IDM 7.2.2

Manage reconciliation

To trigger, cancel, and monitor reconciliation operations over REST, use the openidm/recon REST endpoint. You can perform most of these actions using the admin UI.

Trigger a reconciliation

The following example triggers a reconciliation operation over REST based on the systemLdapAccounts_managedUser mapping:

curl \
--header "X-OpenIDM-Username: openidm-admin" \
--header "X-OpenIDM-Password: openidm-admin" \
--header "Accept-API-Version: resource=1.0" \
--request POST \
"http://localhost:8080/openidm/recon?_action=recon&mapping=systemLdapAccounts_managedUser"

By default, a reconciliation run ID is returned immediately when the reconciliation operation is initiated. Clients can make subsequent calls to the reconciliation service, using this reconciliation run ID to query its state, and to call operations on it. For an example, see Reconciliation Details.

The reconciliation run initiated previously would return something similar to the following:

{
  "_id": "05f63bce-4aaa-492e-9e86-a702d5c9d6c0-1144",
  "state": "ACTIVE"
}

To complete the reconciliation operation before the reconciliation run ID is returned, set the waitForCompletion property to true when the reconciliation is initiated:

curl \
--header "X-OpenIDM-Username: openidm-admin" \
--header "X-OpenIDM-Password: openidm-admin" \
--header "Accept-API-Version: resource=1.0" \
--request POST \
"http://localhost:8080/openidm/recon?_action=recon&mapping=systemLdapAccounts_managedUser&waitForCompletion=true"

To trigger this reconciliation using the admin UI, click Configure > Mappings, select a mapping, then click Reconcile.

If you click Cancel Reconciliation before it completes, you will need to start the reconciliation again.

Cancel a reconciliation

To cancel an in progress reconciliation, specify the reconciliation run ID. The following REST call cancels the reconciliation run initiated in the previous section:

curl \
--header "X-OpenIDM-Username: openidm-admin" \
--header "X-OpenIDM-Password: openidm-admin" \
--header "Accept-API-Version: resource=1.0" \
--request POST \
"http://localhost:8080/openidm/recon/0890ad62-4738-4a3f-8b8e-f3c83bbf212e?_action=cancel"

The output for a reconciliation cancellation request is similar to the following:

{
    "status":"INITIATED",
    "action":"cancel",
    "_id":"0890ad62-4738-4a3f-8b8e-f3c83bbf212e"
}

If the reconciliation run is waiting for completion before its ID is returned, obtain the reconciliation run ID from the list of active reconciliations, as described in the following section.

To cancel a reconciliation run in progress using the admin UI, click Configure > Mappings, click on the mapping reconciliation to cancel, and click Cancel Reconciliation.

List reconciliation history

Display a list of reconciliation processes that have completed, and those that are in progress, by running a RESTful GET on "http://localhost:8080/openidm/recon".

The following example displays all reconciliation runs:

curl \
--header "X-OpenIDM-Username: openidm-admin" \
--header "X-OpenIDM-Password: openidm-admin" \
--header "Accept-API-Version: resource=1.0" \
--request GET \
"http://localhost:8080/openidm/recon"
Example Output

The output is similar to the following, with one item for each reconciliation run:

"reconciliations": [
    {
      "_id": "05f63bce-4aaa-492e-9e86-a702d5c9d6c0-1144",
      "mapping": "systemLdapAccounts_managedUser",
      "state": "SUCCESS",
      "stage": "COMPLETED_SUCCESS",
      "stageDescription": "reconciliation completed.",
      "progress": {
        "source": {
          "existing": {
            "processed": 2,
            "total": "2"
          }
        },
        "target": {
          "existing": {
            "processed": 0,
            "total": "0"
          },
          "created": 2,
          "unchanged": 0,
          "updated": 0,
          "deleted": 0
        },
        "links": {
          "existing": {
            "processed": 0,
            "total": "0"
          },
          "created": 2
        }
      },
      "situationSummary": {
        "SOURCE_IGNORED": 0,
        "FOUND_ALREADY_LINKED": 0,
        "UNQUALIFIED": 0,
        "ABSENT": 2,
        "TARGET_IGNORED": 0,
        "MISSING": 0,
        "ALL_GONE": 0,
        "UNASSIGNED": 0,
        "AMBIGUOUS": 0,
        "CONFIRMED": 0,
        "LINK_ONLY": 0,
        "SOURCE_MISSING": 0,
        "FOUND": 0
      },
      "statusSummary": {
        "SUCCESS": 2,
        "FAILURE": 0
      },
      "durationSummary": {
        "sourceQuery": {
          "min": 42,
          "max": 42,
          "mean": 42,
          "count": 1,
          "sum": 42,
          "stdDev": 0
        },
        "auditLog": {
          "min": 0,
          "max": 1,
          "mean": 0,
          "count": 24,
          "sum": 15,
          "stdDev": 0
        },
        "linkQuery": {
          "min": 5,
          "max": 5,
          "mean": 5,
          "count": 1,
          "sum": 5,
          "stdDev": 0
        },
        "targetQuery": {
          "min": 3,
          "max": 3,
          "mean": 3,
          "count": 1,
          "sum": 3,
          "stdDev": 0
        },
        "targetPhase": {
          "min": 0,
          "max": 0,
          "mean": 0,
          "count": 1,
          "sum": 0,
          "stdDev": 0
        },
        "sourceObjectQuery": {
          "min": 6,
          "max": 34,
          "mean": 21,
          "count": 22,
          "sum": 474,
          "stdDev": 9
        },
        "postMappingScript": {
          "min": 0,
          "max": 1,
          "mean": 0,
          "count": 22,
          "sum": 17,
          "stdDev": 0
        },
        "onMappingScript": {
          "min": 0,
          "max": 4,
          "mean": 2,
          "count": 22,
          "sum": 48,
          "stdDev": 2
        },
        "sourcePhase": {
          "min": 490,
          "max": 490,
          "mean": 490,
          "count": 1,
          "sum": 490,
          "stdDev": 0
        }
      },
      "parameters": {
        "sourceQuery": {
          "resourceName": "system/ldap/account",
          "queryFilter": "true",
          "_fields": "_id"
        },
        "targetQuery": {
          "resourceName": "managed/user",
          "queryFilter": "true",
          "_fields": "_id"
        }
      },
      "started": "2020-05-07T09:14:57.740Z",
      "ended": "2020-05-07T09:14:58.325Z",
      "duration": 585,
      "sourceProcessedByNode": {}
    }
  ]

You can adjust the number of reconciliation runs that are stored in IDM by adding the maxAnalysisRunsPerMapping and maxNonAnalysisRunsPerMapping properties to your mapping:

"reconAssociation" : {
    "maxAnalysisRunsPerMapping" : 1,
    "maxNonAnalysisRunsPerMapping" : 3
}

In this context, analysis refers to reconciliation runs that are triggered with the analyze=true parameter. These runs don’t perform any actions, but determine which actions would be performed in a real reconciliation. Non-analysis refers to a normal reconciliation. The default value for both properties is 1.

In contrast, the admin UI displays the results of only the most recent reconciliation. For more information, see View reconciliation details using the admin UI.

Reconciliation Properties

Each reconciliation run includes the following properties:

_id

The ID of the reconciliation run.

mapping

The name of the mapping.

state

The high-level state of the reconciliation run. Values can be as follows:

  • ACTIVE

    The reconciliation run is in progress.

  • CANCELED

    The reconciliation run was successfully canceled.

  • FAILED

    The reconciliation run was terminated because of failure.

  • SUCCESS

    The reconciliation run completed successfully.

stage

The current stage of the reconciliation run. Values can be as follows:

  • ACTIVE_INITIALIZED

    The initial stage, when a reconciliation run is first created.

  • ACTIVE_QUERY_ENTRIES

    Querying the source, target, and possibly link sets to reconcile.

  • ACTIVE_RECONCILING_SOURCE

    Reconciling the set of IDs retrieved from the mapping source.

  • ACTIVE_RECONCILING_TARGET

    Reconciling any remaining entries from the set of IDs retrieved from the mapping target, that were not matched or processed during the source phase.

  • ACTIVE_LINK_CLEANUP

    Checking whether any links are now unused and should be cleaned up.

  • ACTIVE_PROCESSING_RESULTS

    Post-processing of reconciliation results.

  • ACTIVE_CANCELING

    Attempting to abort a reconciliation run in progress.

  • COMPLETED_SUCCESS

    Successfully completed processing the reconciliation run.

  • COMPLETED_CANCELED

    Completed processing because the reconciliation run was aborted.

  • COMPLETED_FAILED

    Completed processing because of a failure.

stageDescription

A description of the stages described previously.

progress

The progress object has the following structure (annotated here with comments):

"progress":{
  "source":{             // Progress on set of existing entries in the mapping source
    "existing":{
      "processed":1001,
        "total":"1001"   // Total number of entries in source set, if known, "?" otherwise
    }
  },
  "target":{             // Progress on set of existing entries in the mapping target
    "existing":{
      "processed":1001,
        "total":"1001"     // Total number of entries in target set, if known, "?" otherwise
    },
    "created":0          // New entries that were created
  },
  "links":{              // Progress on set of existing links between source and target
    "existing":{
      "processed":1001,
        "total":"1001"     // Total number of existing links, if known, "?" otherwise
    },
  "created":0            // Denotes new links that were created
  }
},

Reconciliation details

To display the details of a specific reconciliation over REST, include the reconciliation run ID in the URL. The following call shows the details of the reconciliation run initiated in Trigger a reconciliation.

curl \
--header "X-OpenIDM-Username: openidm-admin" \
--header "X-OpenIDM-Password: openidm-admin" \
--header "Accept-API-Version: resource=1.0" \
--request GET \
"http://localhost:8080/openidm/recon/05f63bce-4aaa-492e-9e86-a702d5c9d6c0-1144"
Example Output
{
  "_id": "05f63bce-4aaa-492e-9e86-a702d5c9d6c0-1144",
  "mapping": "systemLdapAccounts_managedUser",
  "state": "SUCCESS",
  "stage": "COMPLETED_SUCCESS",
  "stageDescription": "reconciliation completed.",
  "progress": {
    "source": {
      "existing": {
        "processed": 2,
        "total": "2"
      }
    },
    "target": {
      "existing": {
        "processed": 0,
        "total": "0"
      },
      "created": 2,
      "unchanged": 0,
      "updated": 0,
      "deleted": 0
    },
    "links": {
      "existing": {
        "processed": 0,
        "total": "0"
      },
      "created": 2
    }
  },
  "situationSummary": {
    "SOURCE_IGNORED": 0,
    "FOUND_ALREADY_LINKED": 0,
    "UNQUALIFIED": 0,
    "ABSENT": 2,
    "TARGET_IGNORED": 0,
    "MISSING": 0,
    "ALL_GONE": 0,
    "UNASSIGNED": 0,
    "AMBIGUOUS": 0,
    "CONFIRMED": 0,
    "LINK_ONLY": 0,
    "SOURCE_MISSING": 0,
    "FOUND": 0
  },
  "statusSummary": {
    "SUCCESS": 2,
    "FAILURE": 0
  },
  "durationSummary": {
    "sourceQuery": {
      "min": 42,
      "max": 42,
      "mean": 42,
      "count": 1,
      "sum": 42,
      "stdDev": 0
    },
    "auditLog": {
      "min": 0,
      "max": 1,
      "mean": 0,
      "count": 24,
      "sum": 15,
      "stdDev": 0
    },
    "linkQuery": {
      "min": 5,
      "max": 5,
      "mean": 5,
      "count": 1,
      "sum": 5,
      "stdDev": 0
    },
    "targetQuery": {
      "min": 3,
      "max": 3,
      "mean": 3,
      "count": 1,
      "sum": 3,
      "stdDev": 0
    },
    "targetPhase": {
      "min": 0,
      "max": 0,
      "mean": 0,
      "count": 1,
      "sum": 0,
      "stdDev": 0
    },
    "sourceObjectQuery": {
      "min": 6,
      "max": 34,
      "mean": 21,
      "count": 22,
      "sum": 474,
      "stdDev": 9
    },
    "postMappingScript": {
      "min": 0,
      "max": 1,
      "mean": 0,
      "count": 22,
      "sum": 17,
      "stdDev": 0
    },
    "onMappingScript": {
      "min": 0,
      "max": 4,
      "mean": 2,
      "count": 22,
      "sum": 48,
      "stdDev": 2
    },
    "sourcePhase": {
      "min": 490,
      "max": 490,
      "mean": 490,
      "count": 1,
      "sum": 490,
      "stdDev": 0
    }
  },
  "parameters": {
    "sourceQuery": {
      "resourceName": "system/ldap/account",
      "queryFilter": "true",
      "_fields": "_id"
    },
    "targetQuery": {
      "resourceName": "managed/user",
      "queryFilter": "true",
      "_fields": "_id"
    }
  },
  "started": "2020-05-07T09:14:57.740Z",
  "ended": "2020-05-07T09:14:58.325Z",
  "duration": 585,
  "sourceProcessedByNode": {}
}

View reconciliation details using the admin UI

You can display the details of the most recent reconciliation in the admin UI. Select the mapping. In the page that displays, you’ll see a message similar to:

Completed: Last reconciled November 20, 2019 15:28

Clicking on the reconciliation run date displays the details of the reconciliation run. Click Reconciliation Results for additional information.

If a reconciliation fails, select the Failure Summary tab for more information about the failure.

To view reconciliation audit logs in the UI, add an Audit widget to your dashboard. The reconciliation Audit widget shows the same information that you get over REST.

Reconciliation association details

When performing a reconciliation run, information is reconciled between the source object and the target object. This creates an association between the two objects, which can be recorded in IDM by including the persistAssociations=true parameter when triggering a reconciliation. This information can then be retrieved by querying the recon/assoc endpoint.

To get a list of currently stored recon associations, run the following query:

curl \
--header "X-OpenIDM-Username: openidm-admin" \
--header "X-OpenIDM-Password: openidm-admin" \
--header "Accept-API-Version: resource=1.0" \
--request GET \
"http://localhost:8080/openidm/recon/assoc?_queryFilter=true"
{
  "result": [
    {
      "_id": "da88b9a5-1fe5-4f8d-a6a8-7e0a2b4e136b-9230",
      "_rev": "1",
      "mapping": "managedUser_systemLdapAccounts",
      "sourceResourceCollection": "managed/user",
      "targetResourceCollection": "system/ldap/account",
      "isAnalysis": "false",
      "finishTime": "2019-05-01T23:36:24.434153Z"
    },
    {
      "_id": "da88b9a5-1fe5-4f8d-a6a8-7e0a2b4e136b-99638",
      "_rev": "1",
      "mapping": "systemLdapAccounts_managedUser",
      "sourceResourceCollection": "system/ldap/account",
      "targetResourceCollection": "managed/user",
      "isAnalysis": "true",
      "finishTime": "2019-05-06T21:31:42.140066Z"
    }
  ],
  "resultCount": 2,
  "pagedResultsCookie": null,
  "totalPagedResultsPolicy": "NONE",
  "totalPagedResults": -1,
  "remainingPagedResults": -1
}

You can also get information for a specific reconciliation by querying the recon ID:

curl \
--header "X-OpenIDM-Username: openidm-admin" \
--header "X-OpenIDM-Password: openidm-admin" \
--header "Accept-API-Version: resource=1.0" \
--request GET \
"http://localhost:8080/openidm/recon/assoc/da88b9a5-1fe5-4f8d-a6a8-7e0a2b4e136b-9230"
{
  "_id": "da88b9a5-1fe5-4f8d-a6a8-7e0a2b4e136b-9230",
  "_rev": "1",
  "mapping": "managedUser_systemLdapAccounts",
  "sourceResourceCollection": "managed/user",
  "targetResourceCollection": "system/ldap/account",
  "isAnalysis": "false",
  "finishTime": "2019-05-01T23:36:24.434153Z"
}

It is possible to also get the specific association details of each entry in the reconciliation run by appending /entry to your query:

curl \
--header "X-OpenIDM-Username: openidm-admin" \
--header "X-OpenIDM-Password: openidm-admin" \
--header "Accept-API-Version: resource=1.0" \
--request GET \
"http://localhost:8080/openidm/recon/assoc/da88b9a5-1fe5-4f8d-a6a8-7e0a2b4e136b-9230/entry?_queryFilter=true"
{
  "result": [
    {
      "_id": "400d40fd-da58-41f5-857b-71855eb97bd9",
      "_rev": "0",
      "mapping": "managedUser_systemLdapAccounts",
      "reconId": "da88b9a5-1fe5-4f8d-a6a8-7e0a2b4e136b-9230",
      "situation": "CONFIRMED",
      "action": "UPDATE",
      "linkQualifier": "default",
      "sourceObjectId": "07978ba5-b31d-4f8b-9f60-506c07f68495",
      "targetObjectId": "ca8abc7f-7b97-3e96-94fb-6b27b0ec5aed",
      "sourceResourceCollection": "managed/user",
      "targetResourceCollection": "system/ldap/account",
      "status": "SUCCESS",
      "exception": null,
      "message": null,
      "messageDetail": "null",
      "ambiguousTargetObjectIds": null
    },
    ...
    {
      "_id": "08ec633c-744f-4092-b88d-fe253b1d8e52",
      "_rev": "0",
      "mapping": "managedUser_systemLdapAccounts",
      "reconId": "da88b9a5-1fe5-4f8d-a6a8-7e0a2b4e136b-9230",
      "situation": "CONFIRMED",
      "action": "UPDATE",
      "linkQualifier": "default",
      "sourceObjectId": "ee2449a8-01e6-4c0b-84d3-e65e25c3e38c",
      "targetObjectId": "67a6596e-ebfc-3542-a664-1ab1610e082a",
      "sourceResourceCollection": "managed/user",
      "targetResourceCollection": "system/ldap/account",
      "status": "SUCCESS",
      "exception": null,
      "message": null,
      "messageDetail": "null",
      "ambiguousTargetObjectIds": null
    }
  ],
  ...
}

For particularly large reconciliations, the results returned can be quite substantial, since it includes the details of every object reconciled. We encourage using query filters to tune your queries to only return the subset of results you’re looking for.

Purge reconciliation statistics

When the number of completed reconciliation runs for a given mapping reaches the number specified by maxAnalysisRunsPerMapping or maxNonAnalysisRunsPerMapping, statistics are purged automatically. Statistics and reconciliation run information (such as recon associations) are purged chronologically by mapping, with the oldest reconciliation run for that mapping purged first.

You can also manually remove reconciliation statistics. To purge reconciliation statistics from the repository manually, run a DELETE command on the reconciliation run ID. For example:

curl \
--header "X-OpenIDM-Username: openidm-admin" \
--header "X-OpenIDM-Password: openidm-admin" \
--header "Accept-API-Version: resource=1.0" \
--request DELETE \
"http://localhost:8080/openidm/recon/da88b9a5-1fe5-4f8d-a6a8-7e0a2b4e136b-9230"