IDM 7.2.2

Filter synchronization data

By default, IDM synchronizes all objects that match those defined in the connector configuration for the resource. Many connectors let you limit the scope of objects that the connector accesses. For example, the LDAP connector lets you specify base DNs and LDAP filters so that you do not need to access every entry in the directory.

The following sections describe other ways to filter out objects or attributes to restrict the synchronization load.

Filter source and target objects with scripts

You can filter the source or target objects that are included in a synchronization operation using the validSource, validTarget, or sourceCondition properties in your mapping:

validSource

A script that determines if a source object is valid to be mapped.

The script yields a boolean value: true indicates that the source object is valid; false can be used to defer mapping until some condition is met. In the root scope, the source object is provided in the "source" property. If the script is not specified, then all source objects are considered valid:

{
    "validSource": {
        "type": "text/javascript",
        "source": "source.ldapPassword != null"
    }
}
validTarget

A script used during the second phase of reconciliation that determines if a target object is valid to be mapped.

The script yields a boolean value: true indicates that the target object is valid; false indicates that the target object should not be included in reconciliation. In the root scope, the source object is provided in the "target" property. If a validTarget the script is not specified, then all target objects are considered valid for mapping:

{
    "validTarget": {
        "type": "text/javascript",
        "source": "target.employeeType == 'internal'"
    }
}
sourceCondition

An additional filter that must be met for a source object to be included in a mapping.

This condition works like a validSource script. Its value can be either a queryFilter string, or a script configuration. sourceCondition is used mainly to specify that a mapping applies only to a particular role or entitlement.

The following sourceCondition restricts synchronization to those user objects whose account status is active:

{
    "mappings": [
        {
            "name": "managedUser_systemLdapAccounts",
            "source": "managed/user",
            "sourceCondition": "/source/accountStatus eq \"active\"",
        ...
        }
    ]
}

During synchronization, scripts and filters have access to a source object and a target object. Examples already shown in this section use source.attributeName to retrieve attributes from the source objects. Scripts can also write to target attributes using target.attributeName syntax, for example:

{
    "onUpdate": {
        "type": "text/javascript",
        "source": "if (source.email != null) {target.mail = source.email;}"
    }
}

The sourceCondition filter also has the linkQualifier variable in its scope.

For more information about scripting, see Scripting function reference.

Restrict reconciliation by using queries

Every reconciliation operation performs a query on the source and on the target resource, to determine which records should be reconciled. The default source and target queries are _queryFilter=true&_fields=_id, which means that all records in both the source and the target are considered candidates for that reconciliation operation.

You can restrict reconciliation to specific entries by defining an explicit sourceQuery or targetQuery in the mapping configuration.

The sourceQuery filter is ignored during the target phase, and the targetQuery filter is ignored during the source phase.

For example, to restrict reconciliation to those records whose employeeType on the source resource is Permanent, you might specify a source query as follows:

"mappings" : [
     {
         "name" : "managedUser_systemLdapAccounts",
         "source" : "managed/user",
         "target" : "system/ldap/account",
         "sourceQuery" : {
            "_queryFilter" : "employeeType eq \"Permanent\""
         },
...

The format of the query can be any query type that is supported by the resource, and can include additional parameters, if applicable. Use the _queryFilter parameter, in common filter notation.

The source and target queries send the query to the resource that is defined for that source or target, by default. You can override the resource the query is sent to by specifying a resourceName in the query. For example, to query a specific endpoint instead of the source resource, you might modify the preceding source query as follows:

{
    "mappings" : [
        {
            "name" : "managedUser_systemLdapAccounts",
            "source" : "managed/user",
            "target" : "system/ldap/account",
            "sourceQuery" : {
                "resourceName" : "endpoint/scriptedQuery"
                "_queryFilter" : "employeeType eq \"Permanent\""
            },
            ...
}

To override a source or target query that is defined in the mapping, you can specify the query when you call the reconciliation operation. For example, to reconcile all employee entries, and not just the permanent employees, you would run the reconciliation operation as follows:

curl \
--header "X-OpenIDM-Username: openidm-admin" \
--header "X-OpenIDM-Password: openidm-admin" \
--header "Accept-API-Version: resource=1.0" \
--header "Content-Type: application/json" \
--request POST \
--data '{"sourceQuery": {"_queryFilter" : "true"}}' \
"http://localhost:8080/openidm/recon?_action=recon&mapping=managedUser_systemLdapAccounts"

By default, a reconciliation operation runs both the source and target phase. To avoid queries on the target resource, set runTargetPhase to false in the mapping configuration. To prevent the target resource from being queried during the reconciliation operation configured in the previous example, amend the mapping configuration as follows:

{
    "mappings" : [
        {
            "name" : "systemLdapAccounts_managedUser",
            "source" : "system/ldap/account",
            "target" : "managed/user",
            "sourceQuery" : {
                "_queryFilter" : "employeeType eq \"Permanent\""
            },
            "runTargetPhase" : false,
   ...

Restrict reconciliation queries using the admin UI

  1. From the navigation bar, click Configure > Mappings.

  2. On the Mappings page, select the mapping to restrict.

  3. Click the Association tab, and expand the Reconciliation Query Filters node.

  4. Create a source or target query, and click Save.

Restrict reconciliation to a specific ID

You can restrict reconciliation to a specific record in much the same way as you restrict reconciliation by using queries.

To restrict reconciliation to a specific ID, use the reconById action, instead of the recon action when you call the reconciliation operation. Specify the ID with the id parameter. Reconciling more than one ID with the reconById action is not supported.

The following command reconciles only the user with ID b3c2f414-e7b3-46aa-8ce6-f4ab1e89288c, for the mapping managedUser_systemLdapAccounts. The command synchronizes this particular user account in LDAP with the data from the managed user repository. The example assumes that implicit synchronization has been disabled, and that a reconciliation operation is required to copy changes made in the repository to the LDAP system:

curl \
--header "X-OpenIDM-Username: openidm-admin" \
--header "X-OpenIDM-Password: openidm-admin" \
--header "Accept-API-Version: resource=1.0" \
--request POST \
"http://localhost:8080/openidm/recon?_action=reconById&mapping=managedUser_systemLdapAccounts&id=b3c2f414-e7b3-46aa-8ce6-f4ab1e89288c"

Reconciliation by ID takes the default reconciliation options that are specified in the mapping, so the source and target queries, and source and target phases apply equally to reconciliation by ID.

Restrict implicit synchronization to specific property changes

For a mapping that has managed objects as the source, an implicit synchronization is triggered if any source property changes, regardless of whether the modified property is explicitly defined as a source property in the mapping.

This default behavior is helpful in situations where no source properties are explicitly defined—any property within the object is included as part of the mapping.

However, this behavior adds a processing overhead, because every mapping from the managed object is invoked when any managed object property changes. If several mappings are configured from the managed object, this default behavior can cause performance issues.

In these situations, you can restrict the properties that should trigger an implicit synchronization per mapping, using the triggerSyncProperties attribute. This attribute contains an array of JSON pointers to the properties that must change before an implicit synchronization to the target is triggered. If none of these properties changes, no synchronization is triggered, even if other properties in the object change.

In the following example, implicit synchronization is triggered only if the mail, telephoneNumber, or userName of an object changes:

{
    "mappings" : [
        {
            "name" : "managedUser_systemLdapAccounts",
            "source" : "managed/user",
            "target" : "system/ldap/account",
            "enableLinking" : false,
            "triggerSyncProperties" : [
                "/mail",
                "/telephoneNumber",
                "/userName"
            ],
            "properties" : [],
            "policies" : []
        }
    ]
}

If any other property changes on the managed object, no implicit synchronization is triggered.