNOTE: this tool does not provide backup or restore capabilities. Therefore, it is the responsibility of the OpenDJ administrator to take necessary precautions before performing the upgrade.

ID: 3074

Severity: ERROR
Message: The upgrade failed to complete for the following reason: %s.

ID: 3075

Severity: INFO
Message: Performing upgrade.

ID: 3076

Severity: INFO
Message: OpenDJ Upgrade Utility.

ID: 3077

Severity: ERROR
Message: OpenDJ cannot be upgraded because the server is currently running. Please stop the server and try again.

ID: 3078

Severity: ERROR
Message: OpenDJ has already been upgraded to version %s.

ID: 3079

Severity: ERROR
Message: An unexpected error occurred while attempting to display a notification: %s.

ID: 3080

Severity: ERROR
Message: An unexpected error occurred while attempting to display a confirmation : %s.

ID: 3081

Severity: INFO
Message: …​Change(s) done in %s (x%s).

ID: 3082

Severity: INFO
Message: …​No change applied in %s.

ID: 3083

Severity: ERROR
Message: An error occurred while performing an upgrade task: %s.

ID: 3084

Severity: INFO
Message: %s.%nDo you want to make this change?.

ID: 3085

Severity: INFO
Message: The upgrade is ready to proceed. Do you wish to continue?.

ID: 3086

Severity: INFO
Message: The upgrade has been canceled.

ID: 3087

Severity: ERROR
Message: No %s with OID %s exists in the schema.

ID: 3088

Severity: ERROR
Message: An error occurred when trying to upgrade the config/upgrade folder: %s.

ID: 3089

Severity: INFO
Message: Preparing to upgrade.

ID: 3090

Severity: INFO
Message: This tool cannot be used for upgrading versions of OpenDJ which are older than '%s'. Please upgrade to the latest 6.5 revision first before attempting further upgrades.

ID: 3092

Severity: INFO
Message: Do you accept the License Agreement?.

ID: 3093

Severity: INFO
Message: An error occurred while copying the file '%s' to '%s'.

ID: 3094

Severity: INFO
Message: An error occurred while deleting directory '%s'. Check that you have the rights to delete this directory and that there is no other application using it. Error was: %s.

ID: 3095

Severity: INFO
Message: An error occurred while deleting file '%s': %s. Check that you have the rights to delete this file and that there is no other application using it.

ID: 3096

Severity: ERROR
Message: The upgrade failed because %d errors were encountered. Please check log for further details.

ID: 3097

Severity: ERROR
Message: An error occurred while copying the schema file '%s': %s.

ID: 3098

Severity: ERROR
Message: An error occurred while adding one or more attributes to the schema file '%s': %s.

ID: 3099

Severity: INFO
Message: See '%s' for a detailed log of this operation.

ID: 3100

Severity: INFO
Message: Replacing schema file '%s'.

ID: 3101

Severity: INFO
Message: Archiving concatenated schema.

ID: 3102

Severity: INFO
Message: Adding '%s' configuration file.

ID: 3103

Severity: ERROR
Message: An error occurred while adding configuration file '%s': %s.

ID: 3104

Severity: INFO
Message: Rebuilding index(es) %s for base dn(s): %s.

ID: 3105

Severity: INFO
Message: Rebuild index task ends.

ID: 3106

Severity: INFO
Message: Performing post upgrade tasks.

ID: 3107

Severity: INFO
Message: Post upgrade tasks complete.

ID: 3108

Severity: ERROR
Message: An error occurred during post upgrade task. Process aborted. Please check log for further details.

ID: 3110

Severity: INFO
Message: You have to rebuild all indexes manually to get a fully functional server.

ID: 3111

Severity: ERROR
Message: Invalid log file %s.

ID: 3112

Severity: INFO
Message: The rebuild index tool arguments are %s.

ID: 3113

Severity: INFO
Message: Rebuilding all indexes.

ID: 3114

Severity: INFO
Message: End of the upgrade process.

ID: 3115

Severity: ERROR
Message: '%s' is missing or empty, it is probably corrupted.

ID: 3116

Severity: INFO
Message: No indexes to rebuild for backend '%s'.

ID: 3117

Severity: INFO
Message: The classes folder has been renamed to '%s' to avoid compatibility issues.

ID: 3118

Severity: INFO
Message: List the pluggable backends.

ID: 3119

Severity: INFO
Message: List the low-level databases within a pluggable backend’s storage engine. This subcommand may take a long time to complete depending on the size of the backend.

ID: 3120

Severity: INFO
Message: List the indexes associated with a pluggable backend. This subcommand may take a long time to complete depending on the size of the backend.

ID: 3121

Severity: INFO
Message: Dump records from an index, decoding keys and values. Depending on index size, this subcommand can generate lots of output.

ID: 3122

Severity: INFO
Message: Dump the raw records in hexadecimal format for a low-level database within the pluggable backend’s storage engine. Depending on index size, this subcommand can generate lots of output.

ID: 3123

Severity: INFO
Message: Raw DB Name.

ID: 3124

Severity: ERROR
Message: An error occurred while listing the base DNs: %s.

ID: 3125

Severity: ERROR
Message: An error occurred while listing indexes: %s.

ID: 3126

Severity: ERROR
Message: An unexpected error occurred while attempting to initialize the backend '%s': %s.

ID: 3127

Severity: ERROR
Message: An unexpected error occurred while attempting to read and/or decode records from an index: %s.

ID: 3128

Severity: ERROR
Message: No index exists with the requested name '%s' in base DN '%s' and backend '%s'.

ID: 3129

Severity: ERROR
Message: Cannot specify a minimum key both as a string and as an hexadecimal string.

ID: 3130

Severity: ERROR
Message: Cannot specify a maximum key both as a string and as an hexadecimal string.

ID: 3131

Severity: ERROR
Message: An error occurred while processing arguments: %s.

ID: 3132

Severity: ERROR
Message: An error occurred while trying to execute %s: %s.

ID: 3133

Severity: INFO
Message: Total Keys.

ID: 3134

Severity: INFO
Message: Keys Size.

ID: 3135

Severity: INFO
Message: Values Size.

ID: 3136

Severity: INFO
Message: Total Size.

ID: 3137

Severity: INFO
Message: Uses SI Units for printing sizes.

ID: 3138

Severity: INFO
Message: Write hexadecimal data on a single line instead of pretty format.

ID: 3139

Severity: INFO
Message: %nTotal: %d%n.

ID: 3140

Severity: INFO
Message: %nIndex: %s%n.

ID: 3141

Severity: INFO
Message: Over index-entry-limit keys: %s%n.

ID: 3142

Severity: INFO
Message: %nTotal Records: %d%n.

ID: 3143

Severity: INFO
Message: Total / Average Key Size: %d bytes / %d bytes%n.

ID: 3144

Severity: INFO
Message: Total / Average Data Size: %d bytes / %d bytes%n.

ID: 3145

Severity: ERROR
Message: At key number %d, %s:.

ID: 3146

Severity: INFO
Message: Key (len %d):.

ID: 3147

Severity: INFO
Message: Value (len %d):.

ID: 3148

Severity: ERROR
Message: Data decoder for printing is not available, should use hex dump.

ID: 3149

Severity: ERROR
Message: No storage index exists with the requested name %s in backend %s.

ID: 3150

Severity: INFO
Message: This utility can be used to debug a backend.

ID: 3151

Severity: INFO
Message: {indexName}.

ID: 3152

Severity: INFO
Message: The raw database name.

ID: 3153

Severity: ERROR
Message: An error occurred while initializing server backends: %s.

ID: 3154

Severity: ERROR
Message: An error occurred while initializing plugins: %s.

ID: 3155

Severity: ERROR
Message: Subsystem %s should be initialized first.

ID: 3156

Severity: INFO
Message: OpenDJ configuration will be upgraded from version %s to %s.

ID: 3157

Severity: INFO
Message: OpenDJ data can’t be upgraded because the configuration has not been upgraded yet. Upgrade the configuration first before upgrading the data.

ID: 3158

Severity: INFO
Message: OpenDJ data will be upgraded from version %s to %s.

ID: 3159

Severity: INFO
Message: OpenDJ data will be upgraded to version %s.

ID: 3160

Severity: INFO
Message: OpenDJ data was successfully upgraded to version %s.

ID: 3161

Severity: ERROR
Message: OpenDJ data has already been upgraded to version %s.

ID: 3162

Severity: INFO
Message: OpenDJ configuration was successfully upgraded to version %s.

ID: 3163

Severity: ERROR
Message: The OpenDJ binary version '%s' does not match the installed data version '%s'. Please run 'upgrade --dataOnly' before continuing.

ID: 3164

Severity: INFO
Message: Upgrade failed to delete the obsolete file '%s'. Reason: %s.

ID: 3165

Severity: INFO
Message: This utility can be used to debug changelog and changenumber files.

ID: 3166

Severity: INFO
Message: Dump the change number DB.

ID: 3167

Severity: INFO
Message: Dump the replica DB for a given domain and replica.

ID: 3168

Severity: INFO
Message: Dump a replica DB file.

ID: 3169

Severity: INFO
Message: The output directory for the dump files.

ID: 3170

Severity: INFO
Message: The lower bound of the range of change numbers to dump.

ID: 3171

Severity: INFO
Message: The upper bound of the range of change numbers to dump.

ID: 3172

Severity: INFO
Message: The lower bound of the range of changes to dump.

ID: 3173

Severity: INFO
Message: The upper bound of the range of changes to dump.

ID: 3174

Severity: INFO
Message: {directory}.

ID: 3175

Severity: INFO
Message: {change number}.

ID: 3176

Severity: INFO
Message: {csn}.

ID: 3177

Severity: INFO
Message: The base-dn of the changes contained in the provided replica DB file.

ID: 3178

Severity: INFO
Message: {base dn}.

ID: 3179

Severity: ERROR
Message: An error occurred when reading the replication server configuration entry '%s': %s.

ID: 3180

Severity: ERROR
Message: The replication domain '%s' is not found. Make sure the domain is replicated.

ID: 3181

Severity: ERROR
Message: Replica DB folder '%s' not found.

ID: 3182

Severity: ERROR
Message: The provided change number '%s' is not valid.

ID: 3183

Severity: ERROR
Message: The provided CSN '%s' is not valid.

ID: 3184

Severity: ERROR
Message: The output folder '%s' cannot be created.

ID: 3185

Severity: ERROR
Message: The provided output folder '%s' doesn’t exist.

ID: 3186

Severity: ERROR
Message: The provided DN '%s' is invalid.

ID: 3187

Severity: ERROR
Message: Cannot list the changelog files in '%s': %s.

ID: 3188

Severity: ERROR
Message: Cannot convert the filename '%s' to a valid change number.

ID: 3189

Severity: ERROR
Message: Cannot convert the filename '%s' to a valid CSN.

ID: 3190

Severity: ERROR
Message: Error while decoding the changelog file '%s' : %s.

ID: 3191

Severity: INFO
Message: Arguments for changelogstat: %s.

ID: 3192

Severity: ERROR
Message: The OpenDJ binary version '%s' is older than the configuration version '%s', it usually means that an older version has been unzipped over the previous binaries. Unzip a more recent version than the configuration version and run upgrade again.

ID: 3193

Severity: ERROR
Message: The OpenDJ binary version '%s' is older than the data version '%s', it usually means that an older version has been unzipped over the previous binaries. Unzip a more recent version than the data version and run upgrade again.

ID: 3194

Severity: INFO
Message: OpenDJ will be upgraded from version %s to %s.

ID: 3195

Severity: INFO
Message: OpenDJ was successfully upgraded to version %s.

ID: 3196

Severity: INFO
Message: The upgrade will not be performed because the configuration file config.ldif could not be parsed.

ID: 3197

Severity: INFO
Message: Removing file '%s'.

ID: 3198

Severity: ERROR
Message: Unable to access the LDIF file %s to import. Please check that the file is local to the server and the path correct.

ID: 3199

Severity: INFO
Message: Removing configuration entries for the monitor providers.

ID: 3200

Severity: INFO
Message: Setting global server ID.

ID: 3201

Severity: INFO
Message: Setting new global server ID.

ID: 3202

Severity: ERROR
Message: Could not find a server ID to set for the server. Verify the configuration references a valid server ID for domain cn=admin data.

ID: 3203

Severity: INFO
Message: Setting global group ID and removing per domain values.

ID: 3204

Severity: WARNING
Message: Unable to find configuration for truststore backend "%s", using default values instead.

ID: 3205

Severity: WARNING
Message: Unable to find configuration for crypto manager "%s", replication SSL configuration will use default values.

ID: 3206

Severity: INFO
Message: Update replication SSL configuration from crypto manager and trust store backend to dedicated key and trust manager provider configuration elements.

ID: 3207

Severity: INFO
Message: Update replication SSL configuration.

ID: 3208

Severity: INFO
Message: Move SSL protocols and cipher suites configuration from crypto manager into each configuration element where they are used.

ID: 3209

Severity: INFO
Message: Removing global server ID from replication domains and replication server.

ID: 3210

Severity: INFO
Message: Adding Mail Servers.

ID: 3211

Severity: INFO
Message: Consolidating bootstrap replication servers from replication server and replication domains into Multimaster Synchronization provider.

ID: 3212

Severity: INFO
Message: Migrating truststore backend configuration to crypto manager.

ID: 3213

Severity: INFO
Message: Migrating truststore backend configuration.

ID: 3214

Severity: INFO
Message: Migrating security settings.

ID: 3215

Severity: ERROR
Message: Crypto manager configuration entry not found.

ID: 3216

Severity: NOTICE
Message: script to manage OpenDJ as a service on UNIX.

ID: 3217

Severity: NOTICE
Message: encode a password with a storage scheme.

ID: 3218

Severity: NOTICE
Message: export directory data in LDIF.

ID: 3219

Severity: NOTICE
Message: import directory data from LDIF.

ID: 3220

Severity: NOTICE
Message: manage server administration tasks.

ID: 3221

Severity: NOTICE
Message: rebuild index after configuration change.

ID: 3222

Severity: NOTICE
Message: start OpenDJ server.

ID: 3223

Severity: NOTICE
Message: display basic OpenDJ server information.

ID: 3224

Severity: NOTICE
Message: stop OpenDJ server.

ID: 3225

Severity: NOTICE
Message: upgrade OpenDJ configuration and application data.

ID: 3226

Severity: NOTICE
Message: check index for consistency or errors.

ID: 3227

Severity: NOTICE
Message: register OpenDJ server as a Windows Service.

ID: 3228

Severity: NOTICE
Message: gather OpenDJ backend debugging information.

ID: 3229

Severity: NOTICE
Message: debug changelog and changenumber files.

ID: 3230

Severity: NOTICE
Message: <xinclude:include href="description-upgrade.xml" />.

ID: 3231

Severity: ERROR
Message: The server has not been configured. Please run the 'setup' command first.

ID: 3232

Severity: NOTICE
Message: <xinclude:include href="variablelist-backendstat-index-status.xml" />.

ID: 3233

Severity: ERROR
Message: Rebuild index aborted: an error has occurred while rebuilding indexes for base DN '%s'.

ID: 3234

Severity: NOTICE
Message: <xinclude:include href="description-recurring-task-info.xml" />.

ID: 3235

Severity: ERROR
Message: An error occurred while reading configuration file: %s.

ID: 3236

Severity: ERROR
Message: An error occurred while copying data from '%s' to the server instance configuration directory. Error details: %s.

ID: 3238

Severity: INFO
Message: Reconfiguring PDB backends to JE backends.

ID: 3239

Severity: INFO
Message: Renaming PDB backend directory '%s' to '%s'.

ID: 3240

Severity: INFO
Message: You must reimport all your data into the JE backends in order to have a fully functional server.

ID: 3241

Severity: INFO
Message: Replacing low durability settings in JE backends.

ID: 3242

Severity: INFO
Message: Replacing high durability settings in JE backends.

ID: 3243

Severity: INFO
Message: Replacing medium durability settings in JE backends.

ID: 3244

Severity: INFO
Message: Renaming 'ds-cfg-json-schema' object class to 'ds-cfg-json-query-equality-matching-rule'.

ID: 3245

Severity: ERROR
Message: An error occurred while copying OpenDMK jar file '%s' to '%s': %s.

ID: 3246

Severity: INFO
Message: Migrating root DN '%s'.

ID: 3247

Severity: INFO
Message: Removing root DN users from configuration.

ID: 3248

Severity: ERROR
Message: Root DNs could not be migrated because the '%s' directory could not be created: %s.

ID: 3249

Severity: INFO
Message: OpenDJ 6.0.0 drops support for Root DNs and replaces them with standard user entries which are stored in LDIF backends. The root DN '%s' does not have an alias name so it must be renamed to '%s' so that it no longer resides inside the configuration. Do you want to proceed with the upgrade?.

ID: 3250

Severity: INFO
Message: OpenDJ 6.0.0 drops support for Root DNs and replaces them with standard user entries which are stored in LDIF backends. The root DN '%s' has multiple alias names, but only the alias name '%s' will be kept. Do you want to proceed with the upgrade?.

ID: 3251

Severity: INFO
Message: The upgrade will not be performed because some Root DNs need to be migrated.

ID: 3252

Severity: INFO
Message: Segregating mutable and immutable files.

ID: 3253

Severity: ERROR
Message: The directory '%s' could not be created: %s.

ID: 3254

Severity: ERROR
Message: The file '%s' could not be renamed to '%s': %s.

ID: 3255

Severity: INFO
Message: Update admin-backend.ldif file location.

ID: 3256

Severity: INFO
Message: Update tasks backend file location.

ID: 3257

Severity: INFO
Message: Replacing all pin related configuration attributes by a single pin configuration attribute.

ID: 3258

Severity: INFO
Message: The attribute has been removed because it was referring to a file that does not exist. You should replace it with the attribute %s before being able to enable the object corresponding to the configuration entry.

ID: 3259

Severity: INFO
Message: Removing send and receive window size configuration in replication.

ID: 3260

Severity: ERROR
Message: tool exit with error return code '%d'.

ID: 3261

Severity: INFO
Message: Migrating replication changelog files to 6.5.0 format.

ID: 3262

Severity: ERROR
Message: An error occurred reading the changelog files: %s.

ID: 3263

Severity: ERROR
Message: An error occurred while renaming the changelog files: %s.

ID: 3264

Severity: ERROR
Message: An error occurred while migrating replicas' offline states to the changelog files: %s.

ID: 3265

Severity: INFO
Message: Adding configuration entry '%s'.

ID: 3266

Severity: ERROR
Message: An error occurred while trying to modify %s : %s.

ID: 3267

Severity: INFO
Message: Replacing compute change number setting in replication server.

ID: 3268

Severity: INFO
Message: OpenDJ 6.5.0 changed the indexing algorithm for replication metadata. Its index must be rebuilt which may take a long time; without a working index every server start will take longer than normal. Do you want to rebuild the index automatically at the end of the upgrade?.

ID: 3269

Severity: INFO
Message: Replacing "reject unauthenticated requests" policy in global configuration.

ID: 3270

Severity: INFO
Message: Removing configuration for assured replication.

ID: 3271

Severity: INFO
Message: Removing generation-id data from configuration.

ID: 3272

Severity: INFO
Message: Removing synchronization state data from configuration.

ID: 3273

Severity: INFO
Message: Renaming the proxy backend configuration property 'service discovery mechanism' to 'shard'.

ID: 3274

Severity: INFO
Message: Adding objectClass to JSON, CSV, and External access logger configurations.

ID: 3275

Severity: ERROR
Message: Server is running. Please stop the server before running this tool.

ID: 3276

Severity: INFO
Message: Removing configuration for replication monitoring.

ID: 3277

Severity: ERROR
Message: An error occurred when trying to read the configuration version in %s : %s.

ID: 3278

Severity: ERROR
Message: An error occurred when trying to read the upgrade version in second line of file '%s' (%s).

ID: 3279

Severity: INFO
Message: Set the proxy backend configuration property 'hash-function' to MD5.

ID: 3280

Severity: INFO
Message: Use the old JE backend caches instead of the new shared cache.

ID: 3281

Severity: INFO
Message: Renaming ds-cfg-connection-pool-* attributes to ds-cfg-bind-connection-pool-*.

ID: 3282

Severity: INFO
Message: Set the database cache mode 'ds-cfg-db-cache-mode' to 'cache-ln'.

ID: 3283

Severity: INFO
Message: Add 'inheritFromDNParent' attribute type to the 'inheritedCollectiveAttributeSubentry' object class.

ID: 3284

Severity: NOTICE
Message: Could not find 'ads-certificate' entry in the truststore '%s'. This entry is required for the correct behavior of the directory server.

ID: 3285

Severity: WARNING
Message: Unable to retrieve the keys from the truststore.

ID: 3286

Severity: WARNING
Message: Unable to look up server key id '%s' in the admin backend.

ID: 3287

Severity: WARNING
Message: Unable to retrieve the hostname from the admin backend using the truststore as source of keys; 'advertised-listen-address' attribute in global configuration will use the local hostname as value. Cause: %s.

ID: 3288

Severity: NOTICE
Message: Unable to retrieve the local hostname, the 'advertised-listen-address' attribute in global configuration must be set manually.

ID: 3289

Severity: INFO
Message: Adding 'listen-address' and 'advertised-listen-address' attributes to the global configuration.

ID: 3290

Severity: INFO
Message: Removing 'listen-address' attributes that are redundant with default value provided by the global configuration.

ID: 3291

Severity: NOTICE
Message: An error occurred while removing some 'listen-address' attribute values from the configuration.

ID: 3292

Severity: INFO
Message: OpenDJ 7.0.0 changed the indexing algorithm for TelephoneNumber equality and substring matching rules. All TelephoneNumber syntax based attribute indexes must be rebuilt which may take a long time. Do you want to rebuild the indexes automatically at the end of the upgrade?.

ID: 3293

Severity: INFO
Message: Add ACI to make Root DSE fullVendorVersion operational attribute user visible.

ID: 3294

Severity: INFO
Message: Removing references to 'backup' backend.

ID: 3295

Severity: INFO
Message: Removing 'backup' backend.

ID: 3296

Severity: INFO
Message: Remove External change log domain configuration entries and migrate information to the domains and the replication server configuration entries.

ID: 3297

Severity: INFO
Message: Migrate source address attribute from replication server configuration to replication synchronization provider configuration.

ID: 3298

Severity: INFO
Message: Migrate common replication domain configuration attributes to replication synchronization provider configuration.

ID: 3299

Severity: NOTICE
Message: Configuration attribute %s has distinct values in replication domain configuration entries. Migration to replication synchronization provider configuration will keep only one value, '%s' and discarded '%s'.

ID: 3300

Severity: INFO
Message: Removing '%s' attribute(s) from backup tasks.

ID: 3301

Severity: ERROR
Message: '%s' attributes couldn’t be removed from backup tasks.

ID: 3302

Severity: INFO
Message: Removing restore tasks.

ID: 3303

Severity: ERROR
Message: The restore tasks couldn’t be removed.

ID: 3304

Severity: INFO
Message: DS 7.0.0 breaks restore tasks compatibility, all existing restore tasks will be removed.

ID: 3305

Severity: INFO
Message: Migrate isolation policy attribute to replication synchronization provider configuration.

ID: 3306

Severity: INFO
Message: Merge replication-purge-delay and conflicts-historical-purge-delay attribute into a single replication-purge-delay attribute in replication synchronizer provider configuration.

ID: 3307

Severity: ERROR
Message: An error occured when trying to read the configuration file %s: %s.

ID: 3308

Severity: WARNING
Message: Unable to find the task backend file location in the configuration file %s, entry '%s' or attribute '%s' is missing.

ID: 3309

Severity: INFO
Message: Removing profiler plugins.

ID: 3310

Severity: INFO
Message: Removing max-work-queue-capacity.

ID: 3311

Severity: INFO
Message: Migrating encrypted replication changelog files.

ID: 3312

Severity: ERROR
Message: An error occurred while migrating encrypted changelog files: %s.

ID: 3313

Severity: INFO
Message: Rename attribute 'ds-backup-directory-path' to 'ds-backup-location' in entries of objectClass '%s'.

ID: 3314

Severity: ERROR
Message: Attribute 'ds-backup-directory-path' could not be renamed to 'ds-backup-location' in entries of objectclass '%s'.

ID: 3315

Severity: INFO
Message: Renaming the 'use-mutual-tls' configuration property to 'use-sasl-external'.

ID: 3316

Severity: INFO
Message: Renaming the 'replication-server' configuration property to 'bootstrap-replication-server'.

ID: 3317

Severity: INFO
Message: The path to the systemd service file to create.

ID: 3318

Severity: ERROR
Message: An error occurred while attempting to generate the systemd service file: %s.

ID: 3319

Severity: INFO
Message: Gives an ID to the task.

ID: 3320

Severity: INFO
Message: {description}.

ID: 3321

Severity: INFO
Message: Gives a description to the task.

ID: 3322

Severity: INFO
Message: Description.

ID: 3323

Severity: INFO
Message: Allowing dsbackup purge tasks.

ID: 3324

Severity: INFO
Message: Removing empty configuration for groups.

ID: 3325

Severity: INFO
Message: Replacing non allowed comma in groupID definition with a dot.

ID: 3326

Severity: INFO
Message: Removing 'ds-cfg-load-balancing-algorithm' attribute from the proxy backend.

ID: 3327

Severity: INFO
Message: Renaming 'ds-cfg-bind-connection-pool-' attributes to 'ds-cfg-connection-pool-'.

ID: 3328

Severity: INFO
Message: Removing 'ds-cfg-request-connection-pool-size' attribute,'ds-cfg-connection-pool-size' will be used instead.

ID: 3329

Severity: INFO
Message: Add 'ldapSyntaxes' to attribute list which can be read in the schema access global access control policies.

ID: 3330

Severity: INFO
Message: Renaming replication changelog files from .log to .cdb suffix.

ID: 3331

Severity: ERROR
Message: Invalid sequence for task version: task %s tried to register for version %s but the previous task used a higher version: %s. This suggests there is a copy/paste error in the version number.

ID: 3332

Severity: INFO
Message: Renaming proxy 'ds-cfg-heartbeat-' attributes to 'ds-cfg-keep-alive-`.

ID: 3333

Severity: ERROR
Message: "Error parsing existing schema file '%s' - %s".

ID: 3334

Severity: INFO
Message: OpenDJ 7.2.0 fixed an indexing bug that may cause searches to return duplicate entries in certain circumstances. All indexes have to be rebuilt. This could take a long time to proceed. Do you want to launch this process automatically at the end of the upgrade?.

ID: 3335

Severity: INFO
Message: Removing look through limit from the configuration.

ID: 3336

Severity: INFO
Message: Renaming 'ds-cfg-cursor-entry-limit' to 'ds-cfg-max-candidate-set-size'.

ID: 3337

Severity: INFO
Message: Removing VLV indexes with base-object scope from the configuration.

ID: 3338

Severity: INFO
Message: Migrating JE environment properties to configuration attributes.

ID: 3339

Severity: INFO
Message: Removing replica degraded status threshold configuration.

ID: 3340

Severity: INFO
Message: Remove LDIF change record remnants from the configuration.

ID: 3341

Severity: INFO
Message: Changes in Unicode string normalization require that all indexes are rebuilt. Do you want to rebuild the indexes automatically at the end of the upgrade?.

ID: 3342

Severity: INFO
Message: Removing LDAP send reject notification configuration.

ID: 3343

Severity: INFO
Message: Removing debug logging configuration.

ID: 3344

Severity: INFO
Message: Replace multiple severity values by a single one in logging configurations.

ID: 3345

Severity: INFO
Message: Changing syntax for 'inheritAttribute' attribute type to IA5String.

ID: 3346

Severity: INFO
Message: OPENDJ-9550 on 7.3.0 caused static groups to lose their operational attributes on modify operations, corrupting data and the entryUUID index which needs to be rebuilt. Do you want to rebuild the indexes automatically at the end of the upgrade?.

ID: 3347

Severity: INFO
Message: The name of the group account under which the server should run.

ID: 3348

Severity: INFO
Message: {groupName}.

ID: 3349

Severity: ERROR
Message: You must provide either the --%s or the --%s argument.

ID: 3350

Severity: INFO
Message: Make the File-Based Error Loggers perform asynchronous logging for optimal performance after merging the debug and error logger.

ID: 3351

Severity: INFO
Message: Enabling change numbers in the replication changelog.

ID: 3352

Severity: INFO
Message: Removing 'ds-cfg-argon2-migration-memory' and adding 'ds-cfg-argon2-memory-pool-size' which specifies the size of the memory pool allocated for concurrent Argon2 password hashing computations.

ID: 3353

Severity: INFO
Message: Adding 'ds-cfg-exclude-values-of-attributes' with the list the attribute names which values will be excluded from the list of requested modifications.

ID: 3354

Severity: INFO
Message: Continue to allow invalid certificate lists, certificate pairs and postal addresses.

ID: 3355

Severity: INFO
Message: Renaming 'ds-cfg-big-index-matching-rule' attribute to 'ds-cfg-big-index-extensible-matching-rule`.

ID: 3356

Severity: ERROR
Message: The value %s cannot be decoded as a hexadecimal string because it does not have a length that is a multiple of two bytes.

ID: 3357

Severity: ERROR
Message: The value %s cannot be decoded as a hexadecimal string because it contains an illegal character %c that is not a valid hexadecimal digit.

ID: 3358

Severity: ERROR
Message: Unable to parse line %d ("%s") from the LDIF source because the line started with a space but there were no previous lines in the entry to which this line could be appended.

ID: 3359

Severity: ERROR
Message: Unable to parse LDIF entry starting at line %d because the line "%s" does not include an attribute name.

ID: 3360

Severity: ERROR
Message: Unable to parse LDIF entry starting at line %d because the first line does not contain a DN (the first line was "%s".

ID: 3361

Severity: ERROR
Message: Unable to parse LDIF entry starting at line %d because an error occurred while trying to parse the value of line "%s" as a distinguished name: %s.

ID: 3362

Severity: ERROR
Message: Unable to parse LDIF entry starting at line %d because it was not possible to base64-decode the DN on line "%s": %s.

ID: 3363

Severity: ERROR
Message: Unable to parse LDIF entry %s starting at line %d because it was not possible to base64-decode the attribute on line "%s": %s.

ID: 3364

Severity: WARNING
Message: Entry %s read from LDIF starting at line %d includes a duplicate attribute %s with value %s. The second occurrence of that attribute value has been skipped.

ID: 3365

Severity: ERROR
Message: Entry %s starting at line %d includes multiple values for single-valued attribute %s.

ID: 3366

Severity: ERROR
Message: Entry %s read from LDIF starting at line %d is not valid because it violates the server’s schema configuration: %s.

ID: 3367

Severity: ERROR
Message: The specified LDIF file %s already exists and the export configuration indicates that no attempt should be made to append to or replace the file.

ID: 3368

Severity: ERROR
Message: Unable to parse LDIF entry %s starting at line %d because the value of attribute %s was to be read from a URL but the URL was invalid: %s.

ID: 3369

Severity: ERROR
Message: Unable to parse LDIF entry %s starting at line %d because the value of attribute %s was to be read from URL %s but an error occurred while trying to read that content: %s.

ID: 3370

Severity: ERROR
Message: The specified reject file %s already exists and the import configuration indicates that no attempt should be made to append to or replace the file.

ID: 3371

Severity: ERROR
Message: An error occurred while attempting to determine whether LDIF entry "%s" starting at line %d should be imported as a result of the include and exclude filter configuration: %s.

ID: 3372

Severity: ERROR
Message: The provided sender address %s is invalid: %s.

ID: 3373

Severity: ERROR
Message: The provided recipient address %s is invalid: %s.

ID: 3374

Severity: ERROR
Message: The specified e-mail message could not be sent using any of the configured mail servers.

ID: 3375

Severity: ERROR
Message: The provided string "%s" cannot be decoded as an LDAP URL because it does not contain the necessary :// component to separate the scheme from the rest of the URL.

ID: 3376

Severity: ERROR
Message: The provided string "%s" cannot be decoded as an LDAP URL because it does not contain a protocol scheme.

ID: 3377

Severity: ERROR
Message: The provided string "%s" cannot be decoded as an LDAP URL because it does not contain a host before the colon to specify the port number.

ID: 3378

Severity: ERROR
Message: The provided string "%s" cannot be decoded as an LDAP URL because it does not contain a port number after the colon following the host.

ID: 3379

Severity: ERROR
Message: The provided string "%s" cannot be decoded as an LDAP URL because the port number portion %s cannot be decoded as an integer.

ID: 3380

Severity: ERROR
Message: The provided string "%s" cannot be decoded as an LDAP URL because the provided port number %d is not within the valid range between 1 and 65535.

ID: 3381

Severity: ERROR
Message: The provided string "%s" cannot be decoded as an LDAP URL because the scope string %s was not one of the allowed values of base, one, sub, or subordinate.

ID: 3382

Severity: ERROR
Message: The provided URL component "%s" could not be decoded because the percent character at byte %d was not followed by two hexadecimal digits.

ID: 3383

Severity: ERROR
Message: The provided URL component "%s" could not be decoded because the character at byte %d was not a valid hexadecimal digit.

ID: 3384

Severity: ERROR
Message: Cannot decode value "%s" as a named character set because it does not contain a colon to separate the name from the set of characters.

ID: 3385

Severity: ERROR
Message: The named character set is invalid because it does not contain a name.

ID: 3386

Severity: ERROR
Message: The named character set is invalid because the provide name "%s" has an invalid character at position %d. Only ASCII alphabetic characters are allowed in the name.

ID: 3387

Severity: ERROR
Message: Cannot decode value "%s" as a named character set because it does not contain a name to use for the character set.

ID: 3388

Severity: ERROR
Message: Cannot decode value "%s" as a named character set because there are no characters to include in the set.

ID: 3389

Severity: INFO
Message: %d seconds.

ID: 3390

Severity: INFO
Message: %d minutes, %d seconds.

ID: 3391

Severity: INFO
Message: %d hours, %d minutes, %d seconds.

ID: 3392

Severity: INFO
Message: %d days, %d hours, %d minutes, %d seconds.

ID: 3393

Severity: ERROR
Message: Unable to set permissions for file %s because it does not exist.

ID: 3394

Severity: ERROR
Message: One or more exceptions were thrown in the process of updating the file permissions for %s. Some of the permissions for the file may have been altered.

ID: 3395

Severity: ERROR
Message: The provided string %s does not represent a valid UNIX file mode. UNIX file modes must be a three-character string in which each character is a numeric digit between zero and seven.

ID: 3396

Severity: WARNING
Message: Entry %s read from LDIF starting at line %d includes value "%s" for attribute %s that is invalid according to the associated syntax: %s.

ID: 3397

Severity: ERROR
Message: The specified skip file %s already exists and the import configuration indicates that no attempt should be made to append to or replace the file.

ID: 3398

Severity: ERROR
Message: Skipping entry %s because the DN is not one that should be included based on the include and exclude branches/filters.

ID: 3399

Severity: ERROR
Message: The embedded server with server root '%s' cannot be started because it is already running.

ID: 3400

Severity: ERROR
Message: Skipping entry %s because the DN is excluded by the exclude branch "%s".

ID: 3401

Severity: ERROR
Message: Skipping entry %s because the DN is excluded by the exclude filter "%s".

ID: 3402

Severity: ERROR
Message: Skipping entry %s because the DN is not included by any include branches.

ID: 3403

Severity: ERROR
Message: Skipping entry %s because the DN is not included by any include filters.

ID: 3404

Severity: ERROR
Message: Rejecting entry %s because it was rejected by a plugin.

ID: 3405

Severity: ERROR
Message: Rejecting entry %s because it was rejected by a plugin: %s.

ID: 3406

Severity: ERROR
Message: Unable to parse LDIF entry %s starting at line %d because it has an invalid binary option for attribute %s.

ID: 3407

Severity: ERROR
Message: Skipping entry %s because the following error was received when reading its attributes: %s.

ID: 3408

Severity: ERROR
Message: An error occurred while attempting to obtain a list of the files in directory %s to include in the backup: %s.

ID: 3409

Severity: ERROR
Message: An error occurred while attempting to extract server archive '%s' before setup of embedded server with server root '%s': %s.

ID: 3410

Severity: ERROR
Message: An error occurred while attempting to rebuild index of embedded server with server root '%s': %s.

ID: 3411

Severity: ERROR
Message: An error occurred while attempting to start the embedded server with server root '%s' : %s.

ID: 3412

Severity: ERROR
Message: An error occurred while attempting to upgrade the embedded server with server root '%s' : %s.

ID: 3413

Severity: ERROR
Message: An error occurred while attempting to retrieve an internal connection to the server with the user DN '%s'.

ID: 3414

Severity: ERROR
Message: The setup from an archive can only be done with a server root directory named after the root directory contained in the archive: '%s'. The provided server root was: '%s'.

ID: 3415

Severity: ERROR
Message: An error occurred while attempting to initialize the configuration framework or to read the configuration file '%s'.

ID: 3416

Severity: ERROR
Message: An error occurred while attempting to import LDIF file '%s' into embedded server with server root '%s'. Import LDIF task state was '%s'. You can look at the task logs printed on the embedded server output stream for more details.

ID: 3417

Severity: ERROR
Message: An error occurred while attempting to import LDIF file '%s' into embedded server with server root '%s': '%s'.

ID: 3418

Severity: ERROR
Message: An error occurred while attempting to rebuild index of embedded server with server root '%s'. Rebuild task state was '%s'. You can look at the task logs printed on the embedded server output stream for more details.

ID: 3419

Severity: ERROR
Message: An error occurred while attempting to retrieve the configuration version of the directory server: '%s'.

ID: 3420

Severity: ERROR
Message: An error occurred while attempting to retrieve the data version of the directory server: '%s'.

ID: 3421

Severity: ERROR
Message: An error occurred while initializing configuration of embedded server with server root '%s': %s.

ID: 3422

Severity: ERROR
Message: The directory to move %s does not exist.

ID: 3423

Severity: ERROR
Message: The directory to move %s exists but is a file.

ID: 3424

Severity: ERROR
Message: The target directory %s already exists.

ID: 3425

Severity: ERROR
Message: Configuration error: an LDAP port or an LDAPS port must be configured before finishing configuring the embedded server.

ID: 3426

Severity: WARNING
Message: Embedded Directory Servers are NOT SUPPORTED in production.

ID: 3427

Severity: ERROR
Message: The Directory server DS(%s) and Replication server RS(%s) are working on different dataset regarding the domain '%s' : the Directory server DS(%s) will reject all modification operations and must be re-initialized.

ID: 3428

Severity: ERROR
Message: You do not have sufficient privileges to perform the sort request.

ID: 3430

Severity: INFO
Message: Renaming 'ds-cfg-log-control-oids' attribute to 'ds-cfg-log-controls'.

ID: 3431

Severity: INFO
Message: Removing SNMP support.

ID: 3432

Severity: INFO
Message: Performs disaster recovery on the local server. The subcommand has two forms.

The first form verifies each replica has the same data after recovery: on a replica, run dsrepl disaster-recovery --baseDn dc=example,dc=com --generate-recovery-id

The command prints the identifier to use on all other servers with the --generated-id option: dsrepl disaster-recovery --baseDn dc=example,dc=com --generated-id {identifier}

The second form uses an identifier you provide. It lets you automate the recovery process when you cannot use the first form. Do not use this form if the topology has standalone replication servers. With this form of the subcommand, you must ensure you recover each replica with the same data. Run the same subcommand on all servers. Example: dsrepl disaster-recovery --baseDn dc=example,dc=com --user-generated-id Recovery_Date_20240101

Read the documentation on disaster recovery carefully before using this command. ID: 3433:: Severity: INFO
Message: Generate a disaster recovery identifier during recovery. Use this for the first directory server in a replication topology with standalone RS servers. For all subsequent servers to recover, omit this option and use --generated-id {generatedRecoveryId} with the generated identifier. ID: 3434:: Severity: INFO
Message: Use the disaster recovery identifier generated on the first server. You must use the same identifier for all servers involved in the same disaster recovery procedure. ID: 3435:: Severity: NOTICE
Message: A mandatory argument is missing. Choose one and only one argument from '--generate-recovery-id', '--generated-id' and '--user-generated-id'. ID: 3436:: Severity: INFO
Message: {generatedRecoveryId}. ID: 3437:: Severity: ERROR
Message: Disaster recovery must be started on a directory server or a combined directory/replication server. ID: 3438:: Severity: ERROR
Message: An error occurred while computing the disaster recovery id for base DN '%s': %s. ID: 3439:: Severity: INFO
Message: Disaster recovery for base DN '%s' ended successfully on this server. ID: 3440:: Severity: INFO
Message: The disaster recovery process completed successfully for the first server. The next step is to restore the same data using the same procedure on all the remaining servers in the topology and run the following command on each server:. ID: 3441:: Severity: ERROR
Message: The disaster recovery procedure cannot be continued on this server because the domain '%s' does not contain the expected data. Make sure the server has been restored using exactly the same procedure used on the first server. ID: 3442:: Severity: ERROR
Message: An error occurred while rewriting the base entry of the domain '%s'. This server will not be able to connect to the servers which already have received the disaster recovery procedure. Make sure the filesystem is writeable and there is some free disk space, and try again. The error is: %s. ID: 3443:: Severity: ERROR
Message: An error occurred while clearing the changelog for the domain '%s'. This server will not be able to connect to the servers which have already completed the disaster recovery procedure. Make sure the filesystem at '%s' is readable with delete permissions and try again. The error is: %s. ID: 3444:: Severity: ERROR
Message: An error occurred while rewriting replication data for the domain '%s'. This server will not be able to connect to the servers which already have received the disaster recovery procedure. Make sure the filesystem at %s is writeable and there is some free disk space and try again. The error is: %s. ID: 3445:: Severity: ERROR
Message: An error occurred while clearing the change number index. The change number index on this server will expose erroneous data. Make sure the filesystem at '%s' is readable with delete permissions and try again. The error is: %s. ID: 3446:: Severity: ERROR
Message: The server is neither a replica nor a replication server for base DN '%s'. ID: 3447:: Severity: ERROR
Message: Disaster recovery for base DN '%s' failed on this server. ID: 3448:: Severity: WARNING
Message: The local replication server never received changes for base DN '%s'. Make sure you are running the disaster recovery on the right server. ID: 3449:: Severity: INFO
Message: Base DN of the domain to be recovered. ID: 3450:: Severity: ERROR
Message: The disaster recovery id '%s' is invalid. Verify the value of the disaster recovery id parameter matches the value printed when '--generate-recovery-id' was run on the first server. ID: 3451:: Severity: ERROR
Message: The provided base DN '%s' does not match the disaster recovery id '%s'. Please verify that the base DN and disaster recovery id correspond to the base DN and id from the first recovered server. ID: 3452:: Severity: INFO
Message: Starting disaster recovery on local server for base DN '%s'. ID: 3453:: Severity: ERROR
Message: The replication changelog file '%s' could not be deleted. Check file permissions and filesystem status. The error is: %s. ID: 3454:: Severity: ERROR
Message: The replication changelog files could not be retrieved. Check file permissions and filesystem status. The error is: %s. ID: 3455:: Severity: INFO
Message: Disaster recovery will erase replication metadata on this server. This server will then only be able to replicate changes with other recovered servers. You will have to run the recovery procedure on every other server of the topology. Servers which have not been recovered will not be able to connect to recovered servers anymore. ID: 3456:: Severity: INFO
Message: Continue the disaster recovery procedure. ID: 3457:: Severity: INFO
Message: dsrepl disaster-recovery --baseDn '%s' --generated-id %s. ID: 3458:: Severity: INFO
Message: Disaster recovery id: %s. ID: 3459:: Severity: INFO
Message: The disaster recovery process has been canceled, no operation was performed. This server may still not be operational. ID: 3460:: Severity: INFO
Message: Decodes one or more CSNs and displays them in a human readable JSON format. ID: 3461:: Severity: INFO
Message: csn [csn …​]. ID: 3462:: Severity: ERROR
Message: The CSN cannot be parsed as a valid CSN. ID: 3463:: Severity: NOTICE
Message: The current 7.4.0 server is configured to use an incompatible confidentiality setting which prevents automated upgrade from working. Follow the procedure detailed in the Upgrade Guide to upgrade this server. ID: 3464:: Severity: WARNING
Message: Peer replica '%s' is too late compared to changelog '%s' for domain '%s'. It asked for changes that are not present in the changelog or have been purged. The peer replica will no longer receive replicated changes and must be re-initialized. Diagnostic information follows: %s. ID: 3465:: Severity: WARNING
Message: Peer replica asked for changes from replica '%1$s' starting from %2$s (CSN '%3$s'), but changelog DB only contains changes starting from %4$s (CSN '%5$s'). The last recorded purge information in 'domains.state' is: last update CSN: %6$s, last message CSN: %7$s. The replica DB description is: number of files: %8$d, replica offline: %9$b. The replica DB newest file content is: oldest CSN: %10$s, newest CSN: %11$s, number of updates: %12$d, number of ReplicaOfflineMsg: %13$d. ID: 3466:: Severity: WARNING
Message: Peer replica asked for changes from replica '%s' starting from %s (CSN '%s'), but the changelog DB has purged this change, and the last known generated change timestamp is %s (CSN '%s'). The last recorded purge information in 'domains.state' is: last update CSN: %s, last message CSN: %s. ID: 3467:: Severity: WARNING
Message: Peer replica asked for changes from replica '%1$s' starting from %2$s (CSN '%3$s'), but changelog DB only contains changes starting from %4$s (CSN '%5$s'). The administrator explicitly decided to ignore the recorded purge information in 'domains.state' by setting the 'org.forgerock.opendj.allowReplicaPastPurgeDelay' system property to 'true'. The replica DB description is: number of files: %6$d, replica offline: %7$b. The replica DB newest file content is: oldest CSN: %8$s, newest CSN: %9$s, number of updates: %10$d, number of ReplicaOfflineMsg: %11$d. ID: 3468:: Severity: ERROR
Message: The provided disaster recovery id had version %d, but only version 1 is supported. Verify the value of the disaster recovery id parameter matches the value printed when '--generate-recovery-id' was run on the first server. ID: 3469:: Severity: WARNING
Message: Replication domain '%s' status '%s' is not healthy. ID: 3470:: Severity: INFO
Message: Updating existing Prometheus endpoints to keep using the legacy format. ID: 3471:: Severity: WARNING
Message: Property '%s' in %s '%s' is DEPRECATED for removal since %s. Its usage is highly discouraged. ID: 3472:: Severity: WARNING
Message: Property '%s' in %s '%s' is LEGACY since %s. Its usage is highly discouraged. ID: 3473:: Severity: ERROR
Message: There is no data in domain '%s' to run disaster recovery on. ID: 3474:: Severity: INFO
Message: Set the identifier for this recovery to {userGeneratedRecoveryId}, a string of your choice. Do not use this option if the replication topology has standalone RS servers. You must use the same identifier for all servers involved in the same disaster recovery procedure. ID: 3475:: Severity: INFO
Message: {userGeneratedRecoveryId}. ID: 3476:: Severity: ERROR
Message: Base Dn '%s' is not a replicated domain on this server. Disaster recovery must be run on a directory server or a combined directory/replication server. ID: 3477:: Severity: INFO
Message: Disaster recovery for domain '%s' has already been run with recovery ID '%s'. Verify all servers in the topology are being recovered with the same recovery ID. ID: 3478:: Severity: WARNING
Message: An error occurred while decoding a replicated request control: %s. ID: 3479:: Severity: WARNING
Message: An error occurred while decoding a internal modification control: %s. ID: 3480:: Severity: INFO
Message: Add a new HDAP authorization mechanism '%s'. ID: 3481:: Severity: INFO
Message: Replace the authentication mechanism of the '/hdap' endpoint '%s' with the new HDAP authorization mechanism '%s'. ID: 3482:: Severity: INFO
Message: Removing deprecated HTTP Basic DN and JWT authorization mechanisms. The HDAP authorization mechanism '%s' replaces them. ID: 3483:: Severity: ERROR
Message: The entry '%s' specified in the request does not exist in the Directory Server. ID: 3484:: Severity: ERROR
Message: The requested search operation included the persistent search control together with either the simple paged results control or the virtual list view control. These controls are mutually exclusive and cannot be used together. ID: 3485:: Severity: WARNING
Message: EXPERIMENTAL virtual threads support has been enabled. DO NOT USE in production. ID: 3486:: Severity: NOTICE
Message: Cannot continue the restore process, errors were encountered while reading the list of available backups: %s. ID: 3487:: Severity: NOTICE
Message: Cannot continue purging backups, errors were encountered while reading the list of available backups: %s. ID: 3488:: Severity: ERROR
Message: This server received a replication message to signal a disaster recovery. This means that this server is part of a mixed topology where the deprecated start-disaster-recovery command is used. The operation will continue, but it is not supported anymore and the disaster recovery procedure for mixed topologies must be used instead. ID: 3489:: Severity: INFO
Message: Hostname.